JL Audio Stealthbox SB-T-TACACCAB/10W3v3/TN Handleiding

JL Audio Niet gecategoriseerd Stealthbox SB-T-TACACCAB/10W3v3/TN

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio Stealthbox SB-T-TACACCAB/10W3v3/TN (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

I N S T A L L A T I O N G U I D E

for the

SB-T-TACCAB/10W3v3

SKU# 94307 - 94308

2005 - 2015 Toyota Tacoma Access Cab

Thank you for choosing a JL Audio Stealthbox ® for your automotive sound system. With proper installation, your new

vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox ® installed by your authorized JL Audio dealer. The

installation professionals employed by your dealer have the necessary tools and experience to disassemble and

reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is

installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox ® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Remove the cup holders from the console.

Remove the pair of screws that are exposed.

Continued on Next Page

S T E P 2

Remove the pair of screws that are at the bottom of the

storage bucket.

Remove the console out of the truck.

S T E P 3

Remove the three bolts located on the transmission tunnel

that secures the mounting bracket for the AC power inverter.

(If equipped with the AC power inverter)

Unplug the wiring harness from the AC power inverter and

remove out of truck.

If the AC power is to kept, this is up to the installer for proper

relocation, JL Audio® is not responsible.

SB-T-TACCAB/10W3v3_INSTR_SKU#011230

INSTALLATION

D I F F I C U L T Y :

OUT

ESTIMATED TIME:

12 H OUR

Continued on Next Page

SB-T-TACCAB/10W3v3_INSTR_SKU#011230

S T E P 7

Measure and mark 1-inch from the rear panel’s edge to the

middle of the rear panel. The mark is on both sides and the

top.

Cut on the marked line and remove the center section.

S T E P 6

Run speaker wire form the amplifier’s location to the

Stealthbox®. Wire to the terminal and check the woofer for

proper operation.

Place the Stealthbox® into the mounting location.

Using the three factory bolts that where removed in

STEP 3, secure the bottom of each mounting bracket to the

transmission tunnel.

Tighten all six mounting bolt assemblies.

S T E P 5

Place a supplied lock washer, flat washer and mounting

bracket onto three of the supplied bolts.

The two shorter length brackets mount close to the woofer.

Make sure that all three mounting brackets tapper out from

the enclosure, not tapper in.

Only hand tighten the mounting assembly at this time.

S T E P 4

Cut off this portion of the bracket as close to the

transmission tunnel as possible.

Page 2 • JL Audio, Inc 2016

S T E P 9

*IMPORTANT*

This picture is looking inside the center console with the lid

open. The front of the console it to the left.

Measure and mark 2 inches from the top of the center

console down. Follow the lines in the picture.

S T E P 1 1

*IMPORTANT*

This picture is looking inside the center console with the lid

open. The picture is facing the front of the console.

Cut on the complete marked line. Do not cut into the outer

walls, these are not double layered. Only cut into the floor

and into the stand outs for the legs of the lid.

S T E P 1 0

*IMPORTANT*

This picture is looking inside the center console with the lid

open. The picture is facing the rear of the console.

Measure and mark 2 1/2 inches from the top of the center

console down. Follow the lines in the picture.

S T E P 8

Measure and mark 2 inches from the top of the

cup holders down. The mark goes all the way around the

cup holder section.

Cut on the marked line and remove the bottom of the

cup holders.

SB-T-TACCAB/10W3v3_INSTR_SKU#011230

C O N G R A T U L A T I O N S

You have completed the installation for this model!

Please refer to the Power Recommendation section for an

amplifier recommendation and basic set-up help.

S T E P 1 4

Place the screws and cup holders that were removed

in STEP 1.

S T E P 1 3

Place the supplied L-bracket onto the Stealthbox®, as in the

picture.

With a 7/64-inch drill bit and drill, drill pilot holes into the

Stealthbox® only. With the supplied screws, mount the

L-bracket to the Stealthbox® and to the center console.

Place the supplied black carpet panels into the storage

bucket and the rear cup holder areas.

S T E P 1 2

Place the center console on top of the Stealthbox.

This rear portion of the console has ears that stick out the

front on the side walls. These ears need to be placed into the

inside of the walls of the front position of the console.

Page 3 • JL Audio, Inc 2016

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

w w w . j l a u d i o . co m

1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A

I N C L U D E D H A R D W A R E

(3) 1/4-inch -20 x 1-1/2-inch Hex Bolts (2) Custom Short Mounting Bracket

(3) 1/4-inch x 3/4-inch USS Flat Washer (1) Aluminum L-Bracket

(3) 1/4-inch x 1 1/4-inch Lock Washer Flat Head Machine Screws (3)

(1) Custom Long Mounting Bracket

S P E C I F I C A T I O N S

Enclosure Type: Acoustic Suspension (sealed)

Driver Type: 10W3v3-2

Nominal Impedance: 2 ohms

Continuous Power Handling: 500 Watts

P O W E R R E C O M M E N D A T I O N

JL Audio recommends using a high quality amplifier such as the JL Audio XD300/1v2. The diagram below shows

the recommended crossover settings for the XD300/1v2 when being used to power your Stealthbox ®.

The JL Audio XD300/1v2 is a very versatile audio component. Please consult the owner’s manual for even more

detailed information about installing and tuning this amplifier.

M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6-inch x 9-inch Separates / Front Doors

Fits JL Audio Models*: TR690-TXi, & C2-690tx

Rear Speaker Size / Location: 6.5-inch / Rear Doors

Fits JL Audio Models*: TR650-CXi, TR650CSi, C2-650x, C2-650,

C3-650, C5-525x, C5-525 & ZR525-CSi

* All speakers require custom adaptors for installation

Product specificaties

Merk:	JL Audio
Categorie:	Niet gecategoriseerd
Model:	Stealthbox SB-T-TACACCAB/10W3v3/TN

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio Stealthbox SB-T-TACACCAB/10W3v3/TN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd JL Audio

JL Audio Stealthbox SB-F-ESCP/10W1v3 Handleiding

15 November 2024

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-2 Handleiding

15 November 2024

JL Audio MediaMaster 55-HR Handleiding

7 Augustus 2024

JL Audio MediaMaster 55 Handleiding

7 Augustus 2024

JL Audio MBT-RXv2 Handleiding

9 Juli 2024

JL Audio MBT-CRXv3 Handleiding

9 Juli 2024

JL Audio Stealthbox SBX-F-MAVG1/10TW1 Handleiding

10 Juni 2024

JL Audio Stealthbox SBX-T-TACDCG3/10TW3 Handleiding

10 Juni 2024

JL Audio MediaMaster MM105-HR Handleiding

11 Maart 2024

JL Audio JLINK RX Handleiding

8 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Kolcraft MLB Chicago Cubs Handleiding

26 November 2024

Kolcraft MLB New York Yankees Handleiding

26 November 2024

Kolcraft MLB San Francisco Giants Handleiding

26 November 2024

Kolcraft MLB St. Louis Cardinals Handleiding

26 November 2024

Nedis POCO106 Handleiding

26 November 2024

Nedis BTSM1GY Handleiding

26 November 2024

Turbosound TPOLEAJ-01 Handleiding

26 November 2024

Turbosound TSTAND-01 Handleiding

26 November 2024

IFM TAD981 Handleiding

26 November 2024

IFM TAD961 Handleiding

26 November 2024