Jablotron BP-12 Handleiding

Jablotron Beveiliging BP-12

Lees hieronder de 📖 handleiding in het Nederlandse voor Jablotron BP-12 (1 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Back-up Power Supply BP-12 2/2 (A5) MBC511 04 Back-up Power Supply BP-12 2/2 (A5) MBC511 04

Back-Up Power Supply BP-12

BP-12 set should be used everywhere where 12V DC back-up power supply is required.

Specification

input power supply adapter DE-20-15 (230 V AC / 15 V AC)

600 mA, 1.6 A fuse

back up battery 12V / 1.3 Ah - model Jablotron SA-214/1.3

output voltage 10,5 - 13.5 V DC, 1.6 A fuse

output current 400 mA permanent, (short time max. up to 1 A )

operating temperature -10 °C to +40 °C

complies with the essential requirements of: 89/336/EC EMC Directive - Protection concerning electro-

magnetic compatibility when is used for its intended purpose.

Original of the conformity assessment can be found at the web page www.jablotron.cz, section Technical support.

Contents

Plastic case with rubber sealing (125x85x55 mm), power supply PCB, adapter DE-20-15, battery

SA-214/1.3, dowels and screws.

Installation

Unscrew the plastic box cover andtake out the

battery. Install the plastic box on desired place

using enclosed dowels and screws. Put the in-

put and output wires through the holes in the

box. Fix the PCB with electronics to connectors

of the battery. Connect input and output wires to

the terminals and place the set inside the plastic

box. Put the sealing in the cover and close the box. Fix it with screws.

Important

Handle the back-up battery with caution! The battery can cause serious damages or injury when

being short circuited!

Operation

When 15 V AC input voltage is present, the battery is being charged and the green LED is lit. If

the input voltage is not present, the green LED is off and output voltage is supplied by the battery.

Presence of the output voltage 12 V DC is indicated by yellow LED.

Troubleshooting

Yellow LED is off

1/ The battery may be discharged (due to long absence of input power)

2/ Check the built-in fuses.

Note: Dispose of batteries safely depending on the type of the batteries and local regulation. Although this

product does not contain any harmful materials we suggest you to return the product to the dealer or directly

to the producer after usage.

Back-Up Power Supply BP-12

BP-12 set should be used everywhere where 12V DC back-up power supply is required.

Specification

input power supply adapter DE-20-15 (230 V AC / 15 V AC)

600 mA, 1.6 A fuse

back up battery 12V / 1.3 Ah - model Jablotron SA-214/1.3

output voltage 10,5 - 13.5 V DC, 1.6 A fuse

output current 400 mA permanent, (short time max. up to 1 A )

operating temperature -10 °C to +40 °C

complies with the essential requirements of: 89/336/EC EMC Directive - Protection concerning electro-

magnetic compatibility when is used for its intended purpose.

Original of the conformity assessment can be found at the web page www.jablotron.cz, section Technical support.

Contents

Plastic case with rubber sealing (125x85x55 mm), power supply PCB, adapter DE-20-15, battery

SA-214/1.3, dowels and screws.

Installation

Unscrew the plastic box cover andtake out the

battery. Install the plastic box on desired place us-

ing enclosed dowels and screws. Put the input and

output wires through the holes in the box. Fix the

PCB with electronics to connectors of the battery.

Connect input and output wires to the terminals and

place the set inside the plastic box. Put the sealing

in the cover and close the box. Fix it with screws.

Important

Handle the back-up battery with caution! The battery can cause serious damages or injury when

being short circuited!

Operation

When 15 V AC input voltage is present, the battery is being charged and the green LED is lit. If

the input voltage is not present, the green LED is off and output voltage is supplied by the battery.

Presence of the output voltage 12 V DC is indicated by yellow LED.

Troubleshooting

Yellow LED is off

1/ The battery may be discharged (due to long absence of input power)

2/ Check the built-in fuses.

Note: Dispose of batteries safely depending on the type of the batteries and local regulation. Although this

product does not contain any harmful materials we suggest you to return the product to the dealer or directly

to the producer after usage.

Internet: www.jablotron.cz

Tel.: +420 483 559 999

fax: +420 483 559 993

Pod Ska lko u 3 3

466 01 Jablonec nad Nisou

Czech Republic

Internet: www.jablotron.cz

Tel.: +420 483 559 999

fax: +420 483 559 993

Pod Ska lko u 3 3

466 01 Jablonec nad Nisou

Czech Republic

Product specificaties

Merk:	Jablotron
Categorie:	Beveiliging
Model:	BP-12

Heb je hulp nodig?

Als je hulp nodig hebt met Jablotron BP-12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Beveiliging Jablotron

Jablotron EYE-02 Handleiding

20 Maart 2023

Jablotron JA-60G Handleiding

20 Maart 2023

Jablotron JA-60B Handleiding

20 Maart 2023

Jablotron JA-63E Handleiding

20 Maart 2023

Jablotron JA-80D Handleiding

20 Maart 2023

Jablotron JA-50S Handleiding

20 Maart 2023

Jablotron JA-63F Handleiding

20 Maart 2023

Jablotron GBS-200 Handleiding

20 Maart 2023

Jablotron JA-63F wireless keypad Handleiding

20 Maart 2023

Jablotron CA-322 Accent Handleiding

20 Maart 2023

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging

Geemarc SOS-PRO 295 Handleiding

6 Maart 2024

Technaxx TX-106 Handleiding

4 Februari 2024

One2track Safety Angel Handleiding

16 Oktober 2023

Sygonix SY-3851632 Handleiding

16 Oktober 2023

Sygonix 1326052 Handleiding

16 Oktober 2023

Sygonix 43588A WLAN Camera Handleiding

16 Oktober 2023

Sygonix 43176S LAN Camera Handleiding

16 Oktober 2023

Sygonix SY-3181234 Handleiding

16 Oktober 2023

Sygonix Touch IP65 Handleiding

16 Oktober 2023

Sygonix 1882082 Handleiding

16 Oktober 2023