Heatmiser PRTHW-WTS Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Heatmiser PRTHW-WTS (17 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
1Model: PRT/HW-WTS
Model: PRT/HW-WTS
Model: PRT/HW-WTS
Wireless Series
Table Of Contents
1
3Wireless Series
What is a Programmable Room Thermostat?
A programmable room thermostat is both a programmer and a room thermostat.
The programmer allows you to set “On” and “O periods to suit your own lifestyle.
The room thermostat works by sensing the air temperature, switching on the heating
when the air temperature falls below the thermostat setting, and switching it o once
this set temperature has been reached.
So a programmable room thermostat lets you choose what times you want the heating
to be on, and what temperature it should reach while it is on. It will allow you to select
dierent temperatures in your home at dierent times of the day (and days of the week)
to meet your particular needs and preferences.
Setting a room thermostat to a higher temperature will not make the room heat up
any faster. How quickly the room heats up depends on the design & size of the heating
system.
Similarly reducing the temperature setting does not aect how quickly the room cools
down. Setting a programmable room thermostat to a lower temperature will result in the
room being controlled at a lower temperature, and saves energy.
The way to set and use your programmable room thermostat is to nd the lowest
temperature settings that you are comfortable with at the dierent times you have
chosen, and then leave it alone to do its job.
5Wireless Series
1
Installation Procedure
Wall Mounting:
Step 1
Fix the wall plate to the wall.
Step 2
Push the thermostat onto the wall plate.
Desk Stand:
Step A
Remove the thermostat from the wall plate.
Step B
Release the desk stand.
Do
Mount the thermostat at eye level.
Read the instructions fully so you get the best from our product.
Don’t
Do not push hard on the LCD screen as this may cause irreparable damage.
Do not install near to a direct heat source as this will aect functionality.
If using the desk stand, ensure the thermostat is away from heat sources.
7Wireless Series
1 432 5
10
11
19
16
LCD Display
6
13
14
9
15
18
21
7 8
17
20
12
9Wireless Series
To pair the thermostat with the RC1-WTS receiver, follow these steps.
On the receiver;
Press the Pair button once.
The Communication LED will light up.
On the thermostat;
• Press PROG and then SETUP ..................................................................................
• At the top of the LCD, you will see 01.
• Use the Up key to select 05 and enter the pairing function ....................................
Note: The PRT/HW-WTS assigns heating output to Zone 1 & hot water to Zone 2 on the
RC1-WTS receiver.
• In the centre of the LCD, you will see 01.This is the channel address.
The default setting of 01 can be used in most cases, but should be changed when
a conict is detected with other RF devices.
• Use the Up/Down keys to enter the address ......................................................
• Press SETUP to Pair the thermostat and receiver ........................................................
Note: You must nish pairing the thermostat before the communication LED goes out.
Pairing the Thermostat Pair Successful
11 Wireless Series
Temperature Display
To set the clock, follow these steps.
• Press PROG ................................................................................................................
• Press CLOCK ..............................................................................................................
• Use the Down key to set the hours ..................................................................
• Use the Up key to set the minutes ...................................................................
• Use the Day key to set the day of the week ..................................................
• Press DONE to conrm and exit ........................................................................
Setting the Clock
Hours
Change Hours
Minutes
Day
Change Minutes
13 Wireless Series
• Press PROG ..................................................
Comfort levels allow you to set dierent temperatures throughout the day. For example,
you may want the home warm in the morning when you are getting ready for work,
cooler during the day when the house is unoccupied and then warmer in the evening
when you are home relaxing.
The thermostat oers 2 programming options:
5/2 Day Programming - 4 levels for the weekdays and 4 dierent levels for the weekend.
7 Day Programming - 4 levels for each day.
See pages 25-26 for details on how to switch between these modes.
Tip! If you don’t want to use all of the comfort levels, just set the time to --.--
Comfort Levels Explained
Default comfort levels are pre-programmed but you can change them easily.
Weekday Level Time Temp
Wake 07:00 21°C
Leave 09:00 16°C
Return 16:00 21°C
Sleep 22:00 16°C
Weekend Level Time Temp
Wake 09:00 21°C
Leave 22:00 16°C
Return --,-- --°C
Sleep --,-- --°C
1615 Wireless PRT/HW-WTSSeriesModel:
•฀ Press PROG ............
•฀ Press TIMER, (Time•฀ Use the Up/Down ke•฀ Press OFF ................•฀ Use the Up/Down ke•฀ Repeat these steps fo•฀ Press DAY to select t•฀ When complete, pres
In 7 Day mode, the thermostat will display Tue.
The PRTHW-WTS o฀ers an additional timed ouThe thermostat o฀ers 2 programming options: 5/2 Day Programming - 4 levels for the weekda7 Day Programming - 4 levels for each day.
See pages 25-26 for details on how to switch be
Tip! If you don’t want to use all of the comfort Default switching times are pre-programmed buWeekday Level On Time O฀ TimeWake 07:00 09:00Leave 16:00 20:00Return --,-- --,--Sleep --,-- --,--Weekend Level On Time O฀ TimeWake 07:00 09:00Leave 16:00 20:00Return --,-- --,--Sleep --,-- --,--
Hot Water Timings Explained
In 5/2 Day mode the thermostat will display “Sat Sun” prompting you to program the hot water levels for the weekend.
17 Wireless Series
Keypad Lock Indicator
Locking the Keypad
The thermostat has a keypad lock facility.
• To activate the lock press the bottom right corner of the display and hold for 10 secs.
• When activated, you will see the Keypad Lock symbol.
• To cancel, press the bottom right corner of the display again for 10 secs.
Clean Screen
Pressing will disable all keys, providing you 15 seconds to wipe the screen
clean before the keys are re-activated.
Temperature Contro
19 Wireless Series
The temperature hold function allows you to manually override the current
operating program and set a dierent temperature for a desired period.
• Press HOLD .........................................................................................................................
• Use the top set of Up/Down keys set the hold period .......................................
• Use the center set of Up/Down keys to set the hold temperature ................
• Press DONE to conrm and exit .................................................................................
To cancel a temperature hold, follow the same steps but reduce the time to 00:00.
Temperature Hold
Hold Icon
Hold Time
Hold Temperature
Holiday
21 Wireless Series
Pressing the key once will place the thermostat in frost protect mode.
In this mode, the thermostat will display the frost icon and will only turn the heating on
should the room temperature drop below the set frost temperature (see page 23).
Should the heating be turned on whilst in frost mode, the ame symbol will be
displayed.
To cancel the frost protect mode, press the key once.
Frost Protection Mode Enabled
Frost Mode Heating On/O
23 Wireless Series
THE FOLLOWING SETTINGS ARE OPTIONAL AND IN MOST CASES
NEED NOT BE ADJUSTED
Feature 01 – Temperature Format: This function allows you to select between °C or °F.
Feature 02 - Switching Dierential: This function allows you to increase the switching
dierential of the thermostat. The default is 1°C which means the thermostat will
switch the heating on 1°C below the set temperature and will turn it o when the set
temperature is achieved. With a 2°C dierential, the heating will switch on 2°C below the
set temperature and will switch o when the set temperature is achieved.
Feature 03 – Frost Protect Temperature: This is the temperature maintained when the
thermostat is in frost mode. The range is 07-17°C. The default is 12°C and is suitable for
most applications.
Feature 04 – Output Delay: To prevent rapid switching, an output delay can be entered.
This can be set from 00 -15 minutes. The default is 00 which means there is no delay.
Feature 05 – Pairing Function: Allows the thermostat to be paired with the receiver.
Feature 06 - Fail Safe: If enabled, the thermostat will send a signal to the receiver every
20 minutes. Should the receiver fail to receive the signal from the thermostat, the receiver
will activate the output for 20% of the time. This is to protect the system against a loss of
wireless signal or in case the thermostat battery fails whilst you are away.
Optional Features Explained
25 Wireless Series
Optional Settings -
To adjust the optional settings, follow these steps.
• Press PROG ...........................................................................................................................
• Press SETUP .........................................................................................................................
• Use the Up/Down keys at the top of the screen to select the feature
number (shown on page 26) and then use the Up/Down keys in the
center to adjust the setting ............................................................................................
• Press DONE to conrm settings and exit ...................................................................
Adjusting the Optional Settings
Feature Number
Setting Value
27 Wireless Series
If you need to re-calibrate the thermostat, follow these steps.
• Press and hold the Power key to turn the thermostat OFF ..............................
• Press and hold the OFF key until the temperature appears on screen ........
• Use the Up/Down keys to congure the new temperature .........................
• Press DONE to conrm settings and exit .......................................................................
• Press the Power key once to turn the thermostat back ON .............................
Re-calibrating the Thermostat
Calibration Temperature
Set Icon
Factory Reset
29 Wireless Series
Battery Recharging
The thermostat is equipped with a rechargeable battery.
The battery can provide power for up to 6 months before recharging is required in
normal operating conditions.
To recharge the battery you need to connect the thermostat to a power source.
A mini USB to USB lead is supplied with the thermostat so you can recharge from the
USB port on your laptop or PC.
Part ref: USB-02
31 Wireless Series
Twitter: heatmiseruk
Facebook: facebook.com/thermostats
Want More Information?
Call our support team on: +44 (0)1254 669090
Or view technical specications directly on our website:
www.heatmiser.com
PDF FAQ
Heating Professionals:
Request a copy of our product
installation guide containing
detailed technical specications
for our complete product range:
www.heatmiser.com/guide


Product specificaties

Merk: Heatmiser
Categorie: Thermostaat
Model: PRTHW-WTS

Heb je hulp nodig?

Als je hulp nodig hebt met Heatmiser PRTHW-WTS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Heatmiser

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat