Ernitec 0070-08316 Handleiding

Ernitec Bewakingscamera 0070-08316

Lees hieronder de 📖 handleiding in het Nederlandse voor Ernitec 0070-08316 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Special Announcement

, For more information please refer to website.

Fully und erstand this docum ent before using this device, an d

strictl y observe rules in this d ocument when using t his devic e. If

you install this dev ice in publ ic places , provide the tip "You have

entered the area of el ectroni c surveil lance" in an eye-catching

place. Fa ilure to correctly use electrical products may ca use fire

and severe injurie s.

It alerts you to moderate dange rs which, if not

avoided , may cause minor or moderate inj uries.

It alerts you to risks. Neglect of these risks may

cause devic e damage, data loss, de vice

perform ance dete riorati on, or unpredictable result s.

It provides additi onal info rmation.

ŸStrictly o bserve i nstalla tion requi rements when installing th e

device. The manufacturer shall n ot be held responsib le for

device damage caus ed by users' non-conformanc e to these

require ments.

ŸStrictl y conform to l ocal ele ctrical sa fety standards and u se

power adapters that are marked with the LP S standard when

install ing and usi ng this dev ice. Otherwise, this device m ay be

damaged.

ŸUse accessories delivered w ith this device. The voltage must

meet inpu t voltage requirem ents for th is device.

ŸIf this devi ce is insta lled in places with unsteady voltage, ground

this device to disch arge high energy such as electrical surg es in

order to prevent the p ower supply from burning out.

ŸWhen this d evice is in u se, ensure that no water or any liquid

flows int o the devic e. If water or liquid unexpecte dly flows into

the devic e, immediately power off the devic e and disconnect all

cables (such as powe r cables and network cables) from this

device.

ŸDo not focu s strong light (such a s lighted bulbs or sunl ight) on

ŸAv oid heavy l oads, intensive sh akes, and s oaking to prevent

damages during transporta tion and s torage. The wa rranty does

not cover a ny device d amage that is caused during sec ondary

packagi ng and transportation after the original packaging is

taken apart.

ŸProtect this device from fall-down and i ntensiv e strikes, k eep the

device away from mag netic fie ld interference, and do not ins tall

the devic e in places with shaking surfaces or under s hocks.

ŸClean the d evice wit h a soft dry cl oth. For stu bborn dirt, dip the

cloth int o slight neutral cleanser, gently wipe the dirt with the

cloth, an d then dry the device.

ŸDo not jam the ventilation open ing. Foll ow the installation

instruc tions provided in this document when inst alling the device.

ŸKeep the device away from heat sou rces such as radiato rs,

electric heaters , or other hea t equipme nt.

ŸKeep the device away from moist , dusty, extremely hot or cold

places, or places wi th strong e lectric radiation.

ŸIf the devi ce is instal led outd oors, take i nsect- an d moisture-

proof measures to av oid circu it board corrosion that can affect

monitoring.

ŸRemove th e power plu g if the devi ce is idle for a long time .

ŸBefore unpacking , check whether the fragile sti cker is dam aged.

If the fragile sticker is damaged, contac t custome r service s or

sales personnel. The manufacturer shall not be held responsib le

for any artificial damage of the fragile s ticker.

ŸAll compl ete produ cts sold by t he manufa cturer are delivered

along with namepla tes, quick setup gui de and acce ssories after

strict inspection. The manufacturer sha ll not be held respons ible

for counterfeit pr oducts.

ŸThe manufacturer w ill update this manual according to produ ct

functio n enhance ment or changes and re gularly update the

software and hardw are described in this manual. Update

information will be added to new versions of this manual without

prior notice.

ŸThis manual may contain mispr ints, technology information that

is not accurate enough, or prod uct functi on and ope ration

descrip tion that i s slightl y inconsi stent with the actual product,

the final i nterpre tation of c ompany is as a standard.

ŸThis manual is only for reference and does not ensure that the

information is totally consistent with the actual product. For

consiste ncy, see the actual produc t.

Precautions

Open the package, check the app earance o f product fo r no

obvious damage, and confirm the item lis t for table 1-1 is

consistent.

Table 1 1- Pack ing list

2.1 Device Ports

Different devices may h ave differen t multi-head cables;

Please re fer to the actual product.

