Kenwood KRF-V7300D Handleiding

Kenwood Receiver KRF-V7300D

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood KRF-V7300D (72 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/72

AUDIO-VIDEO CONTROL CENTER

KRF-V9300D

KRF-V8300D

KRF-V7300D

INSTRUCTION MANUAL

Declaration of Conformity with regard to

the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation

2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan

EU Representative's:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

2 KRF-V9300D/KRF-V8300D/KRF-V7300D

Before use

Safety precautions

¤ Caution : Read this page carefully to ensure safe

operation.

Units are designed for operation as follows.

Australia ......................................................................................AC 240 V only

Europe .........................................................................................AC 230 V only

WARNING :

TO PREVENT FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,

WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO

ALERT THE USER TO THE PRESENCE OF UNINSULATED

"DANGEROUS VOLTAGE" WITHIN THE PRODUCT’S

ENCLOSURE THAT MAY BE OF SUFFICIENT

MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC

SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL

TRIANGLE IS INTENDED TO ALERT THE USER TO

THE PRESENCE OF IMPORTANT OPERATING AND

MAINTENANCE (SERVICING) INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE APPLIANCE.

Information on Disposal of Old Electrical and

Electronic Equipment and Batteries (applicable

for EU countries that have adopted separate

waste collection systems)

Products and batteries with the symbol (crossed-

out wheeled bin) cannot be disposed as

household waste.

Old electrical and electronic equipment

and batteries should be recycled at a facility

capable of handling these items and their waste

byproducts.

Contact your local authority for details in locating

a recycle facility nearest to you.

Proper recycling and waste disposal will help

conserve resources whilst preventing detrimental

effects on our health and the environment.

Notice: The sign "Pb" below the symbol for

batteries indicates that this battery

contains lead.

Unpacking

Unpack the unit carefully and make sure that all the accessories

are present.

FM indoor antenna (1)

AM loop antenna (1)

Remote control unit (1)

– KRF-V9300D : RC-R0923

– KRF-V8300D : RC-R0831

– KRF-V7300D : RC-R0733

Batteries* (R03) (2)

KRF-V9300D/KRF-V8300D only

Setup microphone (Cord length : About 5m) (1)

If any accessories are missing, or if the unit is damaged or fails to

operate, notify your dealer immediately. If the unit was shipped

to you directly, notify your shipper immediately. Kenwood

recommends that you retain the original carton and packing

materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

* Batteries are attached to

the packing material.

English 3

Before use

12. Se rvicing – Do not attempt to service this product yourself

as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service

personnel.

13. Damage Requiring Service – Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the

operating instructions.

e) If the product has been dropped or damaged in any way,

and

f) When the product exhibits a distinct change in performance

– this indicates a need for service.

g) If an abnormal smell or smoke is detected.

14.

Replacement Parts – When replacement parts are required, be sure

the service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other

hazards.

15. Safety Check – Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

16. Wall or Ceiling Mounting – This product should be mounted to

a wall or ceiling only as recommended by the manufacturer.

17. Heat – This product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products that

produce heat. Do not place a flaming object, such as a candle or

lantern, or near the product.

18. Power Lines – An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or circuits.

When installing an outside antenna system, extreme care should

be taken to keep from touching such power lines or circuits as

contact with them might be fatal.

19. Outdoor Antenna Grounding – If an outside antenna or cable

system is connected to the product, be sure the antenna or cable

system is grounded so as to provide some protection against

voltage surges and built-up static charges. Article 810 of the

National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements for

the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ANTENNA

LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

GROUND CLAMPS

Notes:

1. Item 7 is not required except for grounded or polarized equipment.

2. Item 19 complies with UL in the U.S.A.

IMPORTANT SAFETY INSTRUCTIONS

Read Instructions – All the safety and operating instructions should

be read before the product is operated.

Retain Instructions – The safety and operating instructions should

be retained for future reference.

Heed Warnings – All warnings on the product and in the operating

instructions should be adhered to.

Follow Instructions – All operating and use instructions should be

followed.

1. Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

2. Attachments – Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

3. Water and Moisture – This product shall not be exposed to

dripping and splashing – for example, near a bath tub, wash

bowl, kitchen sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like. Do not place an object containing

liquid, such as a flower vase, on the appliance.

4. Accessories – Do not place this product on an

unstable cart, stand, tripod, bracket, or table. The

product may fall, causing serious injury to a child

or adult, and serious damage to the product. Use

only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer. Any mounting

of the product should follow the manufacturer’s instructions,

and should use a mounting accessory recommended by the

manufacturer. A product and cart combination should be moved

with care. Quick stops, excessive force, and uneven surfaces may

cause the product and cart combination to overturn.

5. Ventilation – Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and

to protect it from overheating, and these openings must not be

blocked or covered. The openings should never be blocked by

placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

6. Power Sources –

This product should be operated only from the

type of power source indicated on the product. If you are not sure of

the type of power supply to your home, consult your product dealer

or local power company.

7. CAUTION – Polarization –

This product may be equipped

with a polarized alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into the power outlet

only one way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug should

still fail to fit, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

8. Power Cord Protection – Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords

at plugs, convenience receptacles, and the point where they exit

from the product.

9. Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the product

due to lightning and power-line surges.

10. Overloading – Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of fire

or electric shock.

11. Object and Liquid Entry – Never push objects of any kind into

this product through openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the product.

¤ Caution : Read this page carefully to ensure safe operation.

Product specificaties

Merk:	Kenwood
Categorie:	Receiver
Model:	KRF-V7300D
Kleur van het product:	Zwart
Gewicht:	10900 g
Connectiviteitstechnologie:	Bedraad
Aantal HDMI-poorten:	3
Componentingang video (YPbPr/YCbCr):	3
S-Video ingang:	1
Gemiddeld vermogen:	910 W
Stroomverbruik (in standby):	0.4 W
Hoofdtelefoonuitgangen:	1
HDMI:	Ja
Audio-uitgangskanalen:	6.1 kanalen
D/A-converter:	24-bit/96kHz
S-Video uitgang:	1
Afmetingen (B x D x H):	440 x 394 x 159 mm
Inclusief RDS tuner:	Ja
Digitale audio optische in:	2
FM-band:	87.5 - 108 MHz
Afstandsbediening inbegrepen:	Ja
Digitale audio-ingang (coax):	1
Stroomverbruik (typisch):	255 W
AM band bereik:	530 - 1610 kHz