Hamilton Beach Expeditor HBF600 Handleiding
Hamilton Beach
Blender
Expeditor HBF600
Lees hieronder de đ handleiding in het Nederlandse voor Hamilton Beach Expeditor HBF600 (49 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/49
840193603
11/11
Find Recipes and Demo Videos at
www.commercial.hamiltonbeach.com
MĂ©langeur haute
performance
Manuel dâutilisation
Page 4
High-Performance
Food Blender
Operation Manual
Page 2
Licuadora de
Alimentos de
Alto Desempeño
Manual de Uso
PĂĄgina 6
READ BEFORE USE.
LIRE AVANT DâUTILISER.
LEA ANTES DE USAR.
2
1. Read the Operation Manual before using blender.
Keep Operation Manual handy.
2. Before first use, wash container assembly in hot,
soapy water. Do NOT place in dishwasher.
3. Plug into a grounded outlet.
4. Do not remove ground.
5. Do not use an adapter.
6. Do not use an extension cord.
7. Disconnect power before cleaning or servicing.
8. To reduce risk of personal injury, unplug cord from
outlet when not in use and before putting on or taking
off parts.
9. Unplug the blender and inspect the power cord
insulation for cracks on a weekly basis. Refer to
âTechnical Servicesâ for repair or replacement.
10. To protect against electrical shock, do not immerse
cord, plug, or blender base in water or any other
liquid.
11. Do not spray the base with a high-pressure spray gun.
12. Extreme caution must be used when moving an
appliance containing hot oil or other hot liquids.
13. Do not use appliance for other than intended use.
14. Not intended for use by or near children.
15. This appliance is not intended for use by persons
with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
16. The use of accessory attachments not recommended
by the appliance manufacturer may cause injuries.
17. To reduce risk of personal injury and to prevent
damage to blender or container and cutter assembly,
DO NOT insert utensils into blender container while
operating blender.
18. Do not store any kitchen utensils in the container
because the blender would be damaged if
inadvertently turned on.
19. To prevent possibility of serious personal injury, keep
hands out of blender container while operating
blender.
20. Avoid contacting moving parts. Switch off the
appliance and disconnect from power supply before
changing accessories or approaching parts that move
in use.
21. Blades are sharp. Handle carefully.
22. If cutter assembly blades are loose, discontinue use
immediately and replace cutter assembly. Do not
attempt to repair or tighten cutter assembly.
23. Inspect container and cutter assembly daily. Do not
use broken, chipped, or cracked container. Check
cutter for wear, nicks, or broken blades. Do not use
broken, loose, or cracked cutting blades.
24. Do not use outdoors.
25. This appliance is intended for short periods of
operation, with a rated operating time of 3 minutes.
26. Do not leave blender unattended while it is operating.
27. To prevent damage to blender, container, or cutter
assembly, DO NOT move or shake blender while in
operation. If blending action stops during operation,
turn blender OFF ( ), remove container from base,O
remove container cover, and use a thin rubber spatula
to push mixture towards cutters.
28. When blending hot liquids, remove center piece of
two-piece lid. Hot liquids may push lid off jar during
blending. To prevent possible burns: Do not fill blender
jar beyond the 1 quart (1 liter) level. With the
protection of an oven mitt or thick towel, place one
hand on top of lid. Keep exposed skin away from lid.
Start blending at lowest speed.
29. Always operate blender with container cover in place.
30. This blender is designed with motor overload
protection. If the motor stops during operation due to
overheating, unplug the unit and allow it to cool down
for 15 minutes. Plug unit back after 15 minutes to
resume normal operation.
31. The normal function of this product may be disturbed
by strong electromagnetic interference. If this occurs,
simply reset the product and resume normal operation
by following the operation manual. If normal operation
cannot be resumed, place the product in a different
location.
32. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions. If the supply
cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified
persons in order to avoid a hazard. Refer to âTechnical
Servicesâ for contact information on examination,
repair, electrical or mechanical adjustment.
â SAVE THESE IN STRUC TIONS â
IMPORTANT SAFEGUARDS
WARNING â When using electrical appliances, basic safety precautions should be followed,
including the following:
Blender Safety
3
Cut Hazard
Always place cover on container when
blending.
Do not put hands, spoons, or other
utensils in container when blending.
Failure to follow these instructions can
result in broken bones, cuts, or other
injuries.
Burn Hazard
Always use caution when blending
hot contents.
Failure to follow these instructions can
result in burns.
Sanitize using 1 tablespoon (15 ml) of household
bleach per 1 gallon (3.8 liter) of clean, cool water
(60°F/16°C), mixed according to the instructions
on the bleach.
1. Fill container with sanitizing solution, replace
cover and filler cap and run on LOW (1) speed
for 2 minutes. Empty container.
2. Wipe exterior with soft cloth dampened with
sanitizing solution.
3. Immerse cover and filler cap in sanitizing solution
for 2 minutes.
4. Place empty container on base and run on HIGH
(10) speed for 2 seconds to remove any moisture
from the cutter assembly.
5. When ready to use, rinse with clean water.
For assistance or replacement parts, call our
Technical Services number:
1-866-285-1087 (USA, Canada)
or 910-693-4277 (all others)
8 a.m. â 5 p.m. EST Monday â Friday
www.commercial.hamiltonbeach.com
Technical Services
Sanitizing
Electrical Shock Hazard
Disconnect power before
cleaning blender base.
Failure to follow these
instructions can result in
death or electrical shock.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
8 11 13
Blender Safety
Product specificaties
Merk: | Hamilton Beach |
Categorie: | Blender |
Model: | Expeditor HBF600 |
Heb je hulp nodig?
Als je hulp nodig hebt met Hamilton Beach Expeditor HBF600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Blender Hamilton Beach
1 December 2024
1 December 2024
1 December 2024
16 November 2024
5 November 2024
5 November 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
16 Juli 2024
Handleiding Blender
- Blender Electrolux
- Blender Braun
- Blender Bosch
- Blender Philips
- Blender Panasonic
- Blender AEG
- Blender BEKO
- Blender Grundig
- Blender Inventum
- Blender Kenwood
- Blender Krups
- Blender Medion
- Blender Quigg
- Blender Siemens
- Blender Tefal
- Blender Unold
- Blender Adler
- Blender Afk
- Blender Akai
- Blender Alessi
- Blender Ambiano
- Blender Amica
- Blender Ariete
- Blender Bamix
- Blender Bartscher
- Blender Beem
- Blender Bellini
- Blender Beper
- Blender Bestron
- Blender Bifinett
- Blender Blaupunkt
- Blender Blendtec
- Blender Blokker
- Blender Bodum
- Blender Bomann
- Blender Boretti
- Blender Bourgini
- Blender Brabantia
- Blender Brandt
- Blender Breville
- Blender Buffalo
- Blender Bugatti
- Blender Domo
- Blender Domoclip
- Blender Dualit
- Blender Duronic
- Blender Efbe-schott
- Blender Emerio
- Blender Esge
- Blender Esperanza
- Blender Espressions
- Blender ETA
- Blender Eufy
- Blender Exquisit
- Blender Fagor
- Blender Farberware
- Blender Fritel
- Blender G3 Ferrari
- Blender Galanz
- Blender Gastroback
- Blender GE
- Blender George Foreman
- Blender Gorenje
- Blender Gourmetmaxx
- Blender Graef
- Blender H.Koenig
- Blender Haier
- Blender Hanseatic
- Blender Hendi
- Blender Hitachi
- Blender Homeland
- Blender Hotpoint
- Blender Hyundai
- Blender Innoliving
- Blender InstantPot
- Blender Kalorik
- Blender Kambrook
- Blender Kenmore
- Blender Kitchen Crew
- Blender KitchenAid
- Blender Klarstein
- Blender Koenic
- Blender Koenig
- Blender Kogan
- Blender Konig
- Blender Korona
- Blender Lagrange
- Blender Laica
- Blender Livington
- Blender Livoo
- Blender Logik
- Blender Maestro
- Blender Magic Bullet
- Blender Magimix
- Blender Maxwell
- Blender Melissa
- Blender Mesko
- Blender Mia
- Blender Micromaxx
- Blender Midea
- Blender Moa
- Blender Montana
- Blender Morphy Richards
- Blender Moulinex
- Blender MPM
- Blender Nedis
