Golden Lighting Torbellino 8106-6 CDB Handleiding

Golden Lighting Lamp Torbellino 8106-6 CDB

Lees hieronder de 📖 handleiding in het Nederlandse voor Golden Lighting Torbellino 8106-6 CDB (3 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Canopy 1ea Mounting

Screws 2ea Top loop 1ea

Chain 6ft Threaded ring 1ea Wire connectors 2ea

Chain connector 2ea Canopy loop 1ea Nipple 1ea

Mounting Strap 1ea Hex Nut 1ea Finial 1ea

Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad nish)

Comments

F A IIXTURE SSEMBLY NSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

NOTE: INSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

1. Feed the xture wires through the Top loop (J)

and pull the wires until taut.

2.Then screw the Top Loop (J) to the top of Frame

(K) until tight.

8106-6 CDB

Read and review installation instruction sheet before

assembling the xture.

Fig 1

Notice: Please review the parts listing and check for all parts before assembling the xture. If any parts are

missing or damaged, please note onthis sheet and contact the place of purchase to arrange for

replacement parts.

PARTS LIST Company Name:_______________________Co. Account #:_____________

to be lled out by retailer

PARTS & ASSEMBLY SHEET

This xture assembled PO:__________ Date: ________

Fixture Name: Torbellino 8106-6 CDB

CHAIN

For Customer Service, contact the place of purchase to arrange for replacement parts.

8. By measuring determine correct number of links

needed for proper hanging height. Use a pair of

pliers to open one link of the Chain (C2) then

remove the excess Chain (C2) and discard it.

9. Use one chain connector(E2) to attach one end

of the chain to the Top loop (D2) and close the

chain connector.

10. Feed the xture wires through the Chain (every

three links) and pull the wires until taut.

11. Slip Canopy loop collar (B2) over the chain,

then do the same with the canopy (F2).

12. When ready to complete the installation Use the

other chain connector and attach the other end of

the chain to the canopy loop (A2) and close the

chain connector.

13. Make sure the weight of the chandelier is

supported by the chain-not the electrical wire.

* You may now install the xture.

Fig 3

3. Unscrew four of the Deco screws (L) from the

Frame (K) and save.

4. Two arms are already attached to the Frame.

Gently spread the remaining four arms until evenly

spaced.

5. Align the hole in lower side of Frame arm (K) with

hole Frame(K). Secure in place with the Deco

screw (L).

6. Repeat with remaining arms and Deco screws.

* NOTE: The Finial can be scratched or broken if

the full weight of the xture is placed on it. To avoid

damage attach Finial after hanging the xture.

7. Attach Finial (N) to the base of xture Frame (K)

by threading the Finia l(N) onto the threaded rod

(M) until tight.

Fig 2

PARTS & ASSEMBLY SHEET

Fixture Name: Torbellino 8106-6 CDB

Note: Complete these remaining steps after the

xture is hung.

14. Place the Glass Shade (P) over the Threaded

Socket (O),place the Socket washer (Q) over the

threaded socket (O) then secure the Glass Shade

(P) by threading by the Socket Ring (R) until tight.

15. Install the light bulbs in accordance with the

xture's specications.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING)

Fig 4

INSTALLATION INSTRUCTIONS

Fixture Name: Torbellino 8106-6 CDB

For Chandelier Light Fixture

13. Raise Canopy (G) to the ceiling and secure in place by

tightening the Canopy loop collar(H) into the Canopy Loop(F)

14. Install the light bulbs and glass shade as per the xture

assembly sheet.

YOUR INSTALLATION IS NOW COMPLETE.

RETURN POWER TO THE JUNCTION BOX

AND TEST THE FIXTURE.

For Customer Service, contact the place of purchase to arrange for replacement parts.

7. Unscrew the Canopy loop collar (H) from the Canopy loop.

Take the canopy and pass over the Canopy loop. approximatly

one half of the canopy loop exterior threads should be exposed.

Adjust until desired height is reached. *the Canopy loop collar

should t snugly on the Canopy loop after the canopy is

installed. Remove Canopy and Canopy lock collar.

8. Assemble the xture and have an assistant or secure support

hold the weight of the xture while you complete the wiring

connections.

9.Thread the xture wires and ground wire of the assembled

xture through the canopy loop and nipple and into the outlet

box.

WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.

HANGING THE FIXTURE (Fig.1)

1. Carefully remove the new xture from the carton and the

yellow bag that holds all parts. Check that all parts are included

as shown in the illustration and parts list.

2. Shut o the power at the circuit breaker and remove old

xture from ceiling, including the old mounting strap.

3. Thread Nipple(C) into Canopy Loop (F) until snug.

4. Thread other end of the Nipple (C) with Canopy Loop

attached into Mounting Strap (D).

5. Place Lock Washer (B) over end of Nipple (C) protruding

through Mounting Strap (D) and thread Hex Nuts (A) onto Nipple

until tight.

6. Take this mounting strap assembly and mount to ceiling

junction box with junction box Screws (E). Tighten screw

securely with screw driver.

Fig. 1

CONNECTING THE WIRES (Fig 2)

10. Attach the power supply wires to the xture lead wires by

connecting BLACK to BLACK (or SMOOTH) and WHITE to

WHITE (or RIBBED).

11. Attach the GROUND wire(GREEN or COPPER) from the

Junction Box and the xture Ground wire to the green Ground

Screw on the Mounting Bracket (D) or connect both wires

together using the correct size of wire connectors. - NOTE:

Twist the wires together in the same direction you twist the wire

connector onto the wires.

12. Tuck these wire connections neatly into the Junction Box.

Fig. 2

CHAIN

JUNCTION BOX

(CEILING)

Product specificaties

Merk:	Golden Lighting
Categorie:	Lamp
Model:	Torbellino 8106-6 CDB

Heb je hulp nodig?

Als je hulp nodig hebt met Golden Lighting Torbellino 8106-6 CDB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Lamp Golden Lighting

Golden Lighting Torbellino 8106-9 CDB Handleiding

4 September 2024

Golden Lighting Heartwood 8063-15L BUS Handleiding

4 September 2024

Golden Lighting Torbellino 8106-D5 CDB Handleiding

4 September 2024

Golden Lighting Torbellino 8106-6 CDB Handleiding

4 September 2024

Golden Lighting Torbellino 8106-10 CDB Handleiding

4 September 2024

Golden Lighting Carver 0305-LP CH-CLR Handleiding

4 September 2024

Handleiding Lamp

Nieuwste handleidingen voor Lamp

NUVO Harlow 60/4630 Handleiding

11 September 2024

NUVO Laguna 60/5925 Handleiding

11 September 2024

NUVO Ballerina 60/181 Handleiding

11 September 2024

NUVO Ballerina 60/188 Handleiding

11 September 2024

NUVO Gemini 60/4759 Handleiding

11 September 2024

NUVO Fusion 60/4689 Handleiding

11 September 2024

Sonneman Nebula 2067.25 Handleiding

11 September 2024

Sonneman Stix 2789.16 Handleiding

11 September 2024

Elgato Key Light Neo Handleiding

11 September 2024

IKEA STRÅLA 905.431.92 Handleiding

6 September 2024