Insignia NS-S10CCBK Handleiding
Insignia
Papiervernietiger
NS-S10CCBK
Lees hieronder de 📖 handleiding in het Nederlandse voor Insignia NS-S10CCBK (2 pagina's) in de categorie Papiervernietiger. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Overheat Door open
PowerOverload
FWD REV
OFFAUTO
Switch
LED indicators
SETTING UP YOUR SHREDDER
1 Place the wastebasket upright on a level surface.
2 Attach the shredder head to the basket. Make sure that it
ts properly.
3 Place the wastebasket securely in the shredder.
Note: Do not use plastic bags to line the wastebasket.
4 Connect the power cord to a power outlet. Do not use an
extension cord.
USING YOUR SHREDDER
1 Unpack your shredder, then place it upright on a level
surface.
2 Make sure that the shredder head is correctly tted onto
the basket.
3 Plug the power cord into a standard (120 V AC) outlet. Do
not use an extension cord.
4 Slide the power switch to AUTO.
5 Insert paper (up to 10 pages) or one credit card or disc into
the shredding slot. Your shredder automatically shreds
what you insert.
Note: Don’t put envelopes, adhesive material, newsprint,
transparencies, laminated documents, continuous forms,
cardboard, or hard and plastic materials (except credit cards)
through the shredder. You can shred small staples and small
paper clips.
6 If the shredder jams, slide the switch to REV to return the
paper, then slide the switch to . The shredder can be AUTO
used again if the jam is cleared.
7 When the wastebasket is 2/3 full, slide the switch to OFF,
unplug the cord from the power outlet, then lift up and
empty the wastebasket.
PACKAGE CONTENTS
• Cross cut shredder with wastebasket
• Quick Setup Guide
FEATURES
• Shreds up to 10 sheets of paper at one time
• Destroys credit cards, compact discs, small staples, and
small paper clips
• Cross-cut size .2 × 1.4 in. (4 × 35 mm) protects sensitive
data
• 5.6 gal (21 L) capacity basket holds shredded waste and is
easy to empty
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
10-sheet Cross Cut
Shredder
NS-S10CCBK / NS-S10CCBK-C
# ITEM
1 Handle
2 Switch
3 LED
indicators
4 Shredding
slot
5 Window
6 Wastebasket
DESCRIPTION
Lets you easily lift up the shredder head
to empty the paper inside the waste
basket. Make sure that your shredder is
turned o before you move it.
FWD: Sends an item through your
shredder. The POWER indicator lights
green.
Note: When you slide the power switch to
FWD, the cutters run forward continuously.
To stop the cutters, you have to move the
switch to a dierent position.
We recommend that you only use FWD to
make sure that the remaining paper in slot
gets shredded or you want you clear the slot.
AUTO: Automatically shreds an item
when inserted into the shredding slot.
The POWER indicator lights green. After
shredding, the shredding stops
automatically.
OFF: Turns o your shredder.
REV: Reverses the paper in the slot to
clear a jam or remove unshredded paper.
Overheat: Lights when your shredder
has overheated. If this indicator is on, the
machine stops shredding, and recovers
when the indicator is o. The cool down
time is at least 30 minutes.
Overload: Lights when trying to shred
over the maximum 10 sheets or when
the paper is folded. In overload, the
cutter turns o automatically.
Power: Lights when your shredder is in
use.
Door open: Lights when the shredder
head is not on the wastebasket or when
the head is not in the correct position on
the wastebasket.
Insert up to 10 sheets of paper at a time
or one credit card or disc at a time.
Lets you see how much shredded
material is in the wastebasket.
Holds the paper, cards, and discs that
you have shredded. Empty the basket
when it is 2/3 full.
AUTO
REV
TROUBLESHOOTING
My shredder isn’t working
• Make sure that the power cord is plugged into a working power
outlet. If the power cord is damaged, replace it.
• Make sure that the shredder head and wastebasket are positioned
correctly.
• If the Overheat indicator is on, let it cool at least 30 minutes. When
the indicator is o, you can use your shredder again,
• Change the position of the paper as you insert it.
• The paper may be too thin or crumpled for your shredder to
recognize it. Fold the paper, then reinsert it.
• Slide the switch to FWD.
• Make sure that you only send 10 sheets of paper, one credit card,
or one disc through your shredder at a time.
My shredder is jammed
• Slide the switch to , remove the paper from the cutter, then REV
slide the switch to AUTO, and try again.
The cutter won’t stop
• Slide the switch to , unplug your shredder from the power OFF
outlet, then push the shredded paper down to make sure that it is
away from the shredder head.
• Slide the switch to REV to remove extra paper, disc, or credit card
from your shredder.
My shredder is too noisy
• Make sure that your shredder is on a at, level surface.
• Make sure that the shredder head and wastebasket are positioned
correctly.
The Overheat indicator is lit.
• Let your shredder cool at least 30 minutes. When the indicator
turns o, you can use your shredder again.
The Overload indicator is lit.
• Make sure that you haven’t put too much paper into your
shredder at one time. Slide the switch to REV, remove the paper
from the cutter, then try again with less paper.
SPECIFICATIONS
• Dimensions: 12.7 × 8.3 × 16.8 in.
(32.2 × 21.2 × 42.6 cm)
• Cutting style: Cross cut
• Entry width: 8.6 in. (22 cm)
• Shred capacity: 10 sheets (75 g/m2 A4 paper)
1 disc or credit card
• .2 × 1.4 in. (4 × 35 mm)Shred size:
• Shred speed: 3 m/1 min.
• Duty cycle: 3 mins ON / 30 mins OFF
• Input: AC 120 V, 60 Hz, 4.5 A
• Net weight: 12 lbs. (5.5 kg)
• Basket capacity: 5.6 gal (21 L)
LEGAL NOTICES
FCC statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
V2 ENGLISH 20-0106
IMPORTANT SAFETY INFORMATION
Please read thoroughly
Before using the shredder, please read the guide and become familiar with the safety
information, operating instructions, and maintenance requirements. Following all warnings
and instructions in the guide and as marked on the shredder. Do not attempt to service this unit
by yourself. Doing so will void the manufacturer’s warranty and may expose you to sharp
cutting blades and/or high voltage electric shock that could cause serious injury. Any repairs
must be performed by qualied service personnel.
11. Keep in the OFF position when the shredder is not in use for prolonged periods of time.
12. Empty wastebasket frequently.
13. The document shredder must always be deactivated and disconnected from the electrical
line prior to moving, transporting and cleaning the device and prior to emptying the waste
basket.
14. The device may not be operated with a damaged power cord.
15. For indoor use only.
16. To protect the machine well, we suggest the user to operate it in this way: work 3 minutes
then rest 30 minutes.
17. The machine allowed max shred 10 sheets paper (75gsm) or 1 credit card
or 1 CD at one time.
18. The socket-outlet must be installed near the equipment and must be easily accessible
during use.
1. Read
instructions
before use
3. Avoid
touching the
document feed
opening with
hands
5. Product is not
intended for use
by children
(product is not
toy)
4. Do not spray or keep any
aerosol products in or around
shredder
2. Avoid loose
clothing or
jewelry touching
the document
feed opening
7. Shredder
oil only
6. Avoid
getting hair
near the
document
feed opening
8. Sharp edges,
do not touch
9. This equipment is not
intended for use by children.
Avoid touching the media feed
opening with the hands,
clothing or hair. Unplug this
equipment when not in use of
an extended period of time.
10. Warning!
Before switching
the machine on,
make sure that
you observe all
safety
instructions
Product specificaties
| Merk: | Insignia |
| Categorie: | Papiervernietiger |
| Model: | NS-S10CCBK |
Heb je hulp nodig?
Als je hulp nodig hebt met Insignia NS-S10CCBK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Papiervernietiger Insignia
11 Maart 2025
8 Februari 2024
8 Februari 2024
8 Februari 2024
8 Februari 2024
Handleiding Papiervernietiger
- Papiervernietiger Honeywell
- Papiervernietiger Acco
- Papiervernietiger Amazon
- Papiervernietiger DESQ
- Papiervernietiger Digitus
- Papiervernietiger Duronic
- Papiervernietiger Ednet
- Papiervernietiger Fellowes
- Papiervernietiger GBC
- Papiervernietiger Hama
- Papiervernietiger Hema
- Papiervernietiger HSM
- Papiervernietiger Ideal
- Papiervernietiger Kensington
- Papiervernietiger Kogan
- Papiervernietiger Leitz
- Papiervernietiger Lervia
- Papiervernietiger Marquant
- Papiervernietiger Media-tech
- Papiervernietiger Monolith
- Papiervernietiger Nedis
- Papiervernietiger Primo
- Papiervernietiger Renkforce
- Papiervernietiger Royal Sovereign
- Papiervernietiger Sencor
- Papiervernietiger Suntec
- Papiervernietiger United Office
- Papiervernietiger Zipper
- Papiervernietiger Olympia
- Papiervernietiger Overmax
- Papiervernietiger Black And Decker
- Papiervernietiger Camry
- Papiervernietiger Exibel
- Papiervernietiger Conrad
- Papiervernietiger Tracer
- Papiervernietiger Deli
- Papiervernietiger Eldom
- Papiervernietiger Kobra
- Papiervernietiger Genie
- Papiervernietiger Aurora
- Papiervernietiger Q-CONNECT
- Papiervernietiger Swordfish
- Papiervernietiger Peach
- Papiervernietiger Rexel
- Papiervernietiger Acco-Rexel
- Papiervernietiger Bonsaii
- Papiervernietiger D-Mail
- Papiervernietiger Dahle
- Papiervernietiger OTTO
- Papiervernietiger Anova
- Papiervernietiger Brasq
- Papiervernietiger Qoltec
Nieuwste handleidingen voor Papiervernietiger
10 Februari 2025
24 Januari 2025
24 December 2024
6 December 2024
6 December 2024
5 December 2024
1 December 2024
17 November 2024
15 November 2024
15 November 2024