Inverto IDLB-QUDL24-MULTI-OPP Handleiding

Inverto Niet gecategoriseerd IDLB-QUDL24-MULTI-OPP

Lees hieronder de 📖 handleiding in het Nederlandse voor Inverto IDLB-QUDL24-MULTI-OPP (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

This innovative LNB was speciﬁcally designed for installations that make use of several LNBs on a satellite dish antenna. It’s novel

slim feed technology incorporating advanced dielectric materials and optimum front end design ensure maximum energy transfer

from the dish to the LNB circuits also when the LNB position is off the focal point. Further more, it’s long neck allows placing the

LNBs closely next to each other and gain access to satellites typically too close in their orbital position to be received with standard

neck LNBs on a certain satellite dish antenna. This LNB enables the reception of signal from one satellite and its distribution to up-to

4 single tuner Set-top boxes (or 2 in the case of a twin-tuner STB).

Main Features:

• Novel slim feed technology

• Low Phase Noise, DVB-S2 (HDTV) compliant

• Low Noise Figure

• Low power consumption

• High Cross-Pole performance

• High Frequency stability

Click object to rotate

For purpose of brevity, some product descriptions in this sheet remain at platform level and may not be referred to as detailed

datasheets of the products. Inverto Digital Labs reserves the right to amend, omit or add products, product-lines, and / or features

without notice.

For further details contact: sales@inverto.tv

FTA Communication Technologies S.a r.l Tel. +352 264 367 1 Fax. +352 264 313 68

ww o.tvw.inver t

Low Band Input Frequency Range

Low Band Output Frequency Range

LO Frequency

High Band Input Frequency Range

High Band Output Frequency Range

LO Frequency

Noise Figure

LO Initial Accuracy

LO Temperature Drift

LO Phase Noise @ 10K Hz

Conversion Gain

Gain Ripple

Gain Variation

Image Rejection

1 dB Compression Point (O/P)

Cross talk

Control Signals Ca [ V ]

Control Signals Cb [ H ]

Control Signals Cc [Band switching]

Output VSWR

Radiated Interference

DC Power

Working Temperature

Output Impedance (connect to STB)

Output connector

Weight

10.7~11.7 GHz

950~1950 MHz

9.75 GHz

11.7~12.75 GHz

1100~2150 MHz

10.6 GHz

0.2dB typ. (0.7dB max.)

+/- 1.0 MHz max.

+/- 3.0 MHz max.

-90 dBc/Hz max.

60 dB min.

+/- 0.75 dB/27MHz

+/- 4 dB

40 dB min.

0.0 dBm min.

23dB min.

11.0~14.0 V

16.0~20.0 V

22KHz +/- 4KHz 0.4V – 0.8V pp

2.0 : 1

-60 dBm max.

200mA max. @ 11 – 20V

-30~+60 °C

75Ω

F-type (female)

344 g

Technical data

V010714

Product specificaties

Merk:	Inverto
Categorie:	Niet gecategoriseerd
Model:	IDLB-QUDL24-MULTI-OPP
Kleur van het product:	Black, White
Gewicht:	344 g
Breedte:	173 mm
Hoogte:	132 mm
Stroomverbruik:	200 mA
RF aansluitingstype:	F
Bedrijfstemperatuur (T-T):	-30 - 60 °C
Output impedance:	75 Ohm
Geluid figuur:	0.2 dB
Input frequentiebereik:	10.7 - 12.75 GHz
Output frequentiebereik:	950 - 2150 MHz
Diameter voedingshoorn:	23 mm
Voltage Standing Wave Ratio (VSWR):	2.0:1
Ingangsbereik hoge frequentieband:	11.7 - 12.75 GHz
Ingangsbereik lage frequentieband:	10.7 - 11.7 GHz
Uitgangsbereik hoge frequentieband:	1100 - 2150 MHz
Uitgangsbereik lage frequentieband:	950 - 1950 MHz
Lokale oscillator (LO) ruisfase (10 kHz):	-90 dBc/Hz
Lage band LO frequentie:	9.75 GHz
Hoge band LO frequentie:	10.6 GHz
Valse uitstoot:	-60 dBmW
Conversieversterking:	60 dB
Spiegelonderdrukking:	40 dBmW
Temperatuurafwijking (±):	3 MHz
Initiële nauwkeurigheid (±):	1 MHz
Versterkingsrimpel (±):	0.75 dB
Controlesignaal Cc (bandomschakeling):	22 kHz
Voedingsspanning Ca (verticale polarisatie):	11 - 14 V
Voedingsspanning Cb (horizontale polarisatie):	16 - 20 V
Kruispolarisatie-isolatie:	22 dB
Compressiepunt (1 dB):	0 dBmW