Fibaro FIBEFGDW-002-1 Handleiding

Fibaro Deur-/raamsensor FIBEFGDW-002-1

Lees hieronder de 📖 handleiding in het Nederlandse voor Fibaro FIBEFGDW-002-1 (16 pagina's) in de categorie Deur-/raamsensor. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
FIBARO DOOR/WINDOW SENSOR 2
FGDW-002
CONTENTS
#1: Description and features 3
#2: Basic activation 4
#3: Adding/removing the device 5
#4: Physical installation 6
#5: Operating the device 7
#6: Association 9
#7: Advanced parameters 10
#8: Specications 14
#9: Regulations 15
O P E R A T I N G
M A N U A L
EN
v1.1
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
The alarm functionality of devices is an additional feature increasing
the comfort level of your home automation system. If you want to
use professional security service, please contact them to determine
what systems can provide a protection of your estate.
Compliance with safety standards:
The device is designed to be used in Z-wave home automation sys-
tems (e.g. FIBARO) and is complaint with IEC/UL/CSA 60950-1. In case
of the integration with another system, e.g. alarm system, it is re-
quired to verify the compliance with additional standards.
!
General information about
the FIBARO System
FIBARO is a wireless smart home automation system, based on the
Z-Wave protocol. All of available devices can be controlled through
a computer (PC or Mac), smartphone or tablet. Z-Wave devices are
not only receivers, but can also repeat the signal, increasing the
Z-Wave network’s range. It gives advantage over traditional wireless
systems that require direct link between transmitter and receiver, as
a result the construction of the building could aect network’s range
negatively.
Every Z-Wave network has its unique identication number (home
ID). Multiple independent networks can exist in the building without
interfering. Transmission security of FIBARO System is comparable to
wired systems.
Z-Wave technology is the leading solution in smart home automation.
There is a wide range of Z-Wave devices that are mutually
compatible, independently of manufacturer. It gives the system the
ability to evolve and expand over time. For more information visit
www.baro.com.
3
DESCRIPTION AND FEATURES
Main features of FIBARO Door/Window Sensor 2:
• Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network Security Mode) with
AES-128 encryption,
• Door/window opening detected through separation of Sensor’s
body and a magnet,
• Built-in temperature sensor,
• Detects tampering, when detached or opened,
• Easily mounted on doors, windows, garage gates and roller blinds,
• Battery powered,
• Visual LED indicator signalling status of the device,
• 7 color variations.
FIBARO Door/Window Sensor 2 is a wireless, battery powered Hall
eect contact sensor, compatible with the Z-Wave Plus standard.
Changing the device’s status will automatically send signal to the
Z-Wave controller and associated devices.
Sensor can be used to trigger scenes and wherever there is a need
for information about opening or closing of doors, windows, garage
doors, etc. Opening is detected by separating the sensor’s body and
the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with
a built-in temperature sensor.
#1: Description and features
FIBARO Door/Window Sensor 2
is a fully compatible Z-Wave
PLUS device.
NOTE
This device may be
used with all devices
certied with Z-Wave
Plus certicate and
should be compatible
with such devices pro-
duced by other manu-
facturers.
i
NOTE
Z-Wave Controller
must support Z-Wave
Security Mode in
order to fully utilize the
product.
i


Product specificaties

Merk: Fibaro
Categorie: Deur-/raamsensor
Model: FIBEFGDW-002-1
Kleur van het product: Wit
Breedte: 18 mm
Diepte: 71 mm
Hoogte: 18 mm
Gebruikershandleiding: Ja
Connectiviteitstechnologie: Draadloos
Accu/Batterij voltage: 3.6 V
Ondersteund aantal accu's/batterijen: 1
Interface: Z-Wave
Frequentie: 868.4 MHz
Omgevingstemperatuur (min): 0 °C
Omgevingstemperatuur (max): 60 °C
Maximum indoorbereik: 40 m
Maximum outdoorbereik: 50 m
Voeding, voltage ingang: 3.6 V
Aantal producten inbegrepen: 1 stuk(s)
Type batterij: ER14250

Heb je hulp nodig?

Als je hulp nodig hebt met Fibaro FIBEFGDW-002-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Deur-/raamsensor Fibaro

Handleiding Deur-/raamsensor

Nieuwste handleidingen voor Deur-/raamsensor