GE GXWH08C Handleiding
GE
Waterfilter
GXWH08C
Lees hieronder de 📖 handleiding in het Nederlandse voor GE GXWH08C (12 pagina's) in de categorie Waterfilter. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
REQUIRED TOOLS AND ACCESSORIES
FOR INSTALLATION
■
2 wrenches: 11⁄8″ and 11⁄4″
■
Pipe cutter or hacksaw
■
File
■
Emery paper
■
Screwdriver
■
For GXWH01C model, additional installation parts may
be required:
•(2) 3⁄4″compression adapters with brass ferrule and
nut for installation on copper plumbing –
Installation Kit available:
– Retail Part (WHKIT)
– GE Parts (WS35X10023)
•UL-approved grounding clamps and 8-gauge copper
grounding wire–Installation Kit available:
– Retail Part (WHKIT)
– GE Parts (WS35X10023)
•Teflon®Tape
•Sump Wrench
– Retail Part (UCWRNCH)
– GE Parts (WX5X140)
Optional accessories are available (Visa, MasterCard or Discover
cards accepted) by visiting our Website at www.GEAppliances.com
or from Parts and Accessories 800.626.2002 (U.S.) or
800.663.6060 (Canada).
■
If unit is to be installed on plastic, PVC, or galvanized
plumbing, separate hardware must be purchased.
CONTENTS INCLUDED WITH PRODUCT
■
Filter housing and head
■
Product literature
■
Sediment filter
(for GXWH08C)
■
(2)
3⁄4″
brass compression adapters with nut
and ferrule (for GXWH08C)
■
Teflon®tape (for GXWH08C)
■
Sump wrench (for GXWH08C)
■
Grounding clamps and wire (for GXWH08C)
1
GE Smar tWater ™
INSTALLATION INSTRUCTIONS
Household Water Filtration System — GXWH01C and GXWH08C
251B6021P001 10-01 JR 49-50043-3
www.GEAppliances.com
GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY 40225
SAFETY PRECAUTIONS
■
Check with your state and local public works
department for plumbing and sanitation codes.
You must follow these guidelines as you install
the Household Water Filtration System. Using
a qualified installer is recommended.
■
Be sure the water supply conforms with the Specifications
Guidelines. If the water supply conditions are unknown,
contact your municipal water company
.
WARNING: Do not use with water that is
microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system.
■
I
t is highly recommended that a water shut-off valve
be placed directly upstream of your household filter.
PROPER INSTALLATION
■Check with your local public works department for
plumbing codes. You must follow their guides as you
install the Household Water Filtration System.
■Use the Household Water Filtration System on a potable,
safe-to-drink, home COLD water supply only. The filter
cartridge will not purify water or make unsafe water safe
to drink. DO NOT use on HOT water (100˚F max).
■Protect the Household Water Filtration System and piping
from freezing. Water freezing in the system will damage it.
■Your Household Water Filtration System will withstand up to
125 psi water pressure. If your house water supply pressure
is higher than 100 psi during the day (it may reach higher
levels at night), install a pressure-reducing valve before the
system is installed.
■
Do not install on HOT WATER. The temperature of the
water supply to the Household Filtration System must
be between the minimum of 40
°F and the maximum
of
1
00°F
. See the Specification Guidelines
.
■Do not install the Household Water Filtration System
using copper solder fittings. The heat from the soldering
process will damage the unit.
WARNING: Discard all unused parts and packaging
material after installation. Small parts remaining after
installation could be a choke hazard.
■Do not install filter in an outside location or anywhere
it will be exposed to sunlight.
This Household Water Filtration System must be properly installed and located in accordance with the Installation Instructions before it is used.
System is
Tested and Certified by NSF
International against ANSI/NSF
Standard
42 for nominal Particulate Reduction
Class . III
System is
Tested and Certified by NSF
International against ANSI/NSF
Standard
42 for nominal Particulate Reduction
Class . III
GXWH01C GXWH08C
2
ABOUT THE FILTER CARTRIDGE
Filter Cartridge Replacement
You should change your filter when the water flow is noticeably reduced or at least every three months.
Filter Cartridge Life
Several variables determine how long
the cartridge will last in your Household
Water Filtration System. These include:
■
levels of sediment or other undesirable
substances in your water.
■
the amount of water you use.
■
the filter location (filtering all or part of your
household water).
