Hamilton Beach Revolution HBS1400 Handleiding

Hamilton Beach Blender Revolution HBS1400

Lees hieronder de 📖 handleiding in het Nederlandse voor Hamilton Beach Revolution HBS1400 (37 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/37
840138400
9/05
www.commercial.hamiltonbeach.com
Série Révolution
Râpe-glace/Mélangeur
Manuel d’utilisation
Page 18
Revolution Series
Ice Shaver/Blender
Operation Manual
Page 2
Serie Revolution
Granizadora de Hielo/
Licuadora
Manual de Instrucciones
Pagina 34
wWARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Ice Shaver/Blender Safety
You will be killed or seriously injured if
you don’t follow instructions.
You can be killed or seriously injured if
you don’t follow instructions.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER” or
“WARNING.” These words mean:
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what
can happen if the instructions are not followed.
wDANGER
wWARNING
IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your
operator training program.
wWARNING
Cut Hazard
Do not attempt to operate ice shaver without
cover in place.
Do not put place anything except ice in the
ice hopper.
Always make sure splash shield is in place
when blending.
Do not put hands, spoons or other utensils
in jar when blending.
Failure to follow these instructions can result
in broken bones, cuts or other injuries.
2
For assistance or replacement parts, call our
Technical Service number:
866-285-1087 910-693-4277or
8 a.m. 5:00 p.m. EST Monday Friday
www.commercial.hamiltonbeach.com
Technical Service
3
Blender Safety
1. Read the Operation Manual before using blender.
Keep Operation Manual handy.
2. Plug into a grounded 3-prong outlet.
3. Do not remove ground prong.
4. Do not use an adapter.
5. Do not use an extension cord.
6. Disconnect power before cleaning or servicing.
7. To reduce risk of personal injury, unplug cord from
outlet when not in use, and before putting on or
taking off parts.
8. To protect against electrical shock, do not immerse
cord, plug, or blender base in water or any other liquid.
9. Do not spray the base with a high-pressure spray gun.
10. Do not use appliance for other than intended use.
11. Not intended for use by or near children.
12. The use of accessory attachments not recommended
by Hamilton Beach may cause injuries.
13. To reduce risk of personal injury and to prevent
damage to blender or container and cutter assembly,
DO NOT insert utensils into blender container while
operating blender.
14. Do not fill the ice hopper with anything other than ice.
15. Do not store any kitchen utensils in the container
because the blender will be damaged if
inadvertently turned on.
16. To prevent possibility of serious personal injury, keep
hands out of blender jar while operating blender.
Always operate blender with jar cover in place.
17. Avoid contacting moving parts.
18. Blades are sharp. Handle carefully.
19. If cutter assembly blades are loose, discontinue use
immediately and replace cutter assembly. Do not
attempt to repair or tighten cutter assembly.
20. Inspect container and cutter assembly daily. Check
cutter for wear, nicks, or broken blades. Replace cutter
assembly at least every 90 days.
SAVE THESE INSTRUCTIONS
21. Do not use outdoors.
22. This appliance is intended for short periods of
operation, with a rated operating time of 3 minutes.
23. Do not operate the blender without the splash guard
in place.
24. Do not exceed the maximum capacity. The maximum
capacity equals the ounces (liters) listed on the
container, and signficantly less with thick mixtures.
25. Do not use more than 5 cups (1.3 liters) of cleaning
solution when cleaning the ice hopper. See “Caring for
the Ice Shaver/Blender”.
26. To prevent damage to blender, container, or cutter
assembly, DO NOT move or shake blender while in
operation. If blending action stops during operation,
turn blender OFF, remove container from base, remove
container cover, and use a thin rubber spatula to push
mixture towards cutters.
27. To prevent burns from hot liquids splashing out of the
container, always remove the filler cap of the container
cover before blending hot liquids.
28. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped
or damaged in any manner. Call the Technical Service
number, or 866-285-1087 910-693-4277, for
instructions on examination, repair, or electrical or
mechanical adjustment.
29. If the supply cord of this appliance is damaged, it must
be replaced by the manufacturer or its service agent or
a similar qualified person. If fitted with a non-rewirable
U.K. plug, the 13 amp fuse approved by ASTA to be
B.S. 1362 must be used. If you need a replacement
fuse carrier, it must be replaced by the same colour
coded carrier with the same markings. Fuse covers and
carriers can be obtained from approved service agents.
IMPORTANT: If the molded plug is cut off, dispose of it
immediately. The plug is not rewirable and would cause
a shock hazard if inserted into a socket.
IMPORTANT SAFETY INSTRUCTIONS
WARNING When using electrical appliances, basic safety precautions should be followed, including
the following:


Product specificaties

Merk: Hamilton Beach
Categorie: Blender
Model: Revolution HBS1400

Heb je hulp nodig?

Als je hulp nodig hebt met Hamilton Beach Revolution HBS1400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Hamilton Beach

Handleiding Blender

Nieuwste handleidingen voor Blender