Digitus DA-81608 Handleiding

Digitus Papiervernietiger DA-81608

Lees hieronder de 📖 handleiding in het Nederlandse voor Digitus DA-81608 (5 pagina's) in de categorie Papiervernietiger. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Paper Shredder X10

Manual

DA-81608

This device is solely intended to shred/destroy a maximum of 10 (unstapled) sheets of paper

per operation. Any other use is deemed incorrect use and thus will invalidate the extended

warranty and endanger your safety. The device cannot shred laminated paper or plastic

sleeves and will be irreparably damaged if used in this way.

Safety precautions:

Warning:

• Read through these operating instructions before starting to use the device and keep them

safe for later consultation.

• To avoid injury, keep long and/or lightweight objects, such as clothing (scarves, ties, etc.),

jewellery (necklaces, bracelets, etc.) as well as long hair away from the opening where

paper is inserted.

• If the device is not going to be used for an extended period, switch it off entirely and

unplug the power socket.

• Do not insert hands or fingers into the input slot since this may cause serious injuries.

• Avoid all contact with liquids and do not spray any flammable liquids, compressed air or

gases into or onto the device as these could easily ignite.

• Unplug or switch off the device before moving, cleaning or emptying it.

• Immediately switch off the device in the event of damage or improper functioning and

unplug the power socket. Get the device checked by a specialist dealer or customer service.

• The device must not be operated using a damaged power cable.

• Empty the collecting container regularly.

• Do not leave the shredder unattended, especially if there are children or animals nearby.

The device is not a toy - ensure it is out of the reach of children and animals.

• The device is only suitable for use indoors.

• Keep the device as close as possible to the source of power in case of emergencies . If

possible, do not use an extension cable.

• This device was designed to shred paper up to DIN A4 size (80g/m²). Larger sheets of paper

must be folded or cut until they are A4-sized or smaller.

• To avoid overloading, ensure that you do not exceed the maximum number of sheets per

operation.

• Do not insert any plastic covers or metal strips into the cutting unit since such materials

may damage the blades.

• Remove all paper clips and staples before inserting the paper.

Placing the shredder:

1. Place the device on a smooth and flat surface.

2. Ensure the device is positioned in a distance from heaters or other sources of heat.

3. Where possible, avoid using extension cables or multi-way sockets. It is advisable to

connect the device directly to the wall socket using the power cable (in accordance with

the technical specifications).

4. Safely position the shredder above the paper basket while ensuring your fingers do not get

caught between the top of the paper basket and the shredder attachment.

5. Connect the mains plug to a conventional 220- 240 volt AC power socket.

Important notice: The device is fitted with a release mechanism which stops the device from

functioning if it is not being operated correctly with the paper basket provided. The unit must

be flush with the edge of the paper basket with the extensions locking into the device to

enable it to function. If this does not occur, re-position the device on the paper basket or place

it the other way around until you hear a faint click.

Operating the shredder:

A switch is located on the top of the device and can be set in three (3) positions.

1. AUTO position: the cutting process is automatically initiated as soon as paper, a CD/DVD or

credit card is inserted into the corresponding input slot. Please do not insert any CDs/DVDs

or credit cards into the input slot while shredding paper since the device is incapable of

shredding of paper at the same time as CDs/DVDs or credit cards. Once the chosen

material has fully passed through the cutting unit, the cutting process will stop

automatically.

2. REV is used to fix paper blockages. This changes the cutting direction before an operating

cycle has ended enabling the blades to be released. If you realise that you have

unintentionally inserted too much paper, and the shredding process becomes noticeably

slower, set the switch to this position.

3. The switch should be set to if you wish to empty the paper basket, or do not intend “ ” OFF

to use the device for an extended period. After doing so, unplug the device from the power

supply.

The device is only intended for personal use indoors and for a short operation period of a

maximum of 2 minutes. Do not use the shredder for commercial purposes or outdoors.

Product specificaties

Merk:	Digitus
Categorie:	Papiervernietiger
Model:	DA-81608
Kleur van het product:	Zwart
Breedte:	350 mm
Diepte:	220 mm
Hoogte:	440 mm
Geluidsniveau:	72 dB
Land van herkomst:	China
Kijkglas:	Ja
Reverse:	Ja
Handvat(en):	Ja
ISO A-series afmetingen (A0...A9):	A4
Code geharmoniseerd systeem (HS):	84729080
Volume mand:	21 l
Werkbreedte:	223 mm
Vernietigt CD's:	Ja
Papier versnipperen:	Ja
Credit cards versnipperen:	Ja
Vernietigt tot grootte:	5 x 18 mm
Snijtype:	Dwarsversnippering
Capaciteit documentvernietiger:	10 vel
Soort vernietiger:	Kruisversnippering
Verwerkt nietjes:	Nee
Vewerkt paperclips:	Nee
Snelheid documentvernietiger:	1600 mm/min
Beveiligingsniveau:	P-4
Automatische aan/uit-functie:	Ja