Hobart FP250 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Hobart FP250 (12 pagina's) in de categorie Keukenmachine. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com FORM 35000 Rev. A (December 2008)
FP250 FOOD PROCESSOR
MODEL
FP250 ML-136140
FP250 ML-136158
FP250
– 2 –
TABLE OF CONTENTS
GENERAL ............................................................................................................................................. 3
INSTALLATION .................................................................................................................................... 3
Unpacking ........................................................................................................................................ 3
Moving ............................................................................................................................................. 4
Location ........................................................................................................................................... 4
Electrical Connections .................................................................................................................... 4
Installing the Pusher Plate ............................................................................................................... 4
Checking the Safety Mechanisms ................................................................................................... 4
Installing the Cutting Plate ............................................................................................................... 5
Removing the Cutting Plate ............................................................................................................. 5
OPERATION .......................................................................................................................................... 6
Controls ........................................................................................................................................... 6
Feed Hopper .................................................................................................................................... 6
Operating with the Feed Hopper ..................................................................................................... 7
Feed Tube ....................................................................................................................................... 7
Operating with the Feed Tube ......................................................................................................... 7
Cutting Plate Guide (Fig. 11) ........................................................................................................... 8
CLEANING .......................................................................................................................................... 10
Immediately After Use ................................................................................................................... 10
MAINTENANCE ...................................................................................................................................11
Weekly Check .................................................................................................................................11
Transmission ..................................................................................................................................11
Cutting Plates .................................................................................................................................11
Service ............................................................................................................................................11
TROUBLESHOOTING ........................................................................................................................ 12
Β© HOBART, 2008
– 3 –
Installation, Operation and Care of
FP250 Food Processor
SAVE THESE INSTRUCTIONS
GENERAL
The model FP250 Food Processor can process vegetables, fruit, bread, cheese and nuts. Its sleek, angled
design allows food to be loaded easily into either a narrow feed tube or a full size feed hopper.
Various cutting plates can be used to slice, dice, grate, shred, julienne and make regular-cut and crinkle-
cut potato chips and french fries. In addition, the pusher plate has an assisting mechanism that reduces
the pressure needed to push food onto the cutting plates.
The FP250 also has two built-in safety mechanisms. An automatic start-stop mechanism stops the food
processor when the pusher plate is raised and swung away from the feed hopper and restarts the food
processor when the pusher plate is moved back over and into the hopper. The other mechanism keeps
the food processor turned off until the feed hopper is placed in the correct position.
To save space, wall-mounted storage racks are available. Each rack can hold three cutting plates.
INSTALLATION
UNPACKING
Immediately after unpacking the food processor, check for possible shipping damage. If the food processor
is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.


Product specificaties

Merk: Hobart
Categorie: Keukenmachine
Model: FP250

Heb je hulp nodig?

Als je hulp nodig hebt met Hobart FP250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Keukenmachine Hobart

Handleiding Keukenmachine

Nieuwste handleidingen voor Keukenmachine