- Blender Ninja
- Blender Nordmende
- Blender Nova
- Blender Novamatic
- Blender Novis
- Blender NutriBullet
- Blender Philco
- Blender Primo
- Blender Princess
- Blender Privileg
- Blender ProfiCook
- Blender Proline
- Blender Redmond
- Blender Renkforce
- Blender Ritter
- Blender Rommelsbacher
- Blender Rotel
- Blender Russell Hobbs
- Blender Sage
- Blender Salton
- Blender Santos
- Blender Sanyo
- Blender Saro
- Blender Saturn
- Blender Schneider
- Blender Sencor
- Blender Severin
- Blender Shark
- Blender Sharp
- Blender Silvercrest
- Blender Smeg
- Blender Sogo
- Blender Solac
- Blender Solis
- Blender Springlane
- Blender Steba
- Blender Studio
- Blender Sunbeam
- Blender SupportPlus
- Blender Swan
- Blender Taurus
- Blender Team
- Blender Telefunken
- Blender Tesco
- Blender Tevion
- Blender Thane
- Blender Thomas
- Blender Tomado
- Blender Tower
- Blender Trebs
- Blender Tristar
- Blender Turbotronic
- Blender Turmix
- Blender Ufesa
- Blender Vitamix
- Blender Vitek
- Blender Vivax
- Blender Waves
- Blender Weasy
- Blender Westinghouse
- Blender Wmf
- Blender Wolf
- Blender Xsquo
- Blender Zelmer
- Blender Jata
- Blender JML
- Blender Jocel
- Blender JTC
- Blender Juiceman
- Blender OK
- Blender Omega
- Blender OneConcept
- Blender Orion
- Blender Oster
- Blender Clas Ohlson
- Blender Arzum
- Blender Black And Decker
- Blender Camry
- Blender Caso
- Blender Clatronic
- Blender Concept
- Blender Continental Edison
- Blender Cuisinart
- Blender ECG
- Blender Elba
- Blender Gallet
- Blender Heinner
- Blender Imetec
- Blender Izzy
- Blender Khind
- Blender Mellerware
- Blender OBH Nordica
- Blender Optimum
- Blender Orbegozo
- Blender Profilo
- Blender Scarlett
- Blender Sinbo
- Blender Trisa
- Blender Vox
- Blender Wilfa
- Blender Champion
- Blender Monoprice
- Blender Catler
- Blender Drew & Cole
- Blender Nutrichef
- Blender AYA
- Blender Bella
- Blender Costway
- Blender Danby
- Blender King
- Blender Nevir
- Blender Svan
- Blender Ardes
- Blender Eldom
- Blender Grunkel
- Blender LĂŒmme
- Blender Premium
- Blender Coline
- Blender Haeger
- Blender Waring Commercial
- Blender Brentwood
- Blender Chefman
- Blender DCG
- Blender Pyrex
- Blender Witt
- Blender Royal Catering
- Blender Apuro
- Blender Day
- Blender Zephir
- Blender Lenoxx
- Blender Riviera And Bar
- Blender Cosori
- Blender Baby Brezza
- Blender G21
- Blender Aurora
- Blender BORK
- Blender Orava
- Blender Signature
- Blender Dash
- Blender Cecotec
- Blender Prixton
- Blender Flama
- Blender Nesco
- Blender RGV
- Blender Comelec
- Blender Dynamic
- Blender Bar Maid
- Blender Ursus Trotter
- Blender Noveen
- Blender CRUX
- Blender AENO
- Blender Nutri Ninja
- Blender Ćucznik
- Blender Emeril Lagasse
- Blender PowerXL
- Blender Globe
- Blender Beautiful
- Blender Tribest
- Blender Usha
- Blender Vitinni
- Blender Zwilling
- Blender Sam Cook
- Blender Zeegma
- Blender WestBend
- Blender Just Perfecto
- Blender Focus Electrics
- Blender Petra Electric
- Blender AvaMix
- Blender Robot Coupe
- Blender Inno-Hit
- Blender Jarden
- Blender JIMMY
- Blender Semak
- Blender Create
- Blender Girmi
- Blender BioChef
- Blender Power Air Fryer XL
- Blender Luvele
- Blender Back To Basics
- Blender Proappliances
- Blender Electroline
- Blender Imarflex
- Blender Mystery
Nieuwste handleidingen voor Blender
11 December 2024
11 December 2024
11 December 2024
10 December 2024
9 December 2024
9 December 2024
8 December 2024
8 December 2024
7 December 2024
5 December 2024