Klein Tools VDV500-123 Handleiding

Klein Tools Meetapparatuur VDV500-123

Lees hieronder de 📖 handleiding in het Nederlandse voor Klein Tools VDV500-123 (33 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/33

ENGLISH

GENERAL SPECIFICATIONS - VDV500-063 TONER-PRO

The Klein Tools VDV500-063 Toner-Pro is a professional-series tone generator for wire identification, wire

tracing and wire pair identification on non-energised wires. It features several tone frequencies and a strong

power output for tracing wires.

• Operating Altitude: 6562' (2000 m) maximum

• Relative Humidity: 10% to 90%, non-condensing

• Operating Temp: 14° to 122°F (-10° to 50°C)

• Storage Temp: -4° to 140°F (-20° to 60°C)

• Dimensions: 2.5" x 5" x 1" (64 x 127 x 25 mm)

• Weight: 7.4 oz (210 g) including batteries

• Battery Type: 4 x 1.5V AAA Alkaline

• Battery Life: Active: 120 hours

Standby/Storage: 3 years

• Auto Power-Off: After 60 minutes of inactivity

• Tones: Constant: 800 Hz, 1000 Hz, 1500 Hz

Alternating: 800/1000 Hz, 1000/1500 Hz

• Tone Power: 8 dBm

• Continuity Indication: Less than 10kΩ

• Voltage Protection: Test Mode: 60 V

Tone Mode:

20 V through external 600 Ω

Specifications subject to change.

TEST MODE Indicator

Power On/Off Button

‘NRM’ (Normal) Polarity Indicator

T10

TEST/TONE Button

‘REV’ (Reverse) Polarity Indicator

T11

Battery Status Indicator

‘CONT’ (Continuity) Indicator

T12

Lanyard Slot

TONE MODE Indicator

T13

RJ11 Test Plug

Tone Frequency Indicators

T14

ABN (Angled Bed-of-Nails) Test

Tone Mode Down selector button

T15

Battery Cover

Tone Mode Up selector button

T16

Battery Cover Screw (No. 2 Phill

T10

T13

T12

T14

T11

FEATURE DETAILS

T16

T15

GENERAL SPECIFICATIONS - VDV500-123 PROBE-PRO

The Klein Tools VDV500-123 Probe-Pro is a professional-series tone tracer, featuring an inductive probe with a

speaker for amplification, and an LED light for use in dark spaces. It also features a headphone jack for use in

extreme noise environments.

• Operating Altitude: 6562’ (2000 m) maximum

• Relative Humidity: 10% to 90%, non-condensing

• Operating Temp: 14° to 122°F (-10° to 50°C)

• Storage Temp: -4° to 140°F (-20° to 60°C)

• Dimensions: 1.75" x 8.88" x 1.13" (44 x 226 x 29 mm)

• Weight: 5.7 oz (161.6 g) including batteries

• Battery Type: 4 x 1.5V AAA Alkaline

• Battery Life: Active: 25 hours

Standby/Storage: 3 years

• Auto Power-Off: After 10 minutes of inactivity

Specifications subject to change.

Replaceable Inductive Polymer Tip (VDV999-068)

P10

Lanyard Slot

Worklight

P11

"-" (Negative) Terminal

Worklight On/Off Button

P12

"+" (Positive) Terminal

Signal Strength Indicator

P13

Terminal Release Buttons

Power On/Off Button

P14

Verification Indicator

Volume Increase Button

P15

Battery Cover

Volume Decrease Button

P16

Battery Cover Screw (No. 2 Phillips)

Battery Status Indicator

P17

3.5 mm Headphone Jack*

Speaker

P17

P11 P12

P10

* Excessive volume can cause permanent hearing damage. Use as low a volume as possible.CAUTION:

P14

FEATURE DETAILS

P13

P15

P16

Product specificaties

Merk:	Klein Tools
Categorie:	Meetapparatuur
Model:	VDV500-123
Ingebouwd display:	Nee
Breedte:	30 mm
Diepte:	36 mm
Hoogte:	227 mm
Ondersteund aantal accu's/batterijen:	4
Type product:	Tester voor kabels met getwiste aderparen
Type batterij:	AAA
Ondersteunde aansluitingen:	3,5 mm