GoDEX EZ1305 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor GoDEX EZ1305 (27 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/27
EZ1105 1305 / EZ BARCODE PRINTER
USER MANUAL
USER MANUAL
VERSION
ISSUE DATE
P/N
: EZ 1105 / EZ1305
C : Rev.
: 2013.07.09
: 920- 3 -02 01 611
EZ1105 / EZ1305 User Manual
FCC COMPLIANCE STATEMENT
FOR AMERICAN USERS
This equipment has been tested and found to comply with the limits for a CLASS A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at own expense.
EMS AND EMI COMPLIANCE STATEMENT
FOR EUROPEAN USERS
This equipment has been tested and passed with the requirements relating to
electromagnetic compatibility based on the standards EN 55022:2006/A1:2007, IEC
61000-4- , 2:2001 ED. 1.2 The equipment has also been tested and passed in accordance
with the European Standard EN55022 for the both Radiated and Conducted emissions
limits.
EZ1105 / EZ1305
TO WHICH THIS DECLARATION RELATES
IS IN CONFORMITY WITH THE FOLLOWING STANDARDS
IEC 60950-1:2005(Second Edition)+Am 1:2009, GB9254-2008 (Class A ) ; GB17625. 1-2003;
GB4943.1-2011, EN 55022:2006/A1:2007, IEC 61000-4-2:2001 ED. 1.2 , CFR 47, Part 15
WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
此为 产品,在生活环境中,该产品可能造成无线电干扰,在这种情况下,可能需要用户对Class A
其干扰采取切实可行的措施。
EZ1105 / EZ1305 User Manual
Safety instructions
Please read the following instructions carefully.
1. Keep the equipment away from humidity.
2. Before you connect the equipment to the power outlet, please check the
voltage of the power source.
3. Make sure the printer is off before plugging the power connector into the
power jack.
4. It is recommended that you connect the printer to a surge protector to prevent
possible transient overvoltage damage.
5. Be careful not to get liquid on the equipment to avoid electrical shock.
6. For safety and warranty reasons, ONLY qualified service personnel should open
the equipment.
7. Do not repair or adjust energized equipment under any circumstances.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Only use with power supply adapter model: WDS060240 (7A).
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Specifications are subject to change without notice.


Product specificaties

Merk: GoDEX
Categorie: Labelprinter
Model: EZ1305

Heb je hulp nodig?

Als je hulp nodig hebt met GoDEX EZ1305 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Labelprinter GoDEX

Handleiding Labelprinter

Nieuwste handleidingen voor Labelprinter