NOTE

this device. Otherwise, the s ervice li fe of the ima ge sensor may

be shortened.

ŸIf this dev ice is insta lled in places where thunder and lightn ing

frequen tly occur, g round the d evice nearby to discharge hig h

energy such as thunder strikes in order to prevent device

damage.

ŸThe laser f rom the las er high speed camera c an not dire ctly face

the human e yes to avoid possible damage to the human eye s.

ŸLaser hig h-speed c ameras’ lasers ma y cause fire hazards w hen

directly facing flammable objects within short distance, Please

keep a cert ain safe distance du ring installation.

Figure 2- 1 Multi-head cable

Table 2-1 Multi-head cable description

2 2 Camer a Dimensions.

Figure 2 2- Dimensi ons (Unit :mm)

Different devices may h ave differen t dimensions; Plea se

refer to th e actual product.

NOTE

CAUT ION

WARNING

CAUT ION

Device Structure2

Open Package Examination1

ID Core Functio n Descrip tion

1N A/Audio output Connect t o an external audio

device such as a speak er.

2N A/

Audio inp ut

Receive an analog au dio signal

from devices such as a

sound pic kup devic e

3N/A

Supply power

DC12V

Yellow

green

Groundi ng wire

Connect t o ground.

5N/A

Network i nterface

Connect t o a standard Etherne t

cable.

Purple

Alarm inp ut 1

Alarm inp ut and alar m output

ports.

Gray Alarm inp ut COM

Yellow Alarm inp ut 2

Orange

Alarm output COM

White Alarm output 1

Component

Quantity

Remark

High Spee d Dome Camera

Quick Set up Guide 1

Power adapter 1

Power wire 1

A pair of glov es 1

Wall mount brack et 1 Optional

L Wrench 1

Stainle ss hexagon screw

Expansion bolt 4

292.6

150

Figure 2 3- Installing SD card

Loose the four screws

take out the device core

Plug SD card in

φ173.2

φ42

φ38

Reset button

Jupiter Pro Network Camera

5MP PTZ 30x Zoom Optical

Quick Setup Guide

Item no.: 0070-08316

4.3 Browsing Video

To ensure the real-time video can be played properly, you muﬆ perform

the following operation when you log in the web for the ﬁrﬆ time:

If you can view the video directly please ignore the of adding , ﬆep

truﬆed . sites

Figure 4 3 - Adding a trusted site

Step 2 In the Internet Explorer, choose Tool Internet Options > >

Security > Cuﬆomer level, and set Download unsigned

ActiveX control and initialize and script ActiveX controls not

marked as safe for scripting under ActiveX controls and

plug-ins to Enable, as shown in ﬁgure 4-4.

Step 3 Download and install the player control as prompted.

If the repair tips displayed when installing the control, please

ignore the prompt, and continue the installation, the login page is

displayed when the control is loaded.

Step 1 Open the Internet Explorer. Choose Tools Internet options > >

Security T > ruﬆed sites > , in the display dialog box, click Sites

Add, as shown in ﬁgure 4-3.

To browse a real-time video, click Live Video. The Live Video page

is displayed, as shown in figure 4-5.

4.4 Two-way udio a

Partial cameras do not support two-way udio this section do not a ,

apply.

Figure 4 5 - Live Video

Figure 4 4- Configuring ActiveX control and plug-in

F 3 2igure - Aligning the screw holes

NOTE

Connection:

Step 1 Connect microphone to audio input interface of camera.

Step Connect speaker to the PC audio output interface 2 .

Step Log in camera Web, click to turn on 3 two-way udio a .

4 4.2 PC Camera.

Step1 Connect microphone to PC audio input interface.

Step2 Connect speaker to camera audio out interface.

Step3 Log in camera Web, click to turn on two-way udio a .

Figure 3-1 Bracket dimensions(unit:mm)

4.1 Login

Step 1 Open the Internet Explorer, enter the IP address of IP camera

(default value: 192.168.0.120) in the address box, and press

Enter. The login page is displayed as shown in ﬁgure 4-1 .

Step Input the user name and password.2

Ÿ The default user name is admin. The default password is admin.

Change the password when user logs into the syﬆem for ﬁrﬆ time to

ensure syﬆem security.

Ÿ You can change the syﬆem display language on the login page.

NOTE

Step3 Click Login, the main page is displayed.

