Joovy Toy Car Seat 002 Handleiding

Joovy Babyproducten Toy Car Seat 002

Lees hieronder de 📖 handleiding in het Nederlandse voor Joovy Toy Car Seat 002 (12 pagina's) in de categorie Babyproducten. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
USA: Joovy • 2919 Canton Street • Dallas, TX 75226 • Tel: (877) 456-5049 • Fax: (214) 761-1774 • Email: customerservice@joovy.com • Website: www.joovy.com
CANADA: Elfe Juvenile Products • 4500 Thimens Blvd • Saint-Laurent, QC, H4R 2P2 • Tel: (800) 667-8184 • Email: service@elfe.ca
Toy Car Seat
002/003
© Joovy 2017 • 170926
EN FR ES
!WARNING
Please read these instructions carefully before use and keep them for future reference.
• This product is a TOY car seat and carrier for dolls or stuffed toys ONLY.
• NEVER use this toy to carry a baby or child for any purpose whatsoever.
• NEVER use this toy to hold a baby or child in a vehicle. Death or Serious Injury may occur.
• NEVER leave the car seat unsecured in a vehicle. An unsecured car seat can be thrown around and may injure
you or your child in a sharp turn, sudden stop or accident.
• Discard this product if it is ever involved in an actual vehicle accident.
• The maximum weight that can be carried in the toy car seat is 4 lbs.
• Discard all packaging materials properly. Do not allow children to play with them.
Although this is a TOY and must NEVER be used for a baby or child, other warnings are provided throughout this
manual to promote your child’s safe use of this product for their doll or stuffed toy. For your child’s understanding of
the safe use of this product, please read and adhere to these warnings and insure that your child also understands
and follows them.
Please do not return this product to the store
If you experience any difculty with the assembly or use of this product, or if you have a question regarding these
instructions, please contact our Customer Service Department:
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
CANADA – Elfe Juvenile Products: (800) 667-8184, Hours 8:30 am – 5:00 pm Eastern Time.
Please note: Styles and colors may vary.
Assembling and Using your Doll/Stuffed Toy Car Seat
To insure safe operation of your doll/stuffed toy car seat, please follow these instructions carefully.
1 Unpacking the Product
• Carefully remove car seat from the box and plastic bag.
• Discard all packaging materials properly. Do not allow children to play with them.
2 Carrier Removal From and Attachment to the Base
• To remove the doll carrier from the base, reach under the foot end of the base and press the release button on the carrier while lifting the
carrier from the base. See Figure 2.1.
• To place the doll carrier in the base, line up the carrier with the base and push it down onto the base until an audible click is heard. See
Figure 2.2.
• Pull up on the doll carrier to be sure it is latched securely to the base.
3 Adjusting the Handle
The handle can be positioned in two modes: Up as a carrier/rocker and down as a sitter/feeder.
• To adjust the handle, pull outward on the round sections of the handle on BOTH sides of the carrier. Continue to hold these two sections
outward while starting to rotate the handle in the desired direction. See Figure 3.1.
• Once the handle begins to rotate, release these sections, allowing them to lock back into their new positions with an audible click. Attempt
to move the handle forward or backward to insure it is securely latched.
4 Positioning the Shoulder Straps
• Remove the carrier from the base and rotate the handle down to the sitting position.
• Place doll into the carrier.
• Determinewhichpairofshoulderharnessslotsisevenwithorjustbelowthedoll’sshoulders.DONOTuseupperharnessslotsiftheyare
abovethedoll’sshoulders.Theywillnotholdthedollsecurelyinasuddenstoporcrash.
• If the shoulder straps need to be adjusted, remove doll from carrier.
• From the back of the carrier, unthread harness straps from the sliding buckle. REMEMBER THE CORRECT ROUTING OF THE STRAPS.
• Remove the straps from the slots in the seat and re-route them through the desired slots, making sure they are not twisted.
• Rethread the straps through the buckle.
• Check that straps are secure by pulling on harness straps from the front.
5 Securing Doll in Carrier
• With the handle in the sitting position, unbuckle the harness by pressing the button in the center of the buckle. See Figure 5.1.
• Open the harness clip by pressing the button and unbuckling the clip. See Figure 5.2.
• Placethedollinthecarrierwiththeshoulderstrapsoveritsshouldersandchest.Thenplacethecrotchstrapbetweenthedoll’slegs.
EN FR ES
• Bringtheseatbeltaroundthedoll’swaistandinsertthemaleendofeachwaiststrapbuckleintothefemalebuckle.Insurethattheysnap
