Emko EZM-3735 Handleiding

Emko Niet gecategoriseerd EZM-3735

Lees hieronder de 📖 handleiding in het Nederlandse voor Emko EZM-3735 (64 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 176 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/64
EZM-3735 77x35 DIN Size Digital Timer Controller
Instruction Manual. ENG EZM-3735 01 V04 07/17
- 4 Digits Display
- Operation with One Set value
- Single Contact Output for Timing control ( )
- External Start and Pause Input
- Start and Stop Possibility by front Panel
- Pause possibility by front Panel
- S
- Display can be adjusted to show Second, Minute and Hour
-
- Adjustable internal buzzer according to Timer Stop status.
- Password protection for programming section
- Having CE mark according to European Norms
ON /OFF
et value high limit boundaries
Programmable Time Bases (Second, Minute, Hour)
EZM- 77 x 35 DIN Size3735
Digital Timer Controller
ENGLISH
ENGLISH
ENGLISH
ENGLISHENGLISH
Operating Temperature : 0 to 50 °C
Max. Operating Humidity : 90% Rh (non-condensing)
Altitude : Up to 2000 m.
Forbidden Conditions:
Corrosive atmosphere
Explosive atmosphere
Home applications (The unit is only for industrial applications)
c
1.2 General Specifications
1.Preface
EZM-3735 Programmable Timer can be used in package machines, production and quality
control rollers, and can be adapted easily to all mechanical construction and automation
system. Some application fields which they are used are below:
Application Fields
Package machines,
Quality Control rollers,
Filling Systems,
Building Automation.
Production bands
Tool Benchs,
EZM-3735
2
Output Relay
ON/OFF Operation
1.1 Environmental Ratings
Output
Power Supply
Input
Digital Input
Start Input
230V ( %15) 50/60HzV ±
Optional Supply Voltage
- 30 V Z
115 V ( %15) 50/60Hz,±
24 V ( %15) 50/60Hz,±
10
V
V
Standard
Pause Input Digital Input
3
A visual inspection of this product for possible damage occurred during shipment is
recommended before installation. It is your responsibility to ensure that qualified mechanical
and electrical technicians install this product.
If there is danger of serious accident resulting from a failure or defect in this unit, power off the
system and separate the electrical connection of the device from the system.
The unit is normally supplied without a power supply switch or a fuse. Use power switch and fuse
as required.
Be sure to use the rated power supply voltage to protect the unit against damage and to prevent
failure.
Keep the power off until all of the wiring is completed so that electric shock and trouble with the
unit can be prevented.
Never attempt to disassemble, modify or repair this unit. Tampering with the unit may results in
malfunction, electric shock or fire.
Do not use the unit in combustible or explosive gaseous atmospheres.
During putting equipment in hole on the metal panel while mechanical installation some metal
burrs can cause injury on hands, you must be careful.
Montage of the product on a system must be done with it’s fixing clamps. Do not do the montage
of the device with inappropriate fixing clamp. Be sure that device will not fall while doing the
montage.
It is your responsibility if this equipment is used in a manner not specified in this instruction
manual.
EMKO Elektronik warrants that the equipment delivered is free from defects in material and
workmanship. This warranty is provided for a period of two years. The warranty period starts
from the delivery date. This warranty is in force if duty and responsibilities which are determined
in warranty document and instruction manual performs by the customer completely.
Repairs should only be performed by trained and specialized personnel. Cut power to the
device before accessing internal parts.
Do not clean the case with hydrocarbon-based solvents (Petrol, Trichlorethylene etc.). Use of
these solvents can reduce the mechanical reliability of the device. Use a cloth dampened in
ethyl alcohol or water to clean the external plastic case.
1.3 Installation
1.4 Warranty
1.5 Maintenance
1.6 Manufacturer Company
Manufacturer Information:
Emko Elektronik Sanayi ve Ticaret A.Åž.
Demirtaş Organize Sanayi Bölgesi Karanfil Sk. No:6 16369 BURSA/TURKEY
Phone : +90 224 261 1900
Fax : +90 224 261 1912
Repair and maintenance service information:
Emko Elektronik Sanayi ve Ticaret A.Åž.
Demirtaş Organize Sanayi Bölgesi Karanfil Sk. No:6 16369 BURSA /TURKEY
Phone : +90 224 261 1900
Fax : +90 224 261 1912

Product specificaties

Merk: Emko
Categorie: Niet gecategoriseerd
Model: EZM-3735

Heb je hulp nodig?

Als je hulp nodig hebt met Emko EZM-3735 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Emko

Emko

Emko proop7L Handleiding

14 Maart 2024
Emko

Emko IPERTU Supply Handleiding

14 Maart 2024
Emko

Emko Trans-MidiAMF Handleiding

28 Februari 2024
Emko

Emko GENCHARGER Handleiding

28 Februari 2024
Emko

Emko EZM-4435 Handleiding

27 November 2023
Emko

Emko EZM-3735 Handleiding

27 November 2023
Emko

Emko EZM-7730 Handleiding

27 November 2023
Emko

Emko EZM-4430 Handleiding

27 November 2023
Emko

Emko EZM-9935 Handleiding

27 November 2023
Emko

Emko EZM-4450 Handleiding

27 November 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

MSW

MSW -HRH-600 Handleiding

5 November 2024
MSW

MSW -PCJ-302 Handleiding

5 November 2024
MSW

MSW -ETT-22 Handleiding

5 November 2024
DoorBird

DoorBird MTM56A Handleiding

5 November 2024
Hacienda

Hacienda PWB801 Handleiding

5 November 2024
Hacienda

Hacienda PWB802 Handleiding

5 November 2024
MSW

MSW -ECF1-01 Handleiding

5 November 2024
MSW

MSW -MWC-01 Handleiding

5 November 2024
MSW

MSW -TM01 Handleiding

5 November 2024
Singercon

Singercon CON.DJB01 Handleiding

5 November 2024