Epson ELPCB02 Handleiding

Epson Beamer ELPCB02

Lees hieronder de 📖 handleiding in het Nederlandse voor Epson ELPCB02 (3 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 121 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Connection & Control Box Operation Guide

■ How To Switch Input Sources

1 2 3

■ Part Names and Functions

Connect devices Change sources Projection starts

Temporarily interrupts video and audio

output from the projector or speakers,

except for the [Mic] port and the [AUX In]

port.

Turns the projector power on or o.

Congures the audio output from the

speakers when they are connected to this

product.

Do not change this switch because the

setting was done optimally at installation.

Temporarily mutes audio signals from the

[Mic] port and the [AUX In] port. While audio

is muted, the indicator of the mute button

turns green.

Indicates the status of the Connection &

Control Box. (This does not indicate the

status of the projector. )

：Operating normally.

：In standby. Press any button to

resume.

：An error has occurred. Unplug the

Connection & Control Box, and contact

your dealer.

Connects the projector to this device. See

the for more details.Installation Manual

■ Input Ports

When using a commercially available dynamic microphone, connect to the• [Mic] port.

Plug-in power is not supported.

When inputting audio from a portable audio player and such, connect the audio cable to •

[AUX In] port. The audio input from [AUX In] port is always played regardless of the

selected source.

When connecting a recording device, connect the audio cable to • [REC Out] port. The audio

input from the audio input ports, the Aux In, and the Mic port is output. Audio is output in a

constant level and cannot be adjusted.

[Computer1] input port

[Computer2] input port

[A/V Mute] button

[Projector] button

Input source buttons

Input interface cover

Operation indicator

Output ports

[Audio Mute] button

Dip switch

[Volume] dial

Power switch

[HDMI1/MHL] port

[HDMI2] port

[USB-A] port

[Mic] port (φ6.3 mm stereo jack)/

[Audio1] port

[Audio2] port

[AUX In] port

[REC Out] port

[Audio-L/R] port (RCA jack)

[Video] input port (RCA jack)

[USB-B] port

[S-Video] input port (Mini DIN 4-pin jack)

Blue

Orange

Blue

(φ3.5 mm stereo mini jack)

We recommend using a shielded cable.

[Volume] dial (mic input)

(Mini D-Sub 15-pin (female))

Connect cables according to your devices to use.

HDMI

MHL

■

Connection Examples

When the projector only has one HDMI port, make sure you connect the HDMI •

cable to the [HDMI1/MHL] port.

You may not be able to connect an MHL cable to all devices. Also, depending on •

the model or settings of the device, images may not be projected correctly.

When connecting an MHL cable, make sure the cable meets the MHL standards. •

If the cable does not meet the MHL standard, the connected device may

malfunction.

If you connect using a commercially available MHL-HDMI conversion adapter, •

you may not be able to charge the connected device or you may not be able to

perform operations from the projector's remote control.

If images are not projected correctly using an MHL cable, disconnect and then •

reconnect the MHL cable.

If you switch the HDMI1/MHL source and the HDMI2 source while playing a movie, •

the movie may freeze. Stop the movie before switching sources.

Connect the ports in either of the following combinations.

When using [Computer1] input port [Audio1] port

When using [Computer2] input port [Audio2] port

For projectors which audio can be input with the USB cable in the USB •

Display function, there is no need to connect the audio cable.

Be sure to connect the projector and the computer directly, not via a •

USB hub.

Connecting with HDMI Cables

If you use a thick HDMI cable, it may disconnect under its own weight.

Use the HDMI cable clamp to secure the cable.

Connecting Using a Computer Cable

Connecting Using a USB Cable

If you output

audio

If you output

audio

■

Switching Images

Input Source Button Image Input Audio Input

Computer1 Computer1 Audio1

HDMI1/MHL HDMI1/MHL HDMI1/MHL

USB USB Display ⇔USB-A USB Display/Audio2*

Computer2 Computer2 Audio2

S-Video S-Video Audio-L/R

Video Video Audio-L/R

HDMI2 HDMI2 HDMI2

LAN LAN LAN/Audio2*

Names and Functions of the Input Source Buttons

Press the Input Source buttons to input images and audio from the device

connected to the port as shown in the following table.

Switching sources may take a while.

* If the projector supports audio transfer using USB display or over a network, audio

is input through USB Display or LAN.

When you use a projector that does not support audio transfer, [Audio 2] is input.

■

Troubleshooting

No images appear

Did you turn on the connected device? Turn on the power of the connected device.

Did you turn on the projector? Press the [Projector] button.

Did you press the correct Input Source

button for the connected device you

want to play?

When no specic input source is selected, [Computer1]

button is automatically selected and images from the

[Computer1] input port are displayed. Press the correct

Input Source button corresponding to the connected

device.

Did you press the [A/V Mute] button? Press the [A/V Mute] button again.

Is the operation indicator light on

If no operations are made on the Connection & Control

Box for eight hours, it enters standby status. Press any

button and the indicator turns to , press the Input

Source button.

The source can not be switched

Did you press the correct Input

Source button corresponding to the

connected device?

Press the correct Input Source button.

Is the Message Broadcasting dialog

displayed?

Press the [Projector] button and restart the projector.

The Connection & Control Box is not operating

Is the power of this product on? Turn on the power switch.

Is the power cable plugged? Plug in the power cable of the Connection & Control Box.

Is the operation indicator ashing

Unplug the power cable of the Connection & Control Box,

and contact your dealer.

No sound comes out or the sound is faint

Is the projector's audio input setting

correct?

Check that the projector's "A/V Settings" or "Audio Input"

are correct. Projector's user's guide

Did you turn down the audio volume

of the projector or speakers too much?

Turn up the volume with the [Volume] dial.

Projector's or Speakers' user's guide.

Is the projector's "MIC Input Level"

appropriate?

Adjust the input level of the microphone.

Is the audio cable of the connected

device correctly connected?

Check the connection of the audio cable. This manual

"Input Ports", Connection & Control Box Installation Manual

"Connecting to the Speaker"

Is there a cable connected to the

projector's audio output port?

If a cable is connected to the projector's audio output

port, sound does not come out from the built-in speaker.

Is the Dip switch setting correct? Check the Dip switch setting. Connection & Control Box

Installation Manual "Connecting to the Speaker"

Blue

Orange

Blue

Product specificaties

Merk:	Epson
Categorie:	Beamer
Model:	ELPCB02
Kleur van het product:	Wit
Gewicht verpakking:	2580 g
Breedte verpakking:	280 mm
Diepte verpakking:	312 mm
Hoogte verpakking:	164 mm
Connectiviteitstechnologie:	Bedraad
Land van herkomst:	China
Aantal per verpakking:	1 stuk(s)
Merkcompatibiliteit:	Epson
Producten per pallet:	80 stuk(s)
Pallet brutohoogte:	1750 mm
Pallet brutobreedte:	800 mm
Pallet brutolengte:	1200 mm
Producten per palletlaag:	8 stuk(s)
Producten per pallet (UK):	120 stuk(s)
Palletlengte (UK):	1200 mm
Producten per palletlaag (UK):	12 stuk(s)
Palletbreedte (UK):	1000 mm
Pallethoogte (UK):	1750 mm