into place. See Figure 5.3.Tightenthewaistbelttobesnugaroundthedoll’swaist.
• Buckle the harness clip pieces together. See Figure 5.4.PositiontheharnessclipIthemiddleofthedollorstuffedtoy’schest,levelwith
the armpits and away from the neck.
• Both the shoulder straps and the waist straps may be adjusted using the sliding buckle on these straps, located under the bottom of the
carrier. See Figure 5.5.
6 Using your Doll Car Seat in the Carrier Mode
• To use the product in carrier mode, position the handle in the UP position as described previously.
• The carrier may then be transported by holding on to the center of the handle and carrying it wherever your child goes.
!WARNING
NEVER use this toy to carry a baby or child for any purpose whatsoever.
DO NOT use as a carrier for any dolls or stuffed toys that weigh more than 4 lbs.
As with a real carrier, this toy carrier should never be placed near the edges of counter tops, tables, or other
elevated surfaces.
Using your Doll Car Seat in the Vehicle
7 Vehicle Seat Requirements
• The doll car seat should be placed in the center position of the seat directly behind the front seat whenever possible.
• Because a real car seat would not be placed in a vehicle location that has a front airbag, do not place this doll car seat in a similar
location.
• The vehicle seat should always be a forward facing seat and the seat should lock in an upright position.
8 Installing the Doll Carrier and Base Using Vehicle Belts
To install the toy car seat in a vehicle, you must carefully follow the instructions provided by your vehicle manufacturer in addition to the
information in this manual. Before proceeding, be sure you have read and understand all of the instructions in this section.
• Remove doll carrier from base. Place the base in a rear-facing position in the vehicle seat.
• Thread the vehicle seat belt inside and through the curved plastic piece under the base. See Figure 8.1.
• Buckle the vehicle seat belt, making sure the buckle tongue goes into the correct buckle. The vehicle belt should not be twisted. See
Figure 8.2.
• Secure the base tightly into position by pushing down on the middle of the base with one knee or free hand while tightening the vehicle
belt.Refertoyourvehicleowner’smanualforinstructionstoproperlytightenthevehiclebelt.
• Place the doll carrier in the base and make sure it “Clicks.” Pull up on the doll carrier to be sure it is latched securely in the base.
!WARNING
NEVER use this toy to hold a baby or child in a vehicle. Death or serious injury may occur.
DO NOT use as a car seat for any dolls or stuffed toys that weigh more than 4 lbs.
NEVER leave the car seat unsecured in a vehicle. An unsecured car seat can be thrown around and may injure you
or your child in a sharp turn, sudden stop, or crash.
DO NOT use this product if the carrier does not securely latch into the base. Contact Joovy Customer Service for
assistance.
9 Acceptable Vehicle Belt Systems
Thefollowingbeltsystemsareacceptableforusewithyourcarseat.Youshouldrefertoyourvehicleowner’smanualtodeterminewhich
type of seat belts your vehicle has.
• Lap Belts-Manually Adjusted: When buckled, the belt is tightened manually by pulling on the excess belt while pushing down hard on the
car seat base.
• Lap Belts with Automatic Locking Retractor (ALR): The automatic locking retractor will not allow the lap belt to lengthen once it is buckled.
Tighten the belt by feeding the belt back into the retractor while pushing down hard on the car seat base.
• Combination Lap/Shoulder Belt with Locking Latch Plate: Once it is buckled, this type of belt has a latch plate that will not allow the lap
portion of the belt to loosen. Belt is tightened by pulling hard on the shoulder portion of the vehicle belt while pushing down hard on the car
seat base.
• Combination Lap/Shoulder Belt with Sliding Latch Plate: This type of belt has a latch plate that slides freely along the belt. To prevent
movement of the lap portion of this type belt, the belt MUST be converted through the use of a Locking Clip, unless your vehicle belt can
beconvertedinanotherwayasdescribedinyourvehicleowner’smanual.
10 To install the locking Clip
• Tighten the buckled belt by pushing down hard on the doll carrier and base and pulling hard on the shoulder belt.
• While pushing down on the doll carrier and base, pinch the two straps together behind the buckle tongue. Unbuckle the belt without
allowing it to slip.


Product specificaties

Merk: Joovy
Categorie: Babyproducten
Model: Toy Car Seat 002

Heb je hulp nodig?

Als je hulp nodig hebt met Joovy Toy Car Seat 002 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Babyproducten Joovy

Handleiding Babyproducten

Nieuwste handleidingen voor Babyproducten