JL Audio Stealthbox SB-F-RNGSCG4/10TW1 Handleiding

JL Audio Niet gecategoriseerd Stealthbox SB-F-RNGSCG4/10TW1

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio Stealthbox SB-F-RNGSCG4/10TW1 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

I N S T A L L A T I O N G U I D E

for the

SB-F-RNGSCG4/10TW1

SKU# 94684

2019 & Up Ford Ranger SuperCrew

• Installation requires appropriate tools and safety equipment.

Professional installation is recommended.

• If you prefer to perform your own installation, please read this

installation guide completely before beginning.

• Before cutting or drilling, check for potential obstacles behind

mounting surfaces.

• Mount this product securely to prevent damage or injury in

severe conditions.

INSTALLATION

DIFFICULT Y:

EST IMATED TIME:

1 HOUR

Enclosure Type: Sealed

Driver Type: 10TW1-2

Nominal Impedance: 2 ohms

Continuous Power Handling: 300 watts (RMS method)

Continued on Next Page

OUT

SB-F-RNGSCG4/10TW1 INSTR_SKU# 011554

IN CL U DE D HAR DWA R E

Continued on Next Page

Page 2 • JL Audio, Inc., 2022

SB-F-RNGSCG4/10TW1 INSTR_SKU# 011554

BOM ID DescriptionQty SKU

1 1 153640 3/8 - 16 x 2-1/2” Set Screw

2 1 151096 3/8” Flat Washer

3 1 151081 3/8” Split Lock Washer

4 1 150196 3/8 - 16 Hex Nut

5 1 151345 Wax Square (not shown)

P O W E R R E CO M M E N D A T I O N

JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

Rem. |

Oset | Signal

Input Voltage

Low | High

Turn-On Mode

Monoblock Subwoofer Amplifier

C O N N EC T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for