GoDEX DT2x Handleiding

GoDEX Labelprinter DT2x

Lees hieronder de 📖 handleiding in het Nederlandse voor GoDEX DT2x (40 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

DT SERIES USER MANUAL

USER MANUAL

VERSION

ISSUE DATE

P/N

: DT series

: Rev. 9G.

: 2022.02. 23

: 920-014211- 00

DT series User Manual

FCC COMPLIANCE STATEMENT

FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for a CLASS A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at own expense.

EMS AND EMI COMPLIANCE STATEMENT

FOR EUROPEAN USERS

This equipment has been tested and passed with the requirements relating to

electromagnetic compatibility based on the standards EN55022:2010 Class A, EN61000-

3-2:006/A2:2009, EN61000-3-3:2008 and EN55024:1998/A1:2001/A2:2003, IEC 61000-4-

2:2008 series, e equipment also tested and passed in accordance with the European Th

Standard EN55022 for the both Radiated and Conducted emissions limits.

DT SERIES

TO WHICH THIS DECLARATION RELATES

IS IN CONFORMITY WITH THE FOLLOWING STANDARDS

IEC 62368- IEC 60950-1:2005(2nd Edition)+Am 1:2009, GB9254-2008 (Class A ) ; 1:2014,

GB17625. 1-2003; GB4943.1-2011, EN55022:2010 Class A, EN61000-3-2:006/A2:2009,

EN61000-3-3:2008 and EN55024:1998/A1:2001/A2:2003, IEC 61000-4-2:2008 series, UL

60950 03 10-1,2nd Edtion,2007- -27, UL 60950-1,1st Edition,2007- -31, CSA C22.2 No.60950-1-

07,2nd Edition, 2007-03, CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07, CFR 47, Part 15

WARNING

This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

此为产品，在生活环境中，该产品可能造成无线电干扰，在这种情况下，Class A

可能需要用户对其干扰采取切实可行的措施。

DT series User Manual

Safety instructions

Please read the following instructions carefully.

1. Keep the equipment away from humidity.

2. Before you connect the equipment to the power outlet, please check the voltage of the

power source.

3. Make sure the printer is o before plugging the power connector into the power jack.

4. It is recommended that you connect the printer to a surge protector to prevent

possible transient overvoltage damage.

5. Be careful not to get liquid on the equipment to avoid electrical shock.

6. For safety and warranty reasons, ONLY qualied service personnel should open the

equipment.

7. Do not repair or adjust energized equipment under any circumstances.

CAUTION

Danger of explosion if battery is incorrectly replaced

Replace only with the equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

Only use with power supply adapter model: WDS060240P (9A).

Changes or modications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

Specications are subject to change without notice.

Product specificaties

Merk:	GoDEX
Categorie:	Labelprinter
Model:	DT2x
Kleur van het product:	Zwart
Gewicht:	1070 g
Breedte:	100 mm
Diepte:	218 mm
Hoogte:	172 mm
USB-poort:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	1
RS-232 port:	1
Ondersteund beeldformaat:	BMP, PCX
Type processor:	Ja
Temperatuur bij opslag:	-20 - 50 °C
Luchtvochtigheid bij opslag:	10 - 90 procent
Printsnelheid:	7 lpm
Flash memory:	4 MB
Maximale resolutie:	203 x 203 DPI
Printkleuren:	Zwart
Mediadikte:	0.076 - 0.2 mm
Maximum roll diameter:	127 mm
Printtechnologie:	Direct thermisch
Paginabeschrijving talen:	EZPL, GDPL, GEPL, GZPL
Maximale printafmetingen:	54 x 1727 mm
Ingebouwde streepjescodes:	1D, 2D, Code 93, Code-128 Codabar Library
Maximale print breedte:	54 mm
Printsnelheid (metrisch):	177 mm/sec
Maximale print hoogte:	1727 mm
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	30 - 85 procent
Verticaal printen:	Ja
Minimale printlengte:	4 mm
Bitmap fonts:	OCR-A, OCR-B
Tekststijl:	Bold, Italic, Underline
Roterend printen:	Ja