Klein Tools BAT20-12T165 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Klein Tools BAT20-12T165 (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
INSTRUCTION MANUAL
Battery-Powered
12-Ton Cable Crimper
• 20V Lithium Ion
• 8 AWG to 750 MCM Aluminum
• 8 AWG to 750 MCM Copper
• U-Style Die Compatible
• 1.73" (44 mm) Jaw Opening
BAT20-12T165
SERIES
ENGLISH
FRANÇAIS pg. 25
ESPAÑOL pg. 13
2
GENERAL SPECIFICATIONS
Klein Tools BAT20-12T165 series crimpers are designed for professional cable crimping applications.
• Power Source: 20V Li-Ion battery
• Force: 12 Tons (24,000 lbs; 10,866 Kg)
• Operating Temperature: ° ° ° °14 F to 104 F (-10 C to 40 C)
Specifications subject to change.
1Advance trigger switch 6Battery pack
2Retract trigger switch 7Battery release button
3Trigger lock 8Fuel gauge button
4a Lower die release button 9Lift rings (x2)
4b Upper die release button 10 Crimp indicator LED
5a Lower die (not included) 11 Worklights (x4)
5b Upper die (not included) 12 Side warning label
NOTE: There are no user-serviceable parts inside crimper.
Please contact Klein Tools for an authorized service center.
FEATURE DETAILS
ENGLISH
9
1
10
3
2
6
8
7
11
12
4b 4a
5b 5a
3
DEFINITIONS
The definitions below describe the level of severity for each signal word used in this manual:
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
WARNINGS
• use under wet conditions or in presence of flammable liquids or gases.DO NOT
• This is a professional power tool. let children come into contact with the tool. Supervision is required DO NOT
when inexperienced operators use this tool.
• Never modify the power tool or any part of it. Damage or personal injury could result.
SAFETY
To ensure safe operation and service of the drill, follow these instructions. Failure to observe these warnings can
result in electric shock, re, severe injury or death.
1) Work Area Safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2) Electrical Safety
a) Avoid body contact with earthed or grounded objects. There is an increased risk of electric shock if your body is
earthed or grounded.
b) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
c) Do not abuse the battery charger cord. Never use the cord for carrying, pulling or unplugging. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
d) When operating the battery charger outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
e) If operating the battery charger in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI reduces the risk of electric shock.
3) Personal Safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the trigger lock is engaged before connecting to battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the switch invites accidents.
d) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in
unexpected situations.
e) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught in moving parts.


Product specificaties

Merk: Klein Tools
Categorie: Niet gecategoriseerd
Model: BAT20-12T165

Heb je hulp nodig?

Als je hulp nodig hebt met Klein Tools BAT20-12T165 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Klein Tools

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd