Honda HRH 536 HX Handleiding

Honda Grasmaaier HRH 536 HX

Lees hieronder de 📖 handleiding in het Nederlandse voor Honda HRH 536 HX (48 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
3RVF1621
00X3R-VF1-6210
2018
2 EN
SAFETY INSTRUCTIONS
For your own safety and operating comfort, it is highly
recommended that you read this manual in full.
Pay attention to these symbols and their meaning:
Indicates a high risk of severe personal injury or death if
instructions are not followed.
CAUTION:
Indicates a possibility of personal injury or equipment damage if
instructions are not followed.
NOTE: Source of useful information.
This sign means that you must take care during
certain operations. Refer to the safety instructions
on the following pages, to the point(s) indicated in
the box.
TRAINING
A1. Read the instructions carefully. Be familiar with the controls and the proper use
before using the equipment. Know how to stop the engine rapidly.
A2. Use the lawnmower for the purpose it is intended for, that is mowing and collecting
grass. Any other use could be dangerous or damage the equipment.
A3. Never allow children or people unfamiliar with these instructions to use the
lawnmower. Local regulations may restrict the age of the operator.
A4. Never mow when people, especially children or pets are nearby.
Never use the machine in cases of fatigue or illness of the user, or after
consumption of medications, drugs, alcohol or dangerous substances which
might interfere with his ability regarding r xes and concentration.efle
Never operate the machine if there is a risk of adverse weather such as lightning
or a storm, stop operation.
A5. Keep in mind that the owner or user is responsible for accidents or hazards
occurring to other people or their property.
A6
A7
.
.
Never attempt to modify the mower. It can cause an accident as well as damage
to the mower. Tampering with the engine voids the EU type-approval of this
engine.
Do not connect an extension to the muffler.
Do not modify the intake system.
Do not adjust the governor.
PREPARATION
B1. When using the machine, always wear safety shoes that are strong and non-slip
and long trousers. Do not use the machine with bare feet or wearing open shoes.
Avoid wearing chains, bracelets or baggy clothes with loose parts or with lacing
or neck ties. Long hair must be tied back. Always wear an anti-noise helmet.
B2. Thoroughly inspect the area where the equipment is to be used and remove all
objects which may be thrown by the machine (stones, branches, wires, bones,
etc...).
B3. WARNING - Petrol is highly mmable.fla
- Store fuel in containers specifically designed for this purpose.
- Refuel outdoors only, before starting the engine and do not smoke while
refuelling or handling fuel.
- Never remove the cap of the fuel tank or add petrol while the engine is running
or when the engine is hot.
- If petrol is spilled, do not attempt to start the engine but move the machine away
from the area of spillage and avoid creating any source of ignition until pet rol
vapours are dissipated.
- Replace all fuel tanks and container caps securely.
- Before tipping the lawnmower to maintain the cutting means or drain oil, remove
fuel from tank.
B4. Replace faulty silencers.
B5. Before use, always visually inspect the machine, especially to see that the cutting
means, cutting-means bolts and cutting-means assembly are not worn or
damaged.
Replace worn or damaged cutting means and cutting-means bol ts in sets to
preserve balance.
OPERATION
C1. Do not operate the engine in a con ned space where dangerous carbon monoxide
fumes can collect.
C2. Mow only in daylight or in good artificial light. Make sure to comply with legal
regulations which may vary from one region to another.
C3. If there is a risk of adverse weather such as lightning or a storm, stop operation.
C4. Avoid operating the equipment in wet grass, where possible.
C5. While mowing, always keep the safety distance to the cutting means, which is
provided by the handle length.
C7. Always be sure of your footing on slopes. Mow across the face of slopes, never
up and down.
C8. Keep in mind that the operator or user is responsible for any accidents or
unexpected events that may occur to other persons or their property. The user is
responsible for checking on possible risks due to the ground to be worked on, and
for taking all precautions necessary for ensuring his own safety and that of others,
in particular on sloping ground, rough, slippery or unstable terrain, or near h oles,
ditches or banks.
C9. Do not mow slopes of more than 20° (36%).
C10. Use extreme caution when pulling the lawnmower towards you.
C11. Stop the cutting means if the lawnmower has to be tilted for transportation when
crossing surfaces other than grass, and when transporting the lawnmower to and
from the area to be mowed.
C12. Never operate the lawnmower with defective guards or cutting-means enclosures,
or without safety devices such as discharge cover and/ or grass catchers.
C13. Do not change the engine governor settings or oversp eed the engine.
C14. Disengage all cutting-means control and drive clutch (self-propelled models)
before starting the engine.
C15. Start the engine carefully according to instructions and with feet well away from
the cutting means.
C16. Do not tilt the lawnmower when starting the engine.
Start the lawnmower on a level surface, free of high grass or obstacle.
C17. Keep hands and feet away from the rotating parts.
Do not start the engine when standing in front of the discharge opening.
C18. Never pick up or carry a lawnmower while the engine is running.
C19. Stop the engine and disconnect the spark plug cap in the following c ases:
- Before any operation under the cutting-means enclosure or the discharge chute.
- Before checking, cleaning or working on the lawnmower.
- After striking a foreign object. Inspect the lawnmower for damage and make
repairs before restarting and operating the lawnmower again.
- If lawnmower starts to vibrate abnormally. Check immediately the cause of the
vibration and perform the necessary repair.
C20. Stop the engine in the following cases:
- Whenever you leave the lawnmower unattended.
- Before refuelling.
C21. Stop the cutting means or the engine in the following cases:
- When installing or removing the grass catcher.
- Before adjusting the cutting height.
C22. Reduce the throttle setting during engine shut-down. Close the fuel shut-off valve
by turning the fuel shut-off valve.
C23. Using any attachments other than those recommended in this manual may cause
damage to your lawnmower, and such damage will not be covered by your
guarantee.
C24. CAUTION
The levels for noise and vibration indicated in this manual are the maximum
values for using the machine. The use of an unbalanced cutting means, an
excessive speed of movement and a lack of maintenance have a sign ant effectific
on sound emissions and vibration. It is therefore necessary to take preventive
measures to eliminate all possible damage due to high noise levels, and stresses
due to vibrations; please ensure that the machine is well maintained, wear an anti-
noise helmet. Take breaks during the work.
MAINTENANCE AND STORAGE
D1. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working
condition. Regular maintenance is an essential aid to user’s safety and retaining
a high level of performance.
D2. Never store the equipment with petrol in the tank inside a building when vapours
may reach an open flame, spark or high temperature source.
D3. Allow the engine to cool before storing in any enclosure.
D4. To reduce the fire hazard, keep the lawnmower, especially the engine and
silencer, the petrol storage area as well, free of grass, leaves, or excessive
grease.
Do not leave containers of grass cuttings in or near a building.
D5. If the fuel tank has to be drained, this should be done outdoors, with a cold engine.
D6. Check the grass catcher frequently for wear or deterioration.
D7. Do not use the machine with worn or damaged parts.
Parts must be replaced, not repaired. Replace worn or damaged parts with Honda
genuine parts.
Cutting means must always bear the mark Honda and the reference number.
Non equivalent quality parts may damage the machine and be prejudicial to your
safety.
D8. Wear thick gloves when removing or installing the cutting means or when cleaning
the cutting-means enclosure.
When tightening or loosening the cutting-means screws, use a wooden block to
prevent the cutting means from rotating.
D9. Always make sure the correct balance of the cutting means when sharpening.
SAFETY
C6. Do not run. Do not let yourself be pulled by the lawnmower.
The machine is equipped with safety devices that must never be modified or
removed, otherwise the warranty may be void and the manufacturer released from
any liability. Always check that the safety devices work before using the machine.


Product specificaties

Merk: Honda
Categorie: Grasmaaier
Model: HRH 536 HX
Kleur van het product: Black, Red
Gewicht: 60200 g
Breedte: 574 mm
Diepte: 1575 mm
Hoogte: 1020 mm
Geluidsniveau: 98 dB
Soort: Duwgrasmaaier
Stroombron: Benzine
Vermogen: 2700 W
Aantal wielen: 4 wiel(en)
Rotatiesnelheid: 2800 RPM
Maximale grasoppervlakte: 500 m²
Maaibreedte: 530 mm
Minimale maaihoogte: 21 mm
Maximale maaihoogte: 76 mm
Capaciteit brandstoftank: 1.5 l
Cilinderinhoud: 163 cm³
Aanbevolen gazongrootte: - m²
Grasvangbak: Ja
Inhoud opvangbak: 83 l
Maximale snelheid (vooruit): 1.4 km/h
Aantal takten motor: 4
Mulchfunctie: Ja
Soort instelling vrijloop: Stapsgewijs

Heb je hulp nodig?

Als je hulp nodig hebt met Honda HRH 536 HX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grasmaaier Honda

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Anova

Anova MTC620 Handleiding

22 December 2024
Anova

Anova MC100 Handleiding

22 December 2024
Anova

Anova CC146T Handleiding

20 December 2024
Anova

Anova E60BC Handleiding

20 December 2024
Anova

Anova CC151T Handleiding

20 December 2024
Gude

Gude 320/20-4 Handleiding

19 December 2024
Zipper

Zipper ZI-MOS4T Handleiding

19 December 2024
Ozito

Ozito CPM-300C Handleiding

10 December 2024
Powerblade

Powerblade 350CX Handleiding

10 December 2024
Powerblade

Powerblade V475 Handleiding

10 December 2024