GoDEX EZ2350i Handleiding

GoDEX Labelprinter EZ2350i

Lees hieronder de 📖 handleiding in het Nederlandse voor GoDEX EZ2350i (23 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/23

EZ2250i/EZ2350i BARCODE PRINTER

USER MANUAL

User Manual

Version

Issue Date

P/N

: EZ2250i series

: Rev. E

: 2013.11.28

: 920-014611-00

Contents

EZ2250i/EZ2350i USER MANUAL

CONTENTS

. BOX CONTENT ............................................................................

1.1 Box Content ...............................................................................................................

1.2 Getting to Know Your Printer ..................................................................................

. PRINTER SETUP .............................................................................

2-1. Loading the label roll ...................................................................................................

2-2. Loading the ribbon.......................................................................................................

2-3. Connecting the printer to the host computer ..........................................................

2.4 Installing Printer Driver and GoLabel with Super Wizard CD ................................

. PRINTER SETTING AND CONTROL ............................................. 1

3-1. Operation Panel ......................................................................................................... 14

3-2. LCD Interface Introduction ....................................................................................... 15

3-3 LAN Setting ................................................................................................................... 20

3-4 LCD Password .............................................................................................................. 22

3-5. LCD Interface Function .............................................................................................. 24

3-6. Label Calibration and Self Test ................................................................................. 28

3-7. Dump mode ................................................................................................................ 30

3-8. Error Alerts .................................................................................................................... 31

3-9. USB Host ....................................................................................................................... 33

. NETSETTING FOR ETHERNET ....................................................... 3

4-1. Installing the NetSetting software ............................................................................. 35

4-2. The Interface of NetSetting ....................................................................................... 36

. ACCESSORIES ........................................................................... 4

5-1. Internal rewinder ......................................................................................................... 43

5-2. Installing the rewinder guide ..................................................................................... 45

5-3. Label dispenser ........................................................................................................... 46

5-4. Installing the cutter ..................................................................................................... 48

5-5. Installing the Parallel adapter ................................................................................... 50

. MAINTENANCE AND ADJUSTMENT .......................................... 5

6-1. Installing / removing the print head module .......................................................... 52

6-2. Adjusting the print line ............................................................................................... 53

6-3. Adjusting the ribbon tension ..................................................................................... 54

6-4. Cleaning the thermal print head ............................................................................. 55

6-5. Adjusting the balance and print head tension ...................................................... 56

6-6. Ribbon shield settings ................................................................................................. 57

6-7. Cutter settings ............................................................................................................. 58

6-8. Troubleshooting .......................................................................................................... 59

PPENDIX

EZ2250i/EZ2350i USER MANUAL

FCC COMPLIANCE STATEMENT

FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for a CLASS A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at own expense.

EMS AND EMI COMPLIANCE STATEMENT

FOR EUROPEAN USERS

This equipment has been tested and passed with the requirements relating to electromagnetic

compatibility based on the standards EN 55022:2010 Class A, EN61000-3-2:2006/ A1:2009/A2:2009,

EN 61000-3-3:2008 and EN 55024:2010, IEC 61000-4-2:2008 series The equipment also tested and

passed in accordance with the European Standard EN55022 for theboth Radiated and

Conducted emissions limits.

EZ2250i SERIES

TO WHICH THIS DECLARATION RELATES

IS IN CONFORMITY WITH THE FOLLOWING STANDARDS

IEC 60950-1:2005(2nd Edition)+Am 1:2009, GB4943-2001 GB9254-2008(Class A) GB17625.1-2003,

EN 55022:2010 Class A, EN61000-3-2:2006/ A1:2009/A2:2009, EN 61000-3-3:2008 and EN 55024:2010,

IEC 61000-4-2:2008 series, CAN/CSA C22.2 No. 60950-1-03, date July, 2006, UL 60950-1, 1st Edition,

2007-10-31, CFR 47, Part 15

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference

in which case the user may be required to take adequate measures.

此为Class A产品，在生活环境中，该产品可能造成无线电干扰，在这种情况下，可能需要用户对其干扰采取切实可行

的措施。

Decleration

Product specificaties

Merk:	GoDEX
Categorie:	Labelprinter
Model:	EZ2350i
Kleur van het product:	Zwart
Gewicht:	15000 g
Breedte:	274 mm
Diepte:	512 mm
Hoogte:	291 mm
Kleur:	Nee
Beeldscherm:	LCD
USB-poort:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	1
Certificering:	CE (EMC), FCC Class A, CB, cUL, CCC
Intern geheugen:	16 MB
RS-232 port:	1
Type processor:	32 Bit RISC CPU
Ondersteunt Windows:	Windows 2000, Windows 7 Home Basic, Windows 8, Windows Vista Home Basic, Windows XP Home
Temperatuur bij opslag:	-20 - 50 °C
Luchtvochtigheid bij opslag:	10 - 90 procent
Flash memory:	8 MB
Maximale resolutie:	300 x 300 DPI
Mediadikte:	0.06 - 0.25 mm
Maximum roll diameter:	203.2 mm
Printtechnologie:	Direct thermisch/Thermische overdracht
Ondersteunde server operating systems:	Windows Server 2003, Windows Server 2008
Ingebouwde streepjescodes:	1D, 2D, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN128, EAN13, EAN8, GS1 DataBar, MaxiCode, Micro QR Code, PDF417, POSTNET, QR Code
Maximale print breedte:	104 mm
Printsnelheid (metrisch):	127 mm/sec
Maximale print hoogte:	1143 mm
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	30 - 85 procent
Core diameter:	76.2 mm
Lint-wijdte:	110 mm
Lint-lente:	450 m
Windows code paginas ondersteund:	1250, 1251, 1252, 1253, 1254, 1255,1257