IFi Audio Gemini3.0 Handleiding

IFi Audio Niet gecategoriseerd Gemini3.0

Lees hieronder de 📖 handleiding in het Nederlandse voor IFi Audio Gemini3.0 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

1. USB ‘A’ Audio( ) connector

This transmits the USB audio data. Connect it to a

USB port on the computer.

2. USB ‘A’ Power( ) connector

This transmits the USB power. Connect it to a USB

port on the computer.

Tip: For maximum performance, use with the iUSB3.0;

connect the Audio connector( ) to the USB output

port labelled ‘ ‘ ; connect the Power connector

( ) to the USB output port labelled ‘ ‘.

3. USB ’B’ connector

Connect this to the input of the USB DAC/Sound

card/Interface card etc.

Tip: The Gemini3.0 USB cable uses the iFi FINAL USB

connector. Made of aluminium alloy, the additional

shielding and rigidity has taken USB cable design to a

whole new level that adheres rigidly to the 90 ohms

impedance requirement.

4. RF Silencers – Fixed

All USB cables, due to their inherent nature,

inevitably pickup AND radiate radio

frequencies that negatively impact the

sonic performance.

To address this, there are three sets of RF Silencers

on the Gemini3.0 Dual-Headed USB cable.The two

Silencers at each end are most effective when

located as close to the respective USB connector as

possible.

Note: The custom-designed metal oxide ceramic RF

Silencers offer different permeabilities. Compared to

generic filters this atypical approach is incredibly

effective; over the widest frequency range.

5. Centre RF Silencer

Feel free to adjust this third RF Silencer by sliding it

along the cable as different setups may require

different adjustments to attain the optimal sonic

performance .

Tip: To start with, set the three RF Silencers to

the 'Golden Ratio', with the shorter section

closer to the USB 'B' connector (item 3 above).

USB (Data)

Construction: Minimu inductance parallel

construction

Conductors: 24 and 28AWG

Conductor material: Heavy OFHC continuous cast

copper silver matrix

Insulation: HD Polyethylene

Shielding: Quadruple-shields

Impedance: 90Ohms

AC spark insulation : 1500V

Connectors: iFi 'FINAL' USB connectors

Insulation resistance: 100Mohm

Tensile strength: 1500PSI

USB (Power)

Construction: Minimum inductance parallel

construction

Conductors: 12AWG

Conductor material: Heavy OFHC continuous cast

copper

Insulation: Linear Polyethelyne (LPE) insulation

Current Rating: 30A

Lengths/Weights: 0.7m / 150g (0.33 lbs)

1.5m / 170g (0.37 lbs)

Warranty period: 12months

Specifications

•

ifi-audio.com Ver1.1

warranty

In order to activate the warranty for this iFi

product, you must register with the iFi

website.

Component :

Serial no:

Terms & Conditions

ifi-audio.com

iFi guarantees that this iF i pr o du ct shall be free from defects in

materials and wo rkm an ship for a period of 1 year for parts and labour.

The war ranty period begins at th e date of retail sale by an authorized

iFi distributor/dealer and is subject to the follow ing r equirements and

understandin gs:

• It is the responsibility of the buyer within 30 d ays from the original

sale, to register an d activate th e p roduct warranty with the iFi

website.

• The original invo ice mu st b e p roduced for authentication prior to

any warranty claim.

• The iFi pro duct must not have been modified in any manner

whatsoever, or the warranty will imm ediately become void.

• The iFi war ranty is only valid in the country of origin al sale.

• The product must not have been stored in a hum id environment;

nor subjected to w eather, water, or saltwater spray.

• iFi shall not, under an y circumstances, be liable for any

incidental or consequential damages arising from the loss of property

or other damage or losses due to the failure of an iFi product. iFi is not

liable for loss of use or inconvenien ce caused by the failu re of an iFi

product. iFi is not liable for damage caused to other audio

components because of the failur e o f an iFi product.

• During the warranty period, iFi will repair th e product to

working order, or, at iFi's option, replace the d ef ective module with a

sim ilar available product.

• All repairs performe d after expiry of the warranty period will be

charged to the owner an d will carr y a 180-day warranty on parts and

labou r. The custom er is responsible for ship ping the un it to the iFi

dis tr ibutor in the or iginal packaging. This includes the payment of any

shipp ing charges and re lated taxes.

• Should any warranty issue s ar ise, the decision of iFi is full and

fin al.

21 35 44

•

65.00 mm

271.00 mm

Product specificaties

Merk:	IFi Audio
Categorie:	Niet gecategoriseerd
Model:	Gemini3.0

Heb je hulp nodig?

Als je hulp nodig hebt met IFi Audio Gemini3.0 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd IFi Audio

IFi Audio GO link Max Handleiding

13 December 2024

IFi Audio SupaNova Handleiding

18 September 2024

IFi Audio ZEN Phono 3 Handleiding

3 Juli 2024

IFi Audio ZEN Blue 3 Handleiding

3 Juli 2024

IFi Audio Mercury3.0 Handleiding

3 Juli 2024

IFi Audio Hip dac 3 Handleiding

3 Juli 2024

IFi Audio ZEN DAC Handleiding

3 Juli 2024

IFi Audio Gemini3.0 Handleiding

3 Juli 2024

IFi Audio xDSD Handleiding

3 Juli 2024

IFi Audio ZEN Air Blue Handleiding

3 Juli 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector AS-5030.3 V2 Handleiding

21 December 2024

Sabrent AU-MMCW Handleiding

21 December 2024

Sabrent AU-2X35 Handleiding

21 December 2024

Sabrent CB-RS232 Handleiding

21 December 2024

Owon 500W Handleiding

21 December 2024

Owon 300W Handleiding

21 December 2024

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024

Sabrent SB-HTSS Handleiding

21 December 2024