EtiamPro LQC1B-V1 Handleiding

EtiamPro Dimmer LQC1B-V1

Lees hieronder de 📖 handleiding in het Nederlandse voor EtiamPro LQC1B-V1 (4 pagina's) in de categorie Dimmer. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
LQC1B-V1 Single channel
EASY DIMMER
Data Sheet FW 3.0+
Rev. 2018-01-22
pag. 1/4
FEATURES
• FADER+DIMMER+DRIVER
• DC Input: 12/24/48 Vdc
• Command: N.O. push button
• Adjusting the brightness of white light
• Current outputs or voltage outputs for R-L-C loads
• Typical efficiency > 95%
• Adjusting the brightness up to completed off
• Soft start and soft stop
• Optimized output curve
• Extended temperature range
• 100% Functional test - 5 Years warranty
Constant voltage variants (common anode)
CODE Supply voltage Output Channel Command
LQC1B-V1 12-48V DC 1 x 8A max 1 N.O. push button
Application: Dimmer
Protections
OTP Over temperature protection
OVP Over voltage protection (*)
UVP Under voltage protection (*)
RVP Reverse polarity protection (*)
IFP Input fuse protection (*)
SCP Short circuit protection
OCP Open circuit protection
CLP Current limit protection
(*) Only control logic protection
LED DRIVERS
LQC1B-V1 Single channel
EASY DIMMER
Data Sheet FW 3.0+
Rev. 2018-01-22
pag. 2/4
Reference standards
EN 61347-1:2008 +A1:2011+A2:2013 Lamp controlgear - Part 1: General and safety requirements
EN 55015:2013+A1:2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting
and similar equipment
EN 61547:2009 Equipment for general lighting purposes - EMC immunity requirements
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with respect
to the restriction of hazardous substances
Technical Specifications
Variants
Constant Voltage
Supply voltage min: 10,8 Vdc .. max: 52,8 Vdc
Input current max 8 A peak
1)
Output voltage = Vin
Output current max 8 A peak
1)
max 7,5A @20°C 1)
max 6,5A @40°C 1)
Nominal power 1) @12V 78 W
@24V 156 W
@48V 312 W
Thermal shutdown 150 °C
D-PWM dimming frequency 250Hz
D-PWM resolution 16 bit
D-PWM range 1 – 100 %
Storage Temperature min: -40 max: +60 °C
Ambient Temperature 1) min: -10 max: +40 °C
Protection grade IP20
Wiring 2.5mm² solid - 1.5mm² stranded - 30/12 AWG
Mechanical dimensions 45 x 58 x 25 mm
Packaging dimensions 68 x 56 x 35 mm
Weight 40g
1) maximum value, dependent on ventilation conditions
LED DRIVERS
LQC1B-V1 Single channel
EASY DIMMER
Data Sheet FW 3.0+
Rev. 2018-01-22
pag. 3/4
Installation
Connect the switching supply (12-48V), connect the N.O. push button (to 5 or 0V, with/without memory), connect leds.
Configuration
N.O. PUSH BUTTON
1- Memory function: the device stores its state in case of blackout (if N.O. push buttons connected to 5V).
2- Eco function: when recovering the power supply the device starts-up from a switched off condition (if N.O. push buttons connected to 0V).
3- Preset function: when recovering the power supply the device starts-up from a previously set condition. The preset can be stored by
connecting N.O. push buttons to 5V during installation (and to 0V after installation).
LED DRIVERS


Product specificaties

Merk: EtiamPro
Categorie: Dimmer
Model: LQC1B-V1

Heb je hulp nodig?

Als je hulp nodig hebt met EtiamPro LQC1B-V1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden