Digitus DA-81606 Handleiding

Digitus Papiervernietiger DA-81606

Lees hieronder de 📖 handleiding in het Nederlandse voor Digitus DA-81606 (3 pagina's) in de categorie Papiervernietiger. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Cross-Cut Shredder X5

Manual

DA-81606

Cautions

1. In case of any danger immediately switch off and unplug the shredder from the mains.

2. Keep children away from this machine. The design and safety concepts are based on adult

dimensions to ensure it can be safely operated by adults only.

3. Do not place hands or fingers into the shredder throat as serious injury could result.

4. Keep all loose articles of clothing, ties, jewelry, hair or other small items away from the feed

opening to prevent injury.

5. Remove all paper clips and staples from paper before shredding. Unit will cut staples, however

it is not recommended.

6. Do not immerse the shredder, power cord or plug in liquids. Keep aerosol sprays away from this

machine.

7. Continuous shredding of computer paper should not exceed 2 minutes. If continuous use is

required, it is recommend that the shredding time should be 2 minutes on, at least 60 minutes

off to allow for proper cooling of the motor.

8. The socket outlet shall be installed near the equipment and shall be easily accessible.

9. Always turn off or unplug the shredder prior to moving, cleaning or emptying the wastebasket.

10. The maximum number of sheets that can be shredded at any one time is 5 sheets of 80gsm paper.

Thicker paper should be shredder singly.

11. Empty wastebasket frequently.

S etup

1. Place the shredder securely on the top of the wastebasket.

2. Plug the power cord into any standard 230-240V

3. Place the Main Switch in the AUTO position

Operating the shredder

There are four operating modes:

1. When AUTO is selected, the shredding process is started automatically by inserting the paper

into the feed opening. The shredder will stop automatically when the paper has completed its

travel through the feed opening.

2. REV is used to assist in the removal of a paper jam, which reverses the shredding process prior

to a completed cycle, thus clearing the cutters.

3. OFF position is recommended when emptying the wastebasket or when the shredder is not in

use for a prolonged period of time.

4. Clear: In AUTO mode, press to clear jammed paper.

Shredder capacity

Cross-Cut Shredder X5 will shred 5 sheets at once and will accept paper widths up to . When 220mm

shredding small material like envelopes or credit card receipts, insert them through the middle of

the feed opening.

Paper jams and overloads protection

Cross-Cut Shredder X5 is equipped with a motor overload protection device, the normal short

time 2 60 shredding at maximum capacity is minutes on and at least minutes off. The power may

terminate automatically in case of the following abnormal situations:

1. Operating the shredder at the maximum capacity continuously for a prolonged period of time,

e.g. More than 2 minutes without stopping.

2. Exceeding the shredding capacity, e.g. Inserting more than 5 sheets at one pass, or if the paper is

not fed squarely into the feed opening.

Both abnormal operations may result in the activation of the automatic motor overload protection, which

terminates the power to the unit. If this occurs you should:

1. Unplug the power cord from the AC outlet and wait at least 60 minutes for the overload

protection to reset. Tear or cut off any excess paper from the top of the shredder.

2. Plug the power cord back into the AC outlet and place the Switch in REV. Pull the remaining paper

out of the cutters. Place the Switch back to the Auto position if necessary.

3. With the Switch in the AUTO position and the feed opening clear, you are now ready to resume

normal shredding.

Clearing the cutter heads

If fibrous paper is being shredded, the cutters may clog. Move the switch alternately between CLEAR

and REV 2- 3 times to clear any paper shreds attached to the cutters.

Specifications

Shred t ype : Cross Cut

Shred s ize : 4*40MM

Shredding capacity : 5 Sheets

Feed opening : 220MM

Input : 0- A 23 240 0.8V/50 Hz;

Shredder dimension : 3 85 15 (L) x 1 (W) x 410 (H)mm

Bin v 10L olume:

This equipment is not intended for use by children. Avoid touching the media feed opening with the

hands, clothing or hair. Unplug this equipment when not in use for an extended period of time,

Hazardous moving part is in this equipment, keep body parts away from

moving parts.

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content.

If the Declaration of Conformity is missing, you can request it by post under the below mentioned

manufacturer address.

www.assmann.com

ASSMANN Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Product specificaties

Merk:	Digitus
Categorie:	Papiervernietiger
Model:	DA-81606
Kleur van het product:	Zwart
Breedte:	315 mm
Diepte:	185 mm
Hoogte:	410 mm
Geluidsniveau:	74 dB
Land van herkomst:	China
ISO A-series afmetingen (A0...A9):	A4
Code geharmoniseerd systeem (HS):	84729080
Volume mand:	10 l
Werkbreedte:	220 mm
Vernietigt CD's:	Nee
Papier versnipperen:	Ja
Credit cards versnipperen:	Nee
Vernietigt tot grootte:	4 x 40 mm
Snijtype:	Dwarsversnippering
Capaciteit documentvernietiger:	5 vel
Soort vernietiger:	Kruisversnippering
Verwerkt nietjes:	Nee
Vewerkt paperclips:	Nee
Snelheid documentvernietiger:	2500 mm/min
Automatische aan/uit-functie:	Ja
Beveiligingsniveau (papier):	P-4