JL Audio Stealthbox SB-H-S2000/10W3v3 Handleiding

JL Audio Niet gecategoriseerd Stealthbox SB-H-S2000/10W3v3

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio Stealthbox SB-H-S2000/10W3v3 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Sheet SKU#011155 Revision 10/5/01
Installation Guide:
This Stealthbox is a product which requires professional installation skills and tools. Please read this
installation guide thoroughly before beginning the project. It will guide you step by step through the
installation. Several of the steps in this process may require two people to accomplish.
It is absolutely vital that the enclosure be properly mounted to the vehicle according to these instruc-
tions. Failure to mount the enclosure properly presents two problems: 1) The sub-bass performance
will suer due to the movement of the enclosure caused by the force exerted by the woofer and 2) A
loose enclosure presents a serious safety hazard in the event
of a collision or sudden deceleration.
STEP 1: Using a panel tool, remove trunk carpeting.
STEP 2: When all carpet is removed there are two plugs
that are visable. Remove these plugs by cutting the glue.
STEP 3: At this time run your speaker wire. Reinstall trunk
carpeting.
STEP 4: With carpet reinstalled poke an awl though the
carpet from the underside of car.
SB-H-S2000/10W3, JL AUDIO, Inc 2001 • Page 1
SB-H-S2000/10W3 STEALTHBOX™
Honda S2000
Sheet SKU#011155 Revision 10/5/01
SB-H-S2000/10W3, JL AUDIO, Inc 2001 • Page 2
STEP 5: Locate holes from inside the trunk. Using a carpet
knife, cut holes into the carpet.
STEP 6: Connect the speaker wire and place the Stealthbox in
the well, making sure that no speaker wire is trapped under the
enclosure. Test the enclosure at this point.
STEP 7: From underneath the car, insert two 3/8" bolt, lock
washer, fender washer through the hole in the sheet metal into
the threaded insert molded into the Stealthbox. Before tighting
place a generous bead of silicone sealant between the fender
washer and the sheet metal of the car, to prevent moisture from
entering trunk.
3/8" Bolt
Lock Washer
Flat Washer Vehicle's Sheet M
e
Enclosure Wall (berglass) Threaded Insert
Molded into
Enclosure
Bead of Silicone Sealant
Sheet SKU#011155 Revision 10/5/01
10369 N. Commerce Pkwy, Miramar, Florida 33025-3921 Voice: (954) 443-1100 Fax: (954) 443-1111
SB-H-S2000/10W3, JL AUDIO, Inc 2001 • Page 3
Specifications:
• Driver: 10W3-D6
• Enclosure type: Sealed
• Power handling: 250 Watts Continuous
• Final Impedance: 3
STEP 8 : Place the new cargo well cover/grille into the vehicle.
This completes the installation.
Parts list:
One Stealthbox loaded with one JL Audio 10W3-D6 subwoofer.
One custom grille to replace factory well cover.
Two 1 1/4"long 3/8" bolts
Two 3/8" fender washers
Two 3/8" lock washers


Product specificaties

Merk: JL Audio
Categorie: Niet gecategoriseerd
Model: Stealthbox SB-H-S2000/10W3v3

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio Stealthbox SB-H-S2000/10W3v3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd JL Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd