Home Easy HE330 V2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Home Easy HE330 V2 (1 pagina's) in de categorie Smarth home. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
1
2
3
easy
HOME
HE330 V2
X3
GB: HE330
Contents:
1. HE330 3000W On/Off plug-in socket (Receiver) V2
Max Load: 3000W Resistive Load
2. HE312 Remote Control (Transmitter)V2
-30 Metre Range
-CR3032 Battery Powered (Included)
Each remote control socket is preprogrammed to a
On/Off button on the remote control.
To alter the program settings, see instructions below
GB: Programming the Plug-in Receiver
Each remote control socket must be programmed to the remote
control button:
1: Remove the plug-in receiver form the socket
2: Wait +5Sec and plug the receiver in to a socket Fig 1.
2: The LED on the front of the plug-in unit will flash Fig 2.
3: Hold the remote control close to the plug-in receiver socket
4: Press the 'On' button on the remote control Fig 3.
5: The plug-in receiver will now switch On/Off to indicate that the
remote control has been learnt Fig 4.
6: The socket is now ready to be used
up to 3 remote control buttons can be learnt to a single receiver
socket Fig 5
GB: Deleting a Remote Control from a the Plug-in Receiver
1: Remove the plug-in receiver form the socket
2: Plug the receiver in to a socket
3: Wait +5Sec and plug the receiver in to a socket
4: The LED on the front of the plug-in unit will flash
5: Hold the remote control close to the plug-in receiver socket
6: Press the 'Off' button (Fig)
7: The plug-in receiver will now switch On/Off to indicate that the
remote control has been removed from plug-in receiver's memory.
X2
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Project Manager
Mr G Hunter
@
http://www.
GB: Resting Plug-in Socket
To reset and remove all the remote controls learnt to the receiver socket.
1: Remove the plug-in receiver form the socket
2: Plug the receiver in to a socket
3: Wait +5Sec and plug the receiver in to a socket
4: The LED on the front of the plug-in unit will flash
5: Hold the remote control close to the plug-in receiver socket
6: Press the Group Off button
7: The plug-in receiver will now switch On/Off to indicate that the plug-in
remote control socket has been reset.
1
2
2 of 3 Memory Spaces
used.
www.homeeasy.eu
GB: CH Byron
Byron House
Sherwood Rd
Astonfields
Bromsgrove
B60 3DR
UK
Warning: Never exceed the product specification
GB: Specification
Plug-in Receiver Socket: HE330 v2
Input: 230-240V 50Hz
Max Resistive Laod: 3000W
Remote Control: HE312 v2
Range: 30Metres
Battery: CR2032
GB: Replacing Remote Control Battery.
1: Remove the battery cover from the Remote Control
2: Remove the ‘CR2032’ battery using a small screw
driver
2: Insert the new 'CR2032' battery, making sure the '+'
positive terminal is facing up
3: Replace the battery cover on the remote control.
Only use 'CR2032' battery.
WARNING Fire Hazard! Do not burn old batteries.
Dispose or recycle batteries according to local
regulations, do not dispose of as house hold waste.
Do not store batteries in any location where
temperatures may exceed 40°C.
easy
HOME
easy
HOME
X1
Fig 1.
easy
HOME
ON
easy
HOME
ON
easy
HOME
easy
HOME
X2
easy
HOME
ON
easy
HOME
ON
easy
HOME
easy
HOME
X2
easy
HOME
ON
easy
HOME
ON
easy
HOME
easy
HOME
0 of 3 Memory Space
used.
Plug-in Receiver Socket 1 On/Off
Group Plug-in Receiver Sockets On/Off
Tel: 0845 2301231 (UK)
Fax: 01527 57701
www.chbyron.com
support@chbyron.com
Fig 3.
Fig 2.
Fig 4. Fig 5.
Fig 1.
Fig 3.
Fig 2.
Fig 4. Fig 5.
Fig 1.
Fig 3.
Fig 2.
Fig 4. Fig 5.
0 of 3 Memory Space
used.


Product specificaties

Merk: Home Easy
Categorie: Smarth home
Model: HE330 V2

Heb je hulp nodig?

Als je hulp nodig hebt met Home Easy HE330 V2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Smarth home Home Easy

Handleiding Smarth home

Nieuwste handleidingen voor Smarth home