Joovy Toy Caboose Handleiding

Joovy Babyproducten Toy Caboose

Lees hieronder de 📖 handleiding in het Nederlandse voor Joovy Toy Caboose (12 pagina's) in de categorie Babyproducten. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
USA: Joovy • 2919 Canton Street • Dallas, TX 75226 • Tel: (877) 456-5049 • Fax: (214) 761-1774 • Email: customerservice@joovy.com • Website: www.joovy.com
CANADA: ISSI Inc. • 4500 Thimens Blvd, Suite 100 • St-Laurent, QC, H4R 2P2 • Tel: (800) 667-4111 • Montreal: (514) 344-3045 • Email: service@issibaby.ca
Toy Cabooseâ„¢
04X
© Joovy 2017 • 170109
EN FR ES
!WARNING
Please read these instructions carefully before use and keep them for future reference.
• This product is a TOY stroller for dolls or stuffed toys ONLY.
• NEVER use this toy to carry a baby or child for any purpose whatsoever. Death or Serious Injury may occur.
• Maximum weight allowed = 5 lbs. (2.28 kg) in EACH seat.
• DO NOT stand on platform. Riding is for dolls or stuffed toys ONLY.
• This product contains small parts. Adult assembly is required.
• The maximum weight that can be carried in the storage basket is 5 lbs. (2.28 kg).
• Discard all packaging materials properly. Do not allow children to play with them.
• Discontinue use of this toy should it malfunction or become damaged.
• Please contact our customer service department to arrange for repair or obtain replacement parts.
• Do not use this toy on stairways or escalators.
• Hanging bags or other toys from the handlebars or any other parts of this toy may change its balance and cause a
hazardous unstable condition.
• When installing a toy infant carrier onto the stroller, ALWAYS use the restraining strap to secure the carrier in place.
Please do not return this product to the store
If you experience any difculty with the assembly or use of this product, or if you have a question regarding these
instructions, please contact our Customer Service Department:
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
CANADA – ISSI Inc.: (800) 667-4111, Hours 8:30 am – 5:00 pm Eastern Time.
Please note: Styles and colors may vary.
1 Unpacking the Product
• Remove everything from the box and identify the parts using Figure 1.1. (not to scale)
A: stroller, B: canopy, C: tray, D: car seat carrier support, E: front wheels (2), F: rear wheels (2), G: rear axle, H: hubcaps (2),
I: washers (2), J: axle locks (2), K: axle caps (2), and documents (not shown)
• Discard all packaging materials properly including plastic coverings.
• DO NOT allow children to play with any packaging materials.
!WARNING
Adult assembly required. No tools required. Package contains small parts.
Keep small parts out of children’s reach during assembly.
2 Unfolding the Stroller
• Orient the stroller with the handle bar away from you.
• Release the locking latch located on the lower right side by lifting up the lever. See Figure 2.1.
• Lift up on the stroller handle with both hands until the stroller is in the open position and both side frame bars snap into place in their
holders.
3 Installing the Rear Wheels
• Turn your stroller upside down so that it is resting on the seatback.
• Locate the rear axle and slide it through the holes into the frame near the platform.
• Locate a metal washer and slide the washer onto one end of the axle. See Figure 3.1.
• Locate a rear wheel and slide the wheel onto the axle.
IMPORTANT NOTE: The left and right side wheels are slightly different. The correct wheel will have the arrow shapes on the tire tread
pointed towards the REAR of the stroller. BE CERTAIN that the wheels are placed on the correct side of the axle, because this is intended
to be a one-time assembly.
• Locate an axle lock. While holding the axle from the opposite side, orient the axle lock with the larger side closest to the wheel and snap it
onto the axle. See Figure 3.2.
• Fit a rear axle cap over the attachment. You will hear this piece snap into place. See Figure 3.3.
• While holding the wheel, line up the four prongs on the hubcap with the holes in the spoke of the wheel and snap into place. BE CERTAIN
that all four prongs snap into place. Pull on the hubcap to be sure it is installed securely.
• Repeat these steps on the other side.
