Ion TAPE 2 PC Handleiding

Ion Cassettespeler TAPE 2 PC

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion TAPE 2 PC (24 pagina's) in de categorie Cassettespeler. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

USB CASSETTE ARCHIVER

QUICKSTART MANUAL

ENGLISH ( 1 – 3 )

MANUAL DE INICIO RÁPIDO

ESPAÑOL ( 4 – 6 )

GUIDE D'UTILISATION SIMPLIFIÉ

FRANÇAIS ( 7 – 9 )

KURZANLEITUNG

DEUTSCH ( 10 – 12 )

MANUALE RAPIDO

ITALIANO ( 13 – 15 )

SNELSTARTGIDS

NEDERLANDS( 16 – 18 )

BOX CONTENTS

Please check to make sure that the following items are located in the box:

• Tape2PC cassette player

• USB cable

• RCA Cable

• Software CD

• Tape2PC Quickstart Manual

• Safety and Warranty Information

Please read the included Safety & Warranty Information booklet before using this product!

FRONT PANEL OVERVIEW

1. POWER BUTTON – Use this button to turn the

unit on and off. If the unit is not being used for a

prolonged period of time, please also remove the

AC plug from the power socket.

2. CASSETTE HOLDER – Insert your cassettes

into either of these two holders. The holders

may be opened by pressing the corresponding

[STOP/EJECT] button (14). Please note that

both decks can be used for playback but only

deck B can be used for recording/dubbing.

3. DYNAMIC NOISE REDUCTION – Dynamic

Noise Reduction should be turned on whenever

playing back tapes which were recorded using

this feature.

4. DISPLAY – The display will help you keep track

of audio levels and the features which have been

engaged.

PEAK LEVEL INDICATOR – The meters

indicate the audio level during recording

and playback.

REC – lights when deck B is recording or

in record-pause mode

HI SP DUB – lights when high-speed

dubbing mode is engaged

PLAY Cr02 – lights when Play Cr02

function is engaged

REC Cr02 – lights when Rec Cr02 function

is engaged

5. TAPE COUNTER AND [RESET] BUTTON –

The tape counter indicates the tape position

when playing or recording tapes (deck B only).

To reset the counter, press the [RESET] button.

6. REC LEVEL KNOB – Use this knob to adjust the

recording level when recording external sources

to deck B.

7. [PLAY Cr02] BUTTON – This feature should be

set depending on the kind of tape you are

playing. When using normal tapes, this feature

should be turned off (“PLAY Cr02” not lit on the

display). When using Cr02 tapes, this features

should be turned on (“PLAY Cr02” is lit on the

display).

8. [DUBBING] BUTTON – Press this button if you

would like to dub a tape from deck A to a tape in

deck B (“DUBBING” will light on the display).

9. [HI SP DUB] BUTTON – Press this button to

enable high-speed dubbing (“HIGH SPEED” will

light on the display). Press again to disable high-

speed dubbing.

10. REC Cr02 BUTTON – Turn this feature on when

recording to a Cr02 tape on deck B (“REC Cr02”

is lit on the display).

11. [PLAY] – Press to play the tape on the

corresponding deck.

12. [REWIND] – Press to rewind the tape on the

corresponding deck.

13. [FAST FORWARD] – Press to fast forward the

tape on the corresponding deck.

14. [STOP/EJECT] – Press to stop the tape on the

corresponding deck. When stopped, press again

to open the cassette holder.

15. [PAUSE] – Press to pause the tape on the

corresponding deck. Press again to resume

playback.

16. [RECORD] – Press this button in conjunction

with the [PLAY] button to begin recording.

Product specificaties

Merk:	Ion
Categorie:	Cassettespeler
Model:	TAPE 2 PC
Kleur van het product:	Zilver
Gewicht:	4000 g
Stroomvoorziening:	AC220V-230V@60Hz
Connectiviteitstechnologie:	Bedraad
Hoofdtelefoonuitgangen:	2
Interface:	USB
Ondersteund beeldformaat:	JPG
Impedantie:	50000 Ohm
Compatibele besturingssystemen:	Windows XP/Vista (32/64-bit)\nMac: OS X 10.4+
Signaal/ruis-verhouding:	58 dB
Afmetingen (B x D x H):	420 x 215 x 135 mm
Totale harmonische vervorming (THD):	1 procent
Stroomverbruik (typisch):	11.9 W