GE MODEL FUNCTION LIFE CONSTRUCTION
FXUSC* Sediment 3 month/16,000 gallons Polyspun
15 Micron
FXWPC Sediment 3 month/16,000 gallons Pleated
FXWSC Sediment 3 month/16,000 gallons String Wound
10 Micron
FXWTC* Sediment 3 month/15,000 gallons Carbon Paper
5 Micron
Chlorine
*NSF Certification for particulate reduction applies only to the FXUSC and FXWTC when
used in GXWH01C or GXWH08C Filtration Systems.
Turn off water to filter. For model GXWH01C,
water must be shut off from an upstream
valve. For model GXWH08C, rotate bypass
valve to the bypass position.
Press the red pressure release button to release
pressure.
Unscrew the filter canister and discard used
filter. Wash the filter canister with mild soap
and water. Do not use harsh cleaners or hot
water.
Inspect the filter canister O-ring. Make sure it
is lightly lubricated and completely seated in
the groove. It is recommended that you
replace the O-ring if it is damaged.
Place a new filter cartridge into the canister
making sure it is centered and completely
seated on the bottom seal.
Reinstall the filter canister to the unit. Hand
tightening is all that is required to seal the
unit.
Slowly turn on water to the filter by using the
bypass valve (model GXWH08C) or the
upstream shut-off valve.
Press the red pressure release button to
remove trapped air.
Open any downstream faucet and allow filter
system to flush for 5 minutes.
9
8
7
6
5
4
3
2
1
Installation Overview
NOTE: Be sure to allow a minimum space of 11⁄2″
under the filter for removing the sump, to change
the cartridge.
Turn sump wrench tool
clockwise to remove
(on some models) Sump
Bypass valve
Filter
cartridge O-ring seal
Red pressure
release button
Head
Filter canister
Turn
clockwise
to remove
canister
Turn
counterclockwise
to tighten
Turn
clockwise
to remove
canister
Turn
counterclockwise
to tighten
Red pressure
release button
Filter
cartridge O-ring seal
Filter canister
Head
GXWH01C GXWH08C
Recommended
shut-off valve Recommended
shut-off valve
GXWH01C GXWH08C
Specification Guidelines
Minimum–Maximum Supply Water Pressure: 20–125 pounds per square inch (psi)
Minimum–Maximum Supply Water Temperature: 40°F/100°F Rated Service Flow: 4 gpm
Recommended
shut-off valve
Recommended
shut-off valve
STEP-BY-STEP INSTALLATION INSTRUCTIONS
3
STEP-BY-STEP INSTALLATION INSTRUCTIONS (cont.)
Select Location
Select a location for the filter that is:
■
protected from freezing.
■
not exposed to direct sunlight.
It is recommended that a shut-off valve be placed on both sides
of the filter.
Install Fittings
Instructions are for installing fittings supplied with the
filter (on some models) or the WHKIT onto 3/4″copper
plumbing. If the unit is to be installed on any other type of
tubing (plastic, PVC, galvanized), different hardware must be
purchased. See instructions with additional hardware
purchased, or consult a qualified plumber.
Apply about 6″of Teflon®tape, in a clockwise direction, to
the pipe threads (course) of each adapter. DO NOT use joint
compound on any parts.
Assemble an adapter to the inlet and outlet of the head.
Start each fitting by hand to make sure they don’t cross
thread. Use a 11⁄8″wrench firmly. DO NOT OVERTIGHTEN.
About one to two thread(s) should remain visible.
Cut Water Line
Turn off water supply and open a nearby faucet to drain
water out of pipes.
Remove the nut and brass ferrule from both compression
fittings and set aside. Using a tape measure or ruler,
measure the distance “D” as shown.
■NOTE: I
t is recommended that the shut-off valve be placed
before and after the filter as shown in the Installation
Overview illustration.
■Select the location for the filter. Mark the distance “D”
on the pipe.
Using a pipe cutter or hacksaw, cut pipe. Sand (file) cut
ends of pipe to assure that they are square and smooth.
3
2
1
Attach Fittings to Water Line
Slip a compression nut onto each pipe.
Next, slip the brass ferrule onto each pipe.
2
1
Nut
Brass ferrule
Nut
Brass ferrule
Measure to shoulder
of fittings. Copper
pipe butts against
this shoulder.
