Fibaro FGK-101-ZW5 Handleiding

Fibaro Deur-/raamsensor FGK-101-ZW5

Lees hieronder de 📖 handleiding in het Nederlandse voor Fibaro FGK-101-ZW5 (16 pagina's) in de categorie Deur-/raamsensor. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

FIBARO DOOR/WINDOW SENSOR 2

FGDW-002

CONTENTS

#1: Description and features 3

#2: Basic activation 4

#3: Adding/removing the device 5

#4: Physical installation 6

#5: Operating the device 7

#6: Association 9

#7: Advanced parameters 10

#8: Specications 14

#9: Regulations 15

O P E R A T I N G

M A N U A L

v1.1

Important safety information

Read this manual before attempting to install the device!

Failure to observe recommendations included in this manual

may be dangerous or cause a violation of the law. The manufacturer,

Fibar Group S.A. will not be held responsible for any loss or damage

resulting from not following the instructions of operating manual.

The alarm functionality of devices is an additional feature increasing

the comfort level of your home automation system. If you want to

use professional security service, please contact them to determine

what systems can provide a protection of your estate.

Compliance with safety standards:

The device is designed to be used in Z-wave home automation sys-

tems (e.g. FIBARO) and is complaint with IEC/UL/CSA 60950-1. In case

of the integration with another system, e.g. alarm system, it is re-

quired to verify the compliance with additional standards.

General information about

the FIBARO System

FIBARO is a wireless smart home automation system, based on the

Z-Wave protocol. All of available devices can be controlled through

a computer (PC or Mac), smartphone or tablet. Z-Wave devices are

not only receivers, but can also repeat the signal, increasing the

Z-Wave network’s range. It gives advantage over traditional wireless

systems that require direct link between transmitter and receiver, as

a result the construction of the building could aect network’s range

negatively.

Every Z-Wave network has its unique identication number (home

ID). Multiple independent networks can exist in the building without

interfering. Transmission security of FIBARO System is comparable to

wired systems.

Z-Wave technology is the leading solution in smart home automation.

There is a wide range of Z-Wave devices that are mutually

compatible, independently of manufacturer. It gives the system the

ability to evolve and expand over time. For more information visit

www.baro.com.

DESCRIPTION AND FEATURES

Main features of FIBARO Door/Window Sensor 2:

• Compatible with any Z-Wave or Z-Wave+ Controller,

• Supports protected mode (Z-Wave network Security Mode) with

AES-128 encryption,

• Door/window opening detected through separation of Sensor’s

body and a magnet,

• Built-in temperature sensor,

• Detects tampering, when detached or opened,

• Easily mounted on doors, windows, garage gates and roller blinds,

• Battery powered,

• Visual LED indicator signalling status of the device,

• 7 color variations.

FIBARO Door/Window Sensor 2 is a wireless, battery powered Hall

eect contact sensor, compatible with the Z-Wave Plus standard.

Changing the device’s status will automatically send signal to the

Z-Wave controller and associated devices.

Sensor can be used to trigger scenes and wherever there is a need

for information about opening or closing of doors, windows, garage

doors, etc. Opening is detected by separating the sensor’s body and

the magnet.

In addition the FIBARO Door/Window Sensor 2 is equipped with

a built-in temperature sensor.

#1: Description and features

FIBARO Door/Window Sensor 2

is a fully compatible Z-Wave

PLUS device.

NOTE

This device may be

used with all devices

certied with Z-Wave

Plus certicate and

should be compatible

with such devices pro-

duced by other manu-

facturers.

NOTE

Z-Wave Controller

must support Z-Wave

Security Mode in

order to fully utilize the

product.

Product specificaties

Merk:	Fibaro
Categorie:	Deur-/raamsensor
Model:	FGK-101-ZW5
Kleur van het product:	Wit
Breedte:	24.92 mm
Hoogte:	8 mm
Connectiviteitstechnologie:	Draadloos
Accu/Batterij voltage:	3.6 V
Interface:	Z-Wave
Omgevingstemperatuur (min):	0 °C
Omgevingstemperatuur (max):	60 °C
Aantal producten inbegrepen:	1 stuk(s)
Type batterij:	ER14250
Zender breedte:	70.79 mm
Zender diepte:	17.7 mm
Zender hoogte:	17.7 mm