4.2 Modify IP address

Choose , the Conﬁguration > Device > Local Network Local Network

page is displayed.

Enter the IP address in the IP Address box and click as shown in Apply

ﬁgure 4-2.

After the success of the IP address setting, please use the new IP

address to log in the Web interface.

Figure 4 2 - Local Network

User Name

Password

English

Figure 4 1 - Login

Step 2 Thread all cables through the cable hole on the side of the

bracket,as shown in the figure 3-2.

Step 3 Attach the high speed dome to the bracket, the tighten the

three screws, as shown in figure 3-3.

Figure 4 6 - Alarm

4.5 Alarm Configuration

Partial cameras do not support alarm this section do not apply. ,

Alarm input and Alarm output connection:

Step1 Connect alarm input device to Alarm IN0 and Alarm COM0

of multi-head cable.

Step2 Connect alarm output device to Alarm OUT1 and Alarm

COM1 of multi-head cable, alarm output interface can

connect to normal open device only.

Step3 Log in Web, Choose Configuration Alar Alarm> m >

output, set the parameters as shown in figure 4-6.

Step4 Choose , Configuratio Alar /O Alarmn > m > I Linkage

enable the I/O Alarm and set the parameters of Schedule

Setting.

NOTE

441. . Camera PC

Quick Configuration(e.g IE)4

3 Device Installation

Installation Steps:

Step Please make the mark based on bracket dimensions for 1

drilling the hole. Drill four 8 holes over 60 mm depth, and φ

drive the plastic anchors into the holes.

备注 Wall bracket Ceiling bracket

Step 4 Mount the high speed dome to the wall or ceiling and tighten

the four expansion bolts on the bracket completely.

备注 Wall bracket Ceiling bracket

F 3 3igure - Fixing the bracket and dome

Live Video

St re am Ca me ra

Playback Configurati on

If the high-speed camera is a laser camera, the laser can't directly

face the human eyes, and it can't illuminate directly the flammable

object. It needs to keep a certain safe distance to avoid fire.

NOTE

Alarm Output

Ala rm Output

Ala rm Output M ode

Ala rm Time (ms)(0: Continu ous )

Timi ng Alarm Output

Name

Valid Si gnal

Man ual Contr ol

Cl os e

Swit ch M od e

Sta rt Sto p

Ref re sh Ap p ly

I/O Alarm Linkage

Ala rm Input

Name

Trigger Mo de

Ala rm Input

Output C hann el

PTZ Linkage

Ala rm Record

SMTP

Co nn ec t

Local Network

Net work Card ID

IP Protocol

DHC P

IP Addre ss

Sub net M ask

Def ault Gateway

Preferred D NS Se rver

Alt ern ate D NS Server

MTU (12 80- 150 0)

Refresh Apply

1500

192.168.0.120

255.255.255.0

192.168.0.1

IPv4

78.3 4-φ6.5

100.0

63.0 4-φ6.2

φ115.5 63.0

Tightening

the sc rews

Tightening

the sc rews

ht tp :/ /1 92 .1 68 .0 .1 20

Product specificaties

Merk:	Ernitec
Categorie:	Bewakingscamera
Model:	0070-08316

Heb je hulp nodig?

Als je hulp nodig hebt met Ernitec 0070-08316 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Bewakingscamera Ernitec

Ernitec 0070-24127-WATERPROOF Handleiding

11 Juni 2024

Ernitec 0070-08117 Handleiding

3 Mei 2024

Ernitec Wolf Pro Handleiding

18 Maart 2024

Ernitec 0070-08112 Handleiding

27 Juli 2023

Ernitec 0070-08214 Handleiding

27 Juli 2023

Ernitec 0070-08215 Handleiding

27 Juli 2023

Ernitec 0070-08316 Handleiding

27 Juli 2023

Ernitec Orion DX 832 IR Handleiding

9 Juli 2023

Ernitec TAURUS DX 622 Handleiding

8 Juli 2023

Ernitec 0070-04344IR Handleiding

6 Juli 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Honeywell HC35WE5R3 Handleiding

20 December 2024

Honeywell Performance H4W8PER2V Handleiding

20 December 2024

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024

TP Link VIGI C450 Handleiding

18 December 2024

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024

Hikvision DS-2CE17U0T-LF Handleiding

18 December 2024