DD
GXWH01C GXWH08C
Installing the Ground Wire
IMPORTANT: A copper or galvanized house cold water pipe is often
used to ground electrical outlets in the home. Grounding protects you
from electrical shock. The water filter housing may have broken this
ground path. To restore connection, install a 12″ long, 8-gauge
copper wire across the filter, tightly clamped using UL-approved
1/2″–1″bronze grounding clamps at both ends as shown. Zinc
clamps should not be used on copper plumbing. For GXWH01C,
wire and clamps may be purchased separately from your local
hardware store, or are available by visiting our Website at
www.GEAppliances.com, or from Parts and Accessories by calling
800.626.2002 (U.S.)or 800.663.6060 (Canada) – order part
number WHKIT.
Clean copper pipe and ends of wire with emery paper. Bare wire
is recommended. If insulated wire is used, it should be stripped
3/4″at each end before cleaning with emery paper.
Attach bronze clamps to copper pipe. Tighten screws.
Attach wire to clamps as shown. Tighten screws.
NOTE: If your house plumbing is plastic, it would not be used as a
grounding path, and this step should be skipped.
3
2
1
Clamp
Final Check
Install filter, if not all ready done. (See Filter Cartridge
Replacement section.)
Slowly turn on water supply.
Check entire system for leaks.
If leaking, shut off water pressure and tighten or reseal
fittings.
Open any downstream faucet and allow filter system to
flush for 5 minutes.
5
4
3
2
1
D
Ground wire
Teflon®tape
Installing the Unit
Align filter assembly with pipe ends making certain that the
incoming water supply is going into the filter opening marked
“IN”. It may be necessary to spread the pipe ends apart to install
filter assembly.
Using a 11⁄8″wrench to hold the adapter in place, use a 11⁄4″
wrench to tighten the nut. Repeat process for other fittings.
If necessary, support the water pipe on either side of the filter
unit.
3
2
1
Product specificaties
Merk: | GE |
Categorie: | Waterfilter |
Model: | GXWH08C |
Heb je hulp nodig?
Als je hulp nodig hebt met GE GXWH08C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Waterfilter GE
16 April 2024
13 Juni 2023
23 April 2023
23 April 2023
21 April 2023
17 April 2023
12 April 2023
4 April 2023
23 Maart 2023
20 Maart 2023
Handleiding Waterfilter
- Waterfilter Electrolux
- Waterfilter Philips
- Waterfilter Panasonic
- Waterfilter LG
- Waterfilter JBL
- Waterfilter Tefal
- Waterfilter Zanussi
- Waterfilter Astralpool
- Waterfilter Avanti
- Waterfilter Bartscher
- Waterfilter Breville
- Waterfilter Brita
- Waterfilter BWT
- Waterfilter Eden
- Waterfilter Eheim
- Waterfilter Fisher And Paykel
- Waterfilter Franke
- Waterfilter Grohe
- Waterfilter Haier
- Waterfilter Kent
- Waterfilter Laica
- Waterfilter Midea
- Waterfilter Smeg
- Waterfilter Solac
- Waterfilter Sunbeam
- Waterfilter Terraillon
- Waterfilter Ufesa
- Waterfilter Verbatim
- Waterfilter Zodiac
- Waterfilter Jata
- Waterfilter Jura
- Waterfilter Juwel
- Waterfilter Oase
- Waterfilter Imetec
- Waterfilter Fluval
- Waterfilter Eldom
- Waterfilter Aarke
- Waterfilter Ecowater
- Waterfilter Flama
- Waterfilter FIAP
- Waterfilter Pureit
- Waterfilter Everpure
- Waterfilter Consul
- Waterfilter T.I.P.
- Waterfilter MSR
- Waterfilter JANDY
- Waterfilter Billi
- Waterfilter LifeStraw
- Waterfilter Baracuda
- Waterfilter Waterdrop
- Waterfilter Zip
- Waterfilter Waterco
- Waterfilter Aquasure
- Waterfilter ZeroWater
- Waterfilter Beemur
- Waterfilter Ionmax
- Waterfilter Puretec
- Waterfilter Tunze
- Waterfilter Aqua Medic
- Waterfilter PUR
- Waterfilter Sera
- Waterfilter Oliveri
- Waterfilter Hydor
- Waterfilter Heissner
- Waterfilter Aquael
- Waterfilter LARQ
- Waterfilter Platypus
Nieuwste handleidingen voor Waterfilter
18 December 2024
18 December 2024
18 December 2024
16 December 2024
10 December 2024
10 December 2024
10 December 2024
10 December 2024
10 December 2024
10 December 2024