JL Audio Stealthbox SB-KW-TRX4/10TW3 Handleiding

JL Audio Niet gecategoriseerd Stealthbox SB-KW-TRX4/10TW3

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio Stealthbox SB-KW-TRX4/10TW3 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

SB-KW-TRX4/10TW3 INSTR_SKU# 011451

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

I N S T A L L A T I O N G U I D E

for the

SB-KW-TRX4/10TW3

SKU# 94624

2015 & Up Kawasaki Teryx 4

Continued on Next Page

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox® be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULT Y:

EST IMAT ED TIME:

1 H OU R

OUT

I N C LU D E D H AR D WAR E

Continued on Next Page

Page 2 • JL Audio, Inc., 2016

SB-KW-TRX4/10TW3 INSTR_SKU# 011451

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.

BOM ID Qty SKU Description

1 1 153693 Bracket

2 2 153737 3/8” Stainless Steel Flat Washer

3 2 153731 3/8” Stainless Steel Serrated Spring Lock Washer

4 2 153730 3/8 - 16 x 1-1/4” Stainless Steel Serrated Flange Bolt

- 2 151345 Wax Squares (not shown)

- 2 150249 Foam Strips (not shown)

P O W E R R E C OM M E N D AT I O N

JL Audio recommends high quality ampliers such as the JL Audio MX300/1. The diagram below shows the recommended crossover settings for the MX300/1. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

C O N N E C T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using an 8 AWG power kit such as the XD-PCS8-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for