HQ EL-PIRLA30 Handleiding

HQ Bewegingsdetector EL-PIRLA30

Lees hieronder de 📖 handleiding in het Nederlandse voor HQ EL-PIRLA30 (45 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/45

27-03-2012

EL-PIRLA30

MANUAL (p. 2)

Outdoor lamp with motion sensors

ANLEITUNG (S. 5)

Außenlampe mit Bewegungsmelder

MODE D’EMPLOI (p. 8)

Lampe d'extérieur avec détecteur de

mouvement

GEBRUIKSAANWIJZING (p. 11)

Buitenlamp met bewegingsensors

MANUALE (p. 14)

Lampada da esterno con sensore di

movimento

MANUAL DE USO (p. 17)

Lámpara de exterior con detectores de

movimiento

HASZNÁLATI ÚTMUTATÓ (o. 20.)

Kültéri lámpa mozgásérzékelvel

KÄYTTÖOHJE (s. 23)

Ulkovalaisin liikkeentunnistimella

BRUKSANVISNING (s. 26)

Utomhuslampa med rörelsedetektor.

NÁVOD K POUŽITÍ (s. 29)

Venkovní osvtlení s pohybovými

senzor

MANUAL DE UTILIZARE (p. 32)

Lamp de exterior cu senzori de micare

 XPH H (. 35)

   

 

BRUGERVEJLEDNING (s. 38)

Udendørs projektør med

bevæ

elsessensorer

VEILEDNING (s. 41)

Utendørs lampe med bevegelsessensorer

ENGLISH

Outdoor lamp with motion sensors

Summary

The product is an energy-saving automatic lamp with integrated circuit and precise detection

components. It switches on if motion is detected and automatically off after no motion is detected for a

certain period of time. Its performance is stable. It can identify day and night.

Specifications

Power source: 100-130VAC

220-240VAC

Power frequency: 50/60Hz

Rated load: 150W max.

Time setting: Min. 5sec

Max. 7min±2min (adjustable)

Light control: <10LUX~2000LUX (adjustable)

Detection range: 12m (22°C) (adjustable)

Detection angle: 180° ~ 120°

Installation height: 2m ~ 4.5m

Operating humidity: <93%RH

Operating temperature: -10°C ~ +40°C

Weight: approx. 0.573kg Beam angle: (50%): 101.4°

IP44

Sensor Information

12m

Correct movement orientation

180°/120°

Detection angle

Luminous intensity: cd

Function

• Auto identification of day and night, the light-control can be adjusted, so it works at night

automatically and stops in daytime.

• Time setting can be adjusted.

Installation

N - Neutral

L - Live

- Earth

(1) Please shut off the power before installation.

(See following diagram)

(2) Loosen the screw on the rear lid of the junction box.

(3) Connect the power to the sensor lamp according to connection diagram.

(4) Install the sensor lamp in the selected location according to installation diagram.

(5) Replace the rear lid and tighten the screw. Test the lamp.

Test

1) Sensitivity: Adjust knob “1” clockwise to raise its sensitivity and counter-clockwise to reduce its

sensitivity.

2) Adjust knob “2” clockwise to lengthen operating time and counter-clockwise to shorten it.

3) Light control: Adjust knob “3” to select different illumination levels. (See Fig.)

4) Switch on the power, the lamp will turn on within 5s and turn off within 5-30s: after it turning off and

detecting motion the lamp will turn on again. Without detecting any motion it will turn off after

5~10s.

5) Turn the light control to night, cover the detection window (simulating night), and move in front of

the lamp. It turns on and will switch off after 5~10s if no movement is detected.

ATTENTION: When using this product, please adjust the sensitivity to an appropriate level;

please do not adjust the sensitivity to maximum, to prevent the product from working normal.

Too high sensitivity may detect the wrong kind of motion, such as the wind blowing leaves or

curtains, small animals.

If the product does not work normal, please try to reduce the sensitivity and test again.

Note

Do not install in direct sunlight or air stream and quick temperature changes. Do not touch or impact

the lens and do not clean with aggressive agents.

Product specificaties

Merk:	HQ
Categorie:	Bewegingsdetector
Model:	EL-PIRLA30
Kleur van het product:	Zwart
Gewicht verpakking:	680 g
Montagewijze:	Muur
Afmetingen verpakking (BxDxH):	143 x 205 x 127 mm
Type beeldsensor:	Passieve infraroodsensor (PIR)
Ingangsspanning:	220 - 240 V
Maximumbereik:	12 m
Bedrijfstemperatuur (T-T):	-20 - 40 °C