Getac VR-X20 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Getac VR-X20 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
1
1
. Unpacking
VR-X20 DVR System
Terminal connector for
DC IN*
Terminal connector for
GPIO x 2
Mounting kit (bracket x 1
and screw x 4)
Fuse tap (ignition) -5A
15A inline fuse
* Use wire ferrules (not supplied) with the terminal
connector for DC IN.
Wire ferrule example:
VR-X20 DVR System
QUICK START GUIDE
GETAC VIDEO SOLUTION
2
2
. Identifying Components
Front Panel
No. Name Description
HDD LED Green light: HDD activity
Recording LED Blue light: Video recording in progress
Power button Press to power on VR-X20.
Power LED Red light (for 10 seconds): DC power-in
Green light: Software ready
Side Panel
No. Name Description
Dual SIM card tray To insert a SIM card, remove two screws, slide out the
SIM card tray, and put the SIM card in the matching
compartment.
SIM 1 SIM 2
3
Rear Panel
No. Name Description
PoE ports To connect up to two IP cameras. The PoE ports support
802.3af standard.
RJ45 connector To provide 10/100/1000 base-T Ethernet connection.
RJ45-type audio in
connectors
To connect up to two wireless microphones.
Wireless microphone model: WM-T2400M
DC-in connector To connect to vehicle ignition and battery. (See “DC-in
Connector Pin Assignments” on page 4 for wiring
information.)
GPIO port To provide additional control lines. There are 20 GPIO
pins in two groups of 10 pins. (See “GPIO Connector Pin
Assignments” on page 4 for wiring information.)
LTE antenna
connectors
Auxiliary and Main to connect external LTE antennas.
Installation must be performed by licensed
professionals.
The LTE option depends on the model purchased.
GPS antenna
connector
To connect an external GPS antenna.
Wi-Fi/BT antenna
connectors
Auxiliary and Main to connect external Wi-Fi/BT
antennas.
Combo audio
connector
To connect a headset microphone.
USB 2.0 connector To connect USB devices.
USB 3.0 connector To connect USB devices.
Control unit
connector
To connect to the CU-D50 control unit. (CU-D50 is an
optional item.)


Product specificaties

Merk: Getac
Categorie: Niet gecategoriseerd
Model: VR-X20

Heb je hulp nodig?

Als je hulp nodig hebt met Getac VR-X20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Getac

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd