Hikvision DS-PK1-LT-WE Handleiding

Hikvision Alarmsysteem DS-PK1-LT-WE

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-PK1-LT-WE (4 pagina's) in de categorie Alarmsysteem. Deze handleiding was nuttig voor 165 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

DS-PK1-LT-WE/WB Series

Wireless LCD Keypad

Diagram References

E N G L I S H

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without

notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR

LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM

CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS

PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL

NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN

THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Appearance

2Indication

+ identifies the positive terminal(s) of equipment which is used with, or generates direct current. - identifies the negative terminal(s) of equipment which is used with, or generates direct current.

No naked flame sources, such as lighted candles, should be placed on the equipment.

The serial port of the equipment is used for debugging only.

Install the equipment according to the instructions in this manual.

To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions.

Keep right direction when using the equipment.

The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation.

After the installation, the equipment, including any associated mounting plate, shall not be damaged.

Fault

Fire Alarm

Panic Alarm

Medical Alarm

Stay Arm

Away Arm

Settings

Output

Disarm

Back

Scroll Up/Delete

Scroll Down

Confirm

Swipe Tag

Query

Lock

Armed/Disarmed

Enrollment/Signal Strength

With Fault Enrollment

LED Description

Armed

Disarmed

Solid orange

Solid blue

Solid green

Alarm

Find Me Mode

Note: Event Alarm Priority > Tampering Alarm Priority

Tampering Alarm: Solid red

Event Alarm: Flashing red

No Alarm: Off

Flashing red

ONo Fault

Signal Strength

Power On

Back Light

Alarm

Flashing green: Strong

Flashing orange: Medium

Flashing red: Weak/Disconnect

Flashing orange: Enrolling

Green ashes 7 times: Enrolled

Solid green for 1 s

-The back light is on by default, you can set the On/O schedule on

the web client/APP of the control panel. Refer to the user manual of

control panel.

-It turns o when there is no key operation for more than 10 s to 30 s

(adjustable).

-If the keypad is not enrolled to the control panel, the back light is

o.

Tamper Switch

Power Switch

Touch Key Serial Port

MCU Serial Port

RFM Serial Port

Flashing green

Flashing blue

Entry Delay

Exit Delay

UD27093B

3Enrollment

4Installation

2. Attach the front panel onto the rear panel.

Note: The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment

and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including

any associated mounting plate, shall not be damaged.

1. Secure the rear panel on the wall with

four supplied screws.

3. Tighten the screw on the bottom

to complete.

Enroll the Peripheral Locally

Enroll the Peripheral with QR Code or Serial No.

1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enroll-

ment status.

2. Push the power switch of the peripheral to ON, and it will be automatically enrolled to the control panel.

Note: when the keypad has been enrolled to the control panel A, if there is a control panel B in the enrollment mode around

when the power is turned on, the keypad will enroll to the control panel B.

1. In the APP, tap the icon "+" and scan the QR code or enter the serial No. on the peripheral.

2. Push the power switch of the peripheral to ON, and it will be automatically enrolled to the control panel.

1. Remove the screw on the bottom of the keypad.

2. Disassemble the keypad and remove the rear panel.

3. Power on the security control panel.

4. Download and install APP.

4. Log in APP and tap the icon "+". Scan the QR code or enter the control panel serial No. to add the control panel.

5. Enroll the peripheral locally, with OR code, or with serial No..

Remove the screw on the bottom of the

keypad. Disassemble the keypad and remove

the rear panel. Scan the QR code on the rear panel of the keypad. Push the power switch to ON.

Check signal strength and select installation place

Enter the signal checking mode by operating on the control panel.

Signal LED flashes green: Strong.

Signal LED flashes orange: Medium.

Signal LED ashes red: Weak/Disconnected.

CAUTION

IF THE BATTERY COMPARTMENT

DOES NOT CLOSE SECURETLY,

STOP USING THE PRODUCT AND

KEEP IT AWAY FROM CHILDREN.

Buzzer Description

Two short beeps: Operation succedded

Three short beeps: Operation failed

Rapid short beeps: Entry delay

Slow short beeps: Exit delay

Repeated sound effects: Fire alarm/Medical alarm/Panic alarm/Lid opened alarm

Command

The keypad command is shown as follows.

Events Codes Notes

Arm

Away arm Password/Tag +

Password/Tag +

A short tag swiping (<3 s) is equal to a password.

Only the administrator and the installer have this permission.

Only the administrator and the installer and operators have

this permission.

The one-push arming is configured on the web client or APP

of the control panel.

The one-push arming does not require area selection.

1. When the area is selected, the corresponding page will be

displayed.

2. Duress passwords can be configured on the control panel.

Duress password +

1. Password/Tag + to enter the relay selection page

2. Use # to select/cancel the relay

3. Use to confirm

Password/Tag + # + Area No. +

Password/Tag + (Hold ≥3 s)

Password/Tag +

After enabled, the keypad can be

armed with or

(Short press)

(Hold ≥3 s)

Password/Tag + # + Area No. +

Stay arm

Disarm

Area away arm

Area disarm

Area stay arm

Duress password

disarm

Disarm

Silence Silence

Alarm

Lock

Relay

Settings

One-push Arm

Delete

Query Query fault 1. Password/Tag +

2. Use # to confirm

Lock/Unlock

keypad

Relay output

Settings

One-push Arm

Backspace

Delete all

Fire alarm (Hold ≥3 s)

(Hold ≥3 s)

Hold (≥3 s) to lock the keypad for 60 s. Hold (≥3 s) again or wait 60 s to unlock.

Panic alarm

Medical alarm

Arming Process (Enabled/Disabled on Control Panel)

Pre-arming

Indication:

The keypad displays "Waiting for arming"

The fault LED turns solid orange

Fault Checking

Indication:

All faults of the control panel and the zones to be operated will be displayed. You need to use scroll keys to view all faults

before next operation.

- Away arming: Confirm by

- Stay arming: Confirm by

- Cancel:

The fault LED turns ashing orange

Exit Delay

Indication:

The keypad displays "Exit delay"

The arming LED turns ashing blue and the buzzer indicates exit delay.

Arm Directly

Press the or to arm the device.

Indication:

Armed: arming LED solid blue for 5 s. Buzzer beeps twice.

Arming failed: Buzzer beeps three time.

Cancel

Press the to cancel the arming process.

Indication:

Armed: Buzzer beeps twice.

Arming failed: Buzzer beeps three time.

No Instant Operation

The count down is nished.

Indication:

Armed: arming LED solid blue for 5 s. Buzzer beeps twice.

Arming failed: Buzzer beeps three time.

Product specificaties

Merk:	Hikvision
Categorie:	Alarmsysteem
Model:	DS-PK1-LT-WE
Kleur van het product:	Wit
Gewicht:	282 g
Stroomvoorziening:	4 x CR123
Connectiviteitstechnologie:	Draadloos
Aantal:	1
Afmetingen (B x D x H):	174.63 x 25.25 x 109.62 mm
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent