Hansgrohe 04201000 Handleiding
Hansgrohe
Douchesysteem
04201000
Lees hieronder de 📖 handleiding in het Nederlandse voor Hansgrohe 04201000 (12 pagina's) in de categorie Douchesysteem. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
IP C
04210000
04211000
04212000
IP E
04199000
04200000
04201000
IP S
04203000
04204000
04205000
Installation Instructions / Warranty
2
IP Trim Sets
IP C valve trim 04212000
IP E valve trim 04201000
IP S valve trim 04205000
shower arm -- included with shower sets and
tub/shower sets only
tub spout -- included with tub/shower sets
only
Valve trim only
IP C 04212000
IP E 04201000
IP S 04205000
Shower set (includes valve trim, shower arm,
showerhead)
IP C 04211000
IP E 04200000
IP S 04204000
Tub/shower set (includes valve trim, shower arm,
showerhead, tub spout)
IP C 04210000
IP E 04199000
IP S 04203000
3⅛"
7¾"
3"
7¾"
2½"
5¼"
½"
2½"
½" NPT
2½"
5"
5½"
3½"
7¾"
3
Installation considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• Pressure balance valve rough 04120000 (not
included) must be installed, and the finished
wall surface must be installed and made wa-
tertight before installation of this trim kit.
• The tub spout (included with 04210000 /
04199000 / 04203000 only) requires a ½"
NPT male nipple, extending 4" - 4 ¼" outside
the surface of the finished wall.
• The shower arm requires a ½" NPT female
fitting.
• The max. flow rate of the valve is 4.5 GPM.
IP C showerhead
1.6 GPM max
Full spray, massage, intense
massage
IP E,S showerhead
1.6 GPM max
Full spray, massage, intense
massage
• The max. flow rate of the showerhead is 1.6
GPM.
• The shower valve incorporates a high tem-
perature limit stop which must be set to comply
with local plumbing codes.
• This product is for use with shower heads rated
at 1.5 GPM (5.6 l/min) or higher.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F. In
Massachusetts, the maximum output tempera-
ture can be no higher than 112° F.
• Know and follow all applicable local plumb-
ing codes when setting the temperature on the
water heater.
½"
3"
5¼"
2
6
°
2
6
°
3¼"
G ½
3"
4"
2
6
°
2
6
°
Product specificaties
| Merk: | Hansgrohe |
| Categorie: | Douchesysteem |
| Model: | 04201000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Hansgrohe 04201000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Douchesysteem Hansgrohe
11 December 2024
16 April 2023
3 Maart 2023
30 Januari 2023
13 Januari 2023
18 November 2022
8 November 2022
Handleiding Douchesysteem
- Douchesysteem IKEA
- Douchesysteem Panasonic
- Douchesysteem Delta
- Douchesysteem Dimplex
- Douchesysteem GRE
- Douchesysteem Haws
- Douchesysteem Hozelock
- Douchesysteem Miomare
- Douchesysteem Juno
- Douchesysteem Fieldmann
- Douchesysteem Curaqua
- Douchesysteem Schütte
- Douchesysteem Gustavsberg
- Douchesysteem Thermomate
- Douchesysteem Sani-Lav
- Douchesysteem Fala
- Douchesysteem Omnires
- Douchesysteem Pulse ShowerSpas
- Douchesysteem BMI
- Douchesysteem ECOstyle
- Douchesysteem Rogerseller
- Douchesysteem Belanger
- Douchesysteem Symmons
Nieuwste handleidingen voor Douchesysteem
13 December 2024
25 November 2024
16 November 2024
4 September 2024
29 Augustus 2024
11 Juli 2024
11 Juli 2024
10 Juli 2024
10 Juli 2024
10 Juli 2024