Genie 250CD Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Genie 250CD (50 pagina's) in de categorie Papiervernietiger. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/50
302-604
Indoor Comfort Level Station
Quick setup manual
Introduction
The Indoor Comfort Level Station is an ideal measuring instrument
for checking room ambient conditions.
Checking indoor temperature and humidity can help achieve a
comfortable and healthy living environment and may even save
you heating costs.
Features:
Digital time
Indoor temperature (°F or °C)
Indoor relative humidity (%RH)
Minimum and Maximum temperature and humidity
records.
Comfort level icon (smiley face) for humidity levels
between 40% - 60%RH.
Display large temperature or large humidity with the
touch of a button.
Wall hanging or free standing.
Temperature range: -4° F to 122° F (-20° C to 50° C).
“Lo” icon when temperature is below -4°F (-20°).
Humidity range 20% to 99% RH.
CR 2032 button cell battery included.
Set up:
Remove the stand (E) from the back of the station by
carefully pulling it downwards.
Open the battery compartment (F) by turning the lid with
a coin counter clockwise.
Remove the insulation strip from the battery.
Close the battery compartment again.
All LCD segments will light up for about a few seconds.
The unit is now ready to use.
The upper display shows the time and the comfort level,
the middle display shows the current temperature and
the lower display the relative humidity
Buttons:
A: SET button
B: SWITCH button
C: MAX/MIN button
Housing:
D: Wall mounting hole
E: Removable stand
F: Battery compartment
Display with removable stand.
Set Time:
Press and hold SET button for 3 seconds, to enter the time set
mode.
HOUR: The Hour digit is flashing. Press and release the
SWITCH button to adjust the Hours. Be sure to AM or
PM is showing as appropriate.
MINUTES: Press and release the SET button again the
Minutes digit is flashing. Press and release the SWITCH
button to adjust the minutes. Hold the SWITCH button to
change the Minutes quickly.
CONFIRM: Press and release the SET button to confirm
the time and return to a normal display.
Fahrenheit or Celsius:
Press and release the SET button to change between
°C (Celsius) or °F (Fahrenheit) as temperature
unit in normal mode.
NOTE: With Fahrenheit as temperature unit, the clock
automatically switches to the 12 HR system (PM
appears on the display after noon).
Comfort Level Icon:
When the humidity is between 40% and 60% a smiling
face icon will display in the upper right corner of the
station to indicate the comfort level of indoor climate.
MAX/MIN Values:
VIEW: Press and release the MAX/MIN button. MAX
appears on the display. The maximum temperature and
humidity are displayed. Press and release the MAX/MIN
button again. MIN appears on the display. The minimum
temperature and humidity are displayed. Press
MAX/MIN button again to return to normal mode.
RESET: Press and release the MAX/MIN button to show
MAX or MIN. Hold the SET button in the respective
mode to clear the recorded MAX/MIN reading. The
temperature and humidity will appear as: --.- °F and --.-
% on the display.
Display options:
Press and release the SWITCH button, to choose
between the large-scale display of temperature or
humidity.
12 13
Positioning and mounting:
With the removable stand the instrument can be placed
onto any flat surface or wall mounted at the desired
location by the wall mounting hole at the back of the
unit.
Battery replacement:
Change the battery CR 2032 button cell when the battery symbol
appears on the display
Remove the stand (E) from the back of the station by
carefully pulling it downwards.
Open the battery compartment (F) by turning the lid with
a coin counter clockwise.
Remove the old battery and install a fresh CR 2032
battery. Observe correct polarity (+ facing up).
Close the battery compartment again.
Low batteries should be changed soon to avoid the damage
resulting from a leaking battery.
Attention:
If you notice that the LCD appears faint or is not working properly,
try a fresh battery before contacting customer support.
We recommend that you replace the batteries in all units regularly
to ensure optimum accuracy of this unit.
Help us to keep our environment clean. Please do not dispose of
old electronic devices and empty batteries in household waste. To
protect the environment, take them to your retail store or to
appropriate collection sites according to national or local
regulations.
Maintenance:
Keep the instrument in a dry place.
Do not expose the instrument to extreme temperatures,
vibration or shock.
Clean it with a soft damp cloth. Do not use solvents or
scouring agents.
If the unit does not work properly, change the battery.
Intended usage, safety information:
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for
public information, but is determined for home use only.
The specifications of this product may change without
prior notice.
Improper use or unauthorized opening of housing will
void the warranty.
Specifications
Temperature range: -4°F….122°F (-20°C…50°C)
Precision: 32°F…+104°F ± 2°F, otherwise 3°F
Resolution: 0.1°F
Measuring range humidity: 20%...99%
Accuracy: 35%...75% ±4%
“Lo“: = temperature is lower than -4°F
Battery: CR 2032 button cell battery
Product size: 4.125” L x 1.625” W x 4.125” H
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on
this product against manufacturing defects in materials and
workmanship.
This limited warranty begins on the original date of purchase, is
valid only on products purchased and used in North America and
only to the original purchaser of this product. To receive warranty
service, the purchaser must contact La Crosse Technology, Ltd for
problem determination and service procedures. Warranty service
can only be performed by a La Crosse Technology, Ltd authorized
service center. The original dated bill of sale must be presented
upon request as proof of purchase to La Crosse Technology, Ltd
or La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at
our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during the
limited warranty period specified above. All replaced parts and
products become the property of La Crosse Technology, Ltd and
must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer. La Crosse
Technology, Ltd will pay all expenses for labor and materials for all
repairs covered by this warranty. If necessary repairs are not
covered by this warranty, or if a product is examined which is not
in need or repair, you will be charged for the repairs or
examination.
The owner must pay any shipping charges incurred in getting your
La Crosse Technology, Ltd product to a La Crosse Technology,
Ltd authorized service center.
Your La Crosse Technology, Ltd warranty covers all defects in
material and workmanship with the following specified exceptions:
(1) damage caused by accident, unreasonable use or neglect
(including the lack of reasonable and necessary maintenance); (2)
damage occurring during shipment (claims must be presented to
the carrier); (3) damage to, or deterioration of, any accessory or
decorative surface; (4) damage resulting from failure to follow
instructions contained in your owner’s manual; (5) damage
resulting from the performance of repairs or alterations by
someone other than an authorized La Crosse Technology, Ltd
authorized service center; (6) units used for other than home use
(7) applications and uses that this product was not intended or (8)
the products inability to receive a signal due to any source of
interference.
This warranty covers only actual defects within the product itself,
and does not cover the cost of installation or removal from a fixed
installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting
from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME
LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR
OTHER SIMILAR DAMAGES ASSOCIATED WITH THE
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS
PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES
OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A
TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have
other rights specific to your State. Some States do no allow the
exclusion of consequential or incidental damages therefore the
above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology
2817 Losey Blvd. S.
La Crosse, WI 54601
The instruction manual is available at:
www.lacrossetechnology.com/support
Le manuel d'instruction est disponible sur:
www.lacrossetechnology.com/support
El manual de instrucciones está disponible en:
www.lacrossetechnology.com/support
All rights reserved. This handbook must not be reproduced in any
form, even in excerpts, or duplicated or processed using
electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and corrections
made in the next issue. We accept no liability for technical
mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
Printed in China


Product specificaties

Merk: Genie
Categorie: Papiervernietiger
Model: 250CD

Heb je hulp nodig?

Als je hulp nodig hebt met Genie 250CD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Papiervernietiger Genie

Handleiding Papiervernietiger

Nieuwste handleidingen voor Papiervernietiger