• Ensure that each wheel assembly is secure before using this toy. Pull on the wheels to be sure they are installed correctly.
EN FR ES
4 Installing/Removing the Front Wheels
• Tilt the stroller backward, on a clean surface, so that it rests on the handlebar and the rear wheels.
• Take one of the front wheels and insert the post into the front wheel housing until an audible click is heard. See Figure 4.1.
• Pull outward on the wheel to ensure the wheel is installed properly.
• Repeat this procedure for the other wheel.
5 Installing and Operating the Canopy
• To attach the canopy, orient the canopy on the stroller with the wide front edge toward the front of the stroller.
• Line up the ttings on the canopy with the ttings near the center of the stroller and slide the canopy on until it snaps into place.
See Figure 5.1.
• The canopy will open, close and ratchet forward or backward.
• To remove the canopy, slide the canopy off the ttings.
6 Attaching/Detaching the Front Tray
• To attach the front tray, line up the tray with the tubing on the front of the stroller and push inward until the tray snaps into place.
See Figure 6.1. Pull outward on the tray sides to be sure both are snapped securely in place.
• To remove the front tray, press the button on the bottom of each of the tray ttings while pulling outward on the tray. See Figure 6.2.
7 Adjusting the Footrest
The footrest can be adjusted to two positions, horizontal or all the way down.
• To place the footrest into the horizontal position, pull up on the footrest and the metal bar until the footrest catches into position. See
Figure 7.1.
• To place the footrest all the way to its down position, pull up on the footrest to release the bar from the slot, and then slowly lower the
footrest.
8 Securing the Front (Seated) Doll
• Unlatch the harness buckle by pressing down on button in the center of the buckle and removing the male sides.
• Place the doll in the stroller seat with the shoulder straps over their shoulders and chest and the crotch strap between the doll’s legs.
• Bring the seat belt around the doll’s waist and snap the buckle together. See Figure 8.1. Tighten the seat belt to be snug around the doll’s
waist.
• Both the shoulder straps and the waist/crotch straps may be adjusted using the sliding buckles on these straps.
!WARNING
This product is a TOY stroller for dolls or stuffed toys ONLY.
NEVER use this toy to carry a baby or child for any purpose whatsoever. Death or Serious Injury may occur.
Maximum weight allowed = 5 lbs. (2.28 kg) in EACH seat.
9 Seatback Positioning
The front seat has two positions.
• To place the seat in the upright position, push the bar on the rear of the seat toward the front of the stroller and rotate the seatback
towards the front of the stroller until this bar is locked in its lowest position. See Figure 9.1.
• To recline the seat, pull the bar on the rear of the seat toward the rear of the stroller and rotate the seatback down until this bar is again in
its lowest position.
10 Securing a Rear Standing Doll
• Push the bench seat to its most forward position.
• Position the doll on the platform on the back of the stroller facing forward with both of their hands on the handles. See Figure 10.1.
• Position the safety belt around the doll’s waist and under the armpit and secure it tightly.
!WARNING
Children should NEVER stand on the platform.
Riding is for dolls ONLY.
11 Using the Bench Seat
• Push the bench seat to its most rearward position.
• Position the doll on the bench seat facing backward with their feet on the platform.
• Unlatch the seat belt buckle by pressing down the button in the center of the buckle and removing the male sides of the buckle.
• Place the seat belt completely around the doll’s waist, place the crotch strap between the doll’s legs and snap the buckle together. See
Figure 11.1.
• Adjust the seat belt to be snug around the doll’s waist by using the adjustment strap near the buckle.


Product specificaties

Merk: Joovy
Categorie: Babyproducten
Model: Toy Caboose

Heb je hulp nodig?

Als je hulp nodig hebt met Joovy Toy Caboose stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Babyproducten Joovy

Handleiding Babyproducten

Nieuwste handleidingen voor Babyproducten