Felisatti RHF45 Handleiding

Felisatti Boormachine RHF45

Lees hieronder de 📖 handleiding in het Nederlandse voor Felisatti RHF45 (25 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/25
Fig.1 J
A
B
E
C
H
G
I
F
A
B
C
K
JF
I
H
G
D
E
Fig.2
B
B
Fig.4
K
Fig.3
TECHNICAL DATA
Electro-pneumatic rotary hammer RHF45/1000VET RHF50/1200VERT
Rated power W 1005 1200
No load speed rpm 210-325 210-325
Hammer rate under load /min 1400-2400 1600-2700
Impact energy J 1-8.5 1-14
Chisel adjustment º 12
30 1230
A
dapto
r
SDS - max 45 SDS - max 45
Max.drilling capac. in concrete mm 12-45 12-50
Max.drilling capac. with hollow bit mm 40-100 40-125
Máx.drilling capac. with solid bit mm 19-38 19-40
A
pprox. weight (without accessories) kg 7 7.6
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at
hand to use when carrying out maintenance on the
indicated parts.
If the machine is used carefully and normal maintenance
is carried out, it will work for a long time.
The functions and use of the tool you have bought shall
be only those described in this manual. Any other use
of the tool is strictly forbidden.
ILUSTRATIONS
DESCRIPTION (See figures)
A Dustproof hood (Fig.1)
B Bit holder ring (Fig.1 and 4)
C Auxiliary handle (Fig.1 and 3)
D Unlocking button (Fig.2)
E Mode selection switch (Fig.1 and 2)
F Air vents (Fig.1)
G Brush covers (Fig.1)
H Speed adjustment switch (Fig.1)
I On/Off switch (Fig.1)
J Clamp collar (Fig.1)
K Clamp unit (Fig.1)
SAFETY INSTRUCTIONS
See “Safety instructions” enclosed manual, supplied
together with this instruction manual.
Warning! When drilling in amianthus/asbestos and/or
silica stone, the dust produced is extremely harmful to
your health. Wear protection against inhalation of this
dust, in compliance with current regulations on accident
prevention. Follow the insurance company’s safety in-
structions regarding the responsibility of employees.
For your personal safety, always connect the machine
to a mains supply by a differential and thermal cut-out
switch, in accordance with regulations on low-voltage
wiring sitemaps.
Do not perforate the machine casing, as this would
destroy the protective insulation (use adhesive labels).
Always unplug the machine before doing any work on it.
Warning! Before each use, inspect the plug and lead.
Should they need replacing, have this done by an offi-
cial service centre. Only plug the machine in when it is
switched off.
Always keep the lead out of the machine’s working area.
Only plug the machine in when it is switched off.
Do not allow the machine to get wet, nor should it be
used in wet environments.
When using the machine, always wear safety goggles,
gloves and non-slip footwear, and it is advisable to
wear ear protection.
Do not touch the bit when during or immediately
after working, as it becomes very hot and can
cause serious burns.
Hold the machine firmly by the handle and the auxiliary
handle, otherwise the recoil produced could cause the
machine to work imprecisely or even dangerously.
Always use the auxiliary handle.
Never attempt to clean off dust or shavings resulting
from drilling when the machine is operating.
Do not use diamond core bits.
When drilling walls, ceilings or floors, take care to
avoid electric wires and gas or water pipes.
BRIEF DESCRIPTION
A pneumatic percussion unit generates the power nec-
essary for hammer drilling or chiselling on masonry.
Just when we hit a conventional chisel with a hammer, a
free piston strikes the bit or chisel, which can move
lengthways, through an intermediate part. This free
piston is driven by a second piston activated by an
electric motor through an air cushion. This electro-
pneumatic principle offers great percussion elasticity and
work free from recoil.
Unlike a normal hammer drill, the drilling capacity does
not depend on the pressure exerted on the machine.
Use of the machine:
RHF models can be used for percussion drilling and
chiselling in stone.
Any use differing from the above mentioned is strictly
forbidden.
Additional features of the electro-pneumatic hammer:
- The machine is equipped with a safety clutch or mecha-
nism, which operates when a bit seizes up, protecting
the user and the machine’s electro-mechanical parts.
The clutch is released automatically.
- Warning! This machine must not be used with hole
saws, core bits, diamond bits, etc., as they tend to jam
in the hole easily. This would cause the safety clutch to
trip out too often.
- Toolholder B for hammer drilling with SDS-max
mount for using tools with SDS-max shanks.
- Electronic speed control of the axle H enables us to: use
smaller bits with no danger of them breaking, drill light

Product specificaties

Merk: Felisatti
Categorie: Boormachine
Model: RHF45

Heb je hulp nodig?

Als je hulp nodig hebt met Felisatti RHF45 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Boormachine Felisatti

Felisatti

Felisatti DMF32 Handleiding

23 Juli 2023
Felisatti

Felisatti RH36 Handleiding

23 Juli 2023
Felisatti

Felisatti DMF23 Handleiding

23 Juli 2023
Felisatti

Felisatti RHF45 Handleiding

23 Juli 2023

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

DeWalt

DeWalt DCD1624 Handleiding

2 Januari 2025
Makita

Makita DDF459 Handleiding

21 December 2024
Total

Total TRHLI1601 Handleiding

16 December 2024
Black Decker

Black Decker 1963 Handleiding

8 December 2024
Black Decker

Black Decker 1350-09 Handleiding

8 December 2024
Gude

Gude GTB 16/5 R Handleiding

8 December 2024
Hikoki

Hikoki DV36DA Handleiding

7 December 2024
Hikoki

Hikoki DH26PC2 Handleiding

7 December 2024
Hikoki

Hikoki DH28PCY2 Handleiding

7 December 2024
Zipper

Zipper ZI-BHA1500DN Handleiding

7 December 2024