Imarflex HDS-540 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Imarflex HDS-540 (4 pagina's) in de categorie Stijltang. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
SPECIFICATION
MODEL NO. : -540 HDS
RATED VOLTAGE : -230Va.c. / 60Hz 220
POWER CONSUMPTION : 1000 watts
IMPORTANT SAFEGUARDS
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated corresponds with the convenience outlet
(220-230Va.c.).
3. Do not use any appliance with a damaged cord or plug. If the cord is damaged it should be
replaced with the same type and size or bring the unit to the nearest authorized service center.
4. Close supervision is necessary when the dryer is use by or near children.
5. Use this unit only for its intended use. Do not use attachment not recommended by the
manufacturer.
6. Do not block the Air Inlet of the unit.
7. Do not insert any object into any openings
8. Do not place or drop in water or other liquid.
9. Do not immerse the unit in water.
10. Unplug the unit after use.
11. This unit is for household use only.
12. This unit is equipped with a safety thermostat, to protect from possible overheating. If the unit
turns OFF on its own while using, switch to OFF position and let it cool for several minutes
before using again.
13. Try heat settings on back of hand before using.
14. Use warm airflow for children; remember: a child’s skin and scalp are sensitive to heat.
15. Store the unit in a cool place.
DESCRIPTION OF PARTS
HOW TO U
1. Towel dry hair to remove excess moisture and to shorten drying time.
2. Plug IN the convenience outlet.
3. Slide up the Speed Selector Switch (LOW/HIGH).
4. Press and slide up the Cool Button Switch for Cool Air Flow.
5. Part hair into sections; blow dry section by section.
6. Unplug after use.
CHANGING THE ACCESSORIES
1. To remove existing accessory: Push and hold the button on the side of unit, turn the
accessory counter clockwise and pull.
2. To replace the accessory: Insert and align the arrow on the unit and circle on the
accessory, slightly turn clockwise until it clicks.
Wave Nozzle (Figure A)
The wave nozzle concentrates the ow of air to dry small areas of the hair.
Curling Iron (Figure B)
The curling iron attachment help you wave your style naturally.
Point Roll Brush (Figure C)
Before curling, lay strands of hair firmly over the brush and brush through from the roots to the
end. Then roll up the hair strands to form a curl. Now switch on the curling brush (Setting 1 or 2)
and allow the hot air to work on the curled hair until it is dry. Finally, press the C Button Switch ool
to cool the hair.
Big Roll Brush (Figure D)
The Big roll brush with metal barrel and ball tips for all types of styles.
Half Brush (Figure E)
The special design of the half brush ensures that the warm air is directed at the scalp, creating
maximum lift near the roots. It gives optimum body to your hair and helps you shape your style
easily.
Shrinkable Style Brush (Figure F)
The bristles can be retracted, allowing easy removal of the brush once the curl has dried.
Hanging Ring
For easy storage.
CLEANING AND MAINTENANCE:
1. Unplug and wait for the unit to cool down before cleaning.
2. Wipe the Body and Air Inlet of the unit with damp cloth. Do not use abrasive materials to avoid
scratches.
3. Detachable parts are washable with soap and water.


Product specificaties

Merk: Imarflex
Categorie: Stijltang
Model: HDS-540

Heb je hulp nodig?

Als je hulp nodig hebt met Imarflex HDS-540 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stijltang Imarflex

Handleiding Stijltang

Nieuwste handleidingen voor Stijltang

Dreame

Dreame Glamour Handleiding

17 November 2024
ETA

ETA 032890000 Handleiding

17 November 2024
WAD

WAD Kare Handleiding

11 November 2024
WAD

WAD Velozzi Handleiding

11 November 2024
WAD

WAD Mensa Handleiding

11 November 2024
WAD

WAD Kaya Handleiding

11 November 2024
Conair

Conair CS31N Handleiding

30 September 2024
Conair

Conair CS32N Handleiding

30 September 2024