Jensen JTA-220 Handleiding

Jensen Platenspeler JTA-220

Lees hieronder de 📖 handleiding in het Nederlandse voor Jensen JTA-220 (6 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

JTA-220

AM / FM STEREO TURNTABLE

INSTRUCTION MANUAL

Please read and follow this instruction manual carefully

before using the unit and retain it for future reference

audio

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE

OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions

5. Do not use this apparatus near water

6. Cleaning-Unplug this product from the wall outlet before cleaning, Do not use liquid cleaners or aerosol

cleaners. Use a dry cloth for cleaning

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not place this product on an unstable cart, stand, tripod, bracket, or table .The product

may fall, causing serious injury to a child or adult, and serious damage to the product.

Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer,

or sold with the product. Any mounting of the product should follow the manufacturer’s

instructions, and should use a mounting accessory recommended by the manufacturer.

A Product and Cart Combination Should Be Moved with Care-Quick stops, excessive

force and uneven surfaces may cause the product and cart combination to overturn.

9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(Including amplifiers) that produce heat.

10.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized or grounding-

type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade or the third prong is provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete

outlet.

11. Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles,

and the point where they exit from the apparatus.

12. Only use attachments/accessories specified by the manufacturer.

13. Unplug this apparatus during lightening storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids

such as vases shall be placed on the apparatus.

16. Do not overload wall outlet. Use only power source as indicated.

17. Use replacement part as specified by the manufacturer.

18. The product may be mounted to a wall only if recommended by the manufacturer.

19. Upon completion of any service or repairs to this product, ask the service technician to perform safety

checks.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

AND INSERT FULLY.

ATTENTION:

This unit is designed to operate only on normal 120V 60Hz AC house current. Operating this unit from any other power

source may cause damage to unit and such damage is not covered by your warranty.

This unit has a polarized AC plug with one wide blade and one narrow blade.

This plug will only fit into a matching polarized AC outlet. This is a safety feature to reduce the possibility of electric shock. If

this plug will not fit in your AC outlet, you probably have an out dated non-polarized outlet. You should have your

outdated outlet changed by a qualified licensed electrician. Do not file the wide blade on the plug, or use an adapter to

make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock.

POWER SOURCE

IMPORTANT NOTES

Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliance such as electric

heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places

subject to constant vibration and / or humid or moist areas.

Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a clean dry cloth.

Operate controls and switches as described in the manual.

Before turning on the power, make certain that the power cord is properly installed.

When moving the set, be sure to first disconnect the AC power cord.

LOCATION OF CONTROLS

1) VOLUME CONTROL

2) HEADPHONE JACK

3) POWER BUTTON

4) POWER INDICATOR

5) FUNCTION SELECTOR

6) FM STEREO INDICATOR

7) TUNING KNOB

8) FM ANTENNA

9) EXTERNAL SPEAKER TERMINALS

10) AC POWER CORD

11) INTERNAL SPEAKER SHUT-OFF SWITCH

12) TONE ARM

13) TONE ARM REST

14) SPEED SELECTOR

15) 45 RPM ADAPTOR

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures :

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC INFORMATION

WARNING

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

POWER CONNECTION

Only connect the power cord to a 120VAC/60Hz household plug.

SPEAKER TERMINAL

Connect EXTERNAL SPEAKERS (NOT INCLUDED) to the SPEAKER TERMINALS(9) located on the rear of the

unit (RED WIRE TO RED TERMINAL,BLACK WIRE TO BLACK TERMINAL).

This unit should not be connected to speakers with an impedance of less than 8 ohms, otherwise damage may

result to the unit.

REMARK: Make sure that the INTERNAL SPEAKER Switch (11) is in “ON” position if external speakers are not

connected.

HEADPHONE JACK (PHONES)

This unit will accept stereo headphones (not included) with a 1/8” plug and an impedance of 32 ohms or greater.

The speakers are automatically disconnected when headphones are connected to the PHONES jack.

CONNECTIONS

2 3

POWER (3) BUTTON – Press to turn unit on or off. The Power Indicator (4) will light when the unit is on.

VOLUME (1) CONTROL –Adjusts or headphones.the volume level of the speakers

FUNCTION (5) SELECTOR – Use to select the desired signal source (AM/FM/FM.ST or PHONO) to be listened to.

GENERAL

Product specificaties

Merk:	Jensen
Categorie:	Platenspeler
Model:	JTA-220
Ingebouwd display:	Nee
Breedte:	317.5 mm
Diepte:	270 mm
Hoogte:	159 mm
Gewicht verpakking:	3357 g
Materiaal behuizing:	Hout
AC-adapterfrequentie:	60 Hz
AC-adapter ingangsspanning:	120 V
Hoofdtelefoonuitgangen:	1
Soort voeding:	AC
Ondersteunde frequentiebanden:	AM, FM
Nominale snelheid:	33, 45, 78 RPM
Productafmetingen (B x H x D):	317.5 x 159 x 270 mm