EtiamPro LQC1D-V1 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor EtiamPro LQC1D-V1 (9 pagina's) in de categorie Dimmer. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/9
LQC1D-V1 Single channel
PRO
Device Manual FW 1.0
Rev. 2018-05-04
pag. 1/9
FEATURES
• Output: 1 x channel
• BUS+FADER+DIMMER+DRIVER
• Input: DC 12/24/48 Vdc
• BUS Command: DMX512+RDM, DALI, MODBUS
• LOCAL Command: N.O. push button (with or without memory), 0-10V, 1-10V,
Potentiometer
• Adjusting the brightness
• Voltage outputs for R-L-C loads
• Typical efficiency > 95%
• Adjusting the brightness up to completed off (Dim to dark)
• Level minimum of brightness: 0.1% (1% in push)
• D-PWM Modulation
• Adjusting D-PWM frequency: 300 / 600 / 1200 Hz
• Adjusting output curve: Linear / Quadratic / Exponential
• Soft start and soft stop
• Optimized output curve
• Master / Slave Function (DMX variant)
• Extended temperature range
• 100% Functional test – 5 Years warranty
Constant voltage variants (common anode)
CODE Supply Voltage Output Channel Command
LQC1D-V1 12/24/48V DC 1x8A max 1 DALI – N.O. push button /
0÷10 / 1÷10 / Potentiometer PROFESSIONAL
Protections
OTP Over temperature protection
OVP Over voltage protection
UVP Under voltage protection
RVP Reverse polarity protection
IFP Input fuse protection
SCP Short circuit protection
OCP Open circuit protection
CLP Current limit protection
LQC1D-V1 1 channel
LED DRIVERS
LQC1D-V1 Single channel
PRO
Device Manual FW 1.0
Rev. 2018-05-04
pag. 2/9
Reference Standards
EN 61347-1 Lamp controlgear - Part 1: General and safety requirements
EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar
equipment
EN 61547 Equipment for general lighting purposes - EMC immunity requirements
EN 50581 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of
hazardous substances
IEC/EN 62386-101 Digital addressable lighting interface - Part 101: General requirements - System
IEC/EN 62386-102 Digital addressable lighting interface - Part 102: General requirements - Control gear
IEC/EN 62386-207 Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device
type 6)
IEC 60929-E.2.1 Control interface for controllable ballasts - control by d.c. voltage - functional specification
ANSI E 1.3 Entertainment Technology - Lighting Control Systems - 0 to 10V Analog Control Specification
ANSI E1.11 Entertainment Technology - USITT DMX512-A - Asynchronous Serial Digital Data Transmission Standard for
Controlling Lighting Equipment and Accessories
ANSI E1.20 Entertainment Technology-RDM-Remote Device Management over USITT DMX512 Networks
- MODBUS APPLICATION PROTOCOL SPECIFICATION V1.1b
Technical Specification
Variants
Constant voltage
Supply voltage DC min: 10.8 Vdc .. max: 52,8 Vdc
Output voltage = Vin
Output current max 8 A peak
1)
max 7,5A @55°C 1)
max 6,5A @60°C 1)
Nominal power1) @12V 78 W (6,5A @ 60°C) – 90 W (7,5A @55°C)
@24V 156W (6,5A @ 60°C) – 180 W (7,5A @55°C)
@48V 312W (6,5A @ 60°C) – 360 W (7,5A @55°C)
Thermal shutdown 150 °C
Command supply current 0,5mA (per 1-10V)
Command required current (max) 0,1mA (per 0-10V)
D-PWM dimming frequency 300Hz – 600Hz – 1200Hz
D-PWM resolution 16 bit
D-PWM range 0,1% ÷ 100%
Storage Temperature min: -40 max: +60 °C
Ambient Temperature
1) min: -40 max: +60 °C
Protection grade IP10
Wiring 2.5mm² solid - 1.5mm² stranded - 30/12 AWG
Mechanical dimensions 92 x 36 x 62 mm - DIN RAIL 2mod.
Packaging dimensions 124 x 71 x 48
Weight 88g
1) maximum value, dependent on the ventilation conditions
LQC1D-V1 1 channel
LED DRIVERS
LQC1D-V1 Single channel
PRO
Device Manual FW 1.0
Rev. 2018-05-04
pag. 3/9
•Installation
Opening the cover
For the Dip-switch and selectors configuration it is necessary to pull
up the cover of the device. See the picture.
Mechanical dimension:
(without connectors)
LQC1D-V1 1 channel
LED DRIVERS
SEE APPROPRIATE
BUS SETUP
DALI / DMX / MODBUS
DC IN 12/24/48 Vdc
SWITCHING
SUPPLY
+ -
Vout
L
230V
See SETUP &
INSTALLATION
point 2)
36
90,5
6,5
25,5
48,3
62
Product specificaties
| Merk: | EtiamPro |
| Categorie: | Dimmer |
| Model: | LQC1D-V1 |
Heb je hulp nodig?
Als je hulp nodig hebt met EtiamPro LQC1D-V1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Dimmer EtiamPro
23 November 2023
8 Juli 2023
6 Juli 2023
Handleiding Dimmer
- Dimmer ABB
- Dimmer Arendo
- Dimmer BeamZ
- Dimmer Berker
- Dimmer DIO
- Dimmer Elro
- Dimmer Eminent
- Dimmer GAO
- Dimmer GE
- Dimmer Gira
- Dimmer Grasslin
- Dimmer Hager
- Dimmer Handson
- Dimmer InterBar
- Dimmer KlikaanKlikuit
- Dimmer Mercury
- Dimmer Paladin
- Dimmer Peha
- Dimmer Schneider Electric
- Dimmer Sonoro
- Dimmer Steinel
- Dimmer TP Link
- Dimmer Tronic
- Dimmer Trust
- Dimmer VAMA
- Dimmer Velbus
- Dimmer Velleman
- Dimmer Jung
- Dimmer Cotech
- Dimmer Eurolite
- Dimmer Merten
- Dimmer Chacon
- Dimmer American DJ
- Dimmer Chauvet
- Dimmer Fibaro
- Dimmer Eltako
- Dimmer Homematic IP
- Dimmer AMX
- Dimmer Adastra
- Dimmer Tradim
- Dimmer Vimar
- Dimmer Intertechno
- Dimmer Ltech
- Dimmer Ehmann
- Dimmer Bearware
Nieuwste handleidingen voor Dimmer
26 Juli 2024
26 Juli 2024
26 Juli 2024
26 Juli 2024
26 Juli 2024
26 Juli 2024
26 Juli 2024
26 Juli 2024
26 Juli 2024
26 Juli 2024