Emko ESM-3712-CN Handleiding
Emko
temperature controller
ESM-3712-CN
Lees hieronder de 📖 handleiding in het Nederlandse voor Emko ESM-3712-CN (65 pagina's) in de categorie temperature controller. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/65
ESM-3712-CN 77x35 DIN Size Cooling Controller
ENGLISH
ENGLISH
ENGLISH
ENGLISHENGLISH
- 4 Digits Display
- NTC Input or PTC Input (Must be determined in order.)
- Adjustable temperature offset
- Set value boundaries
- Operation selection of compressor operates continuously,
stops or operates periodically in case of sensor defect
- Compressor protection delays
- Defrost time easily changeable from front panel
- Manual defrost capability from front panel
- Defrost parameters
- Alarm parameters
- Adjustable internal buzzer according to the defrost, sensor
defect and alarm status
- Defrost time and/or manual defrost and/or temperature set
value protection
- Password protection for programming section
- Installing parameters using Prokey
- Remote access, data collecting and controlling with Modbus RTU
- Having CE mark according to European Norms
ESM-3712-CN 77 x 35 DIN Size
Digital , ON / OFF Cooling Controller
Instruction Manual. ENG ESM-3712-CN 01 V06 11/15
ENGLISH
ENGLISH
ENGLISH
ENGLISHENGLISH
Operating Temperature : 0 to 50 °C
Max. Operating Humidity : 90% Rh (non-condensing)
Altitude : Up to 2000 m.
Forbidden Conditions
Corrosive atmosphere
Explosive atmosphere
Home applications (The unit is only for industrial applications)
c
1.2 General Specifications
1.Preface
Application Fields
Food
Machine production industries
etc...
ESM- 2371 -C
Applications
Refrigerators
Air Conditioning
Storages
Freezers
etc...
2
Cooling Function
ON/OFF Operation
1.1 Environmental Ratings
Digital Input
Power Supply
Input
NTC, PTC
230V ( %15) 50/60HzV ±
Optional Supply Voltage
- 30 V Z
115 V ( %15) 50/60Hz,±
24 V ( %15) 50/60Hz,±
10
V
V
Standard
ESM-3712-CN series cooling controllers are designed for controlling cooling process. They
can be used in many applications with their easy-use, On / Off control form and defrost
properties. Some application and application fields which they are used are below:
Evaporator
Sensor Input
NTC,PTC
Cabinet
Sensor Input
Configurable Digital
Input
- Stopping fan
- Stopping compressor
- Stopping fan and
compressor
- Manual defrost
- Alarm
Compressor Input
Defrost Output
Fan Output
Defrost Function
ON/OFF Operation
Fan Control Output
ON/OFF Operation
3
A visual inspection of this product for possible damage occurred during shipment is
recommended before installation. It is your responsibility to ensure that qualified mechanical
and electrical technicians install this product.
If there is danger of serious accident resulting from a failure or defect in this unit, power off the
system and separate the electrical connection of the device from the system.
The unit is normally supplied without a power supply switch or a fuse. Use power switch and fuse
as required.
Be sure to use the rated power supply voltage to protect the unit against damage and to prevent
failure.
Keep the power off until all of the wiring is completed so that electric shock and trouble with the
unit can be prevented.
Never attempt to disassemble, modify or repair this unit. Tampering with the unit may results in
malfunction, electric shock or fire.
Do not use the unit in combustible or explosive gaseous atmospheres.
During putting equipment in hole on the metal panel while mechanical installation some metal
burrs can cause injury on hands, you must be careful.
Montage of the product on a system must be done with it’s fixing clamps. Do not do the montage
of the device with inappropriate fixing clamp. Be sure that device will not fall while doing the
montage.
It is your responsibility if this equipment is used in a manner not specified in this instruction
manual.
EMKO Elektronik warrants that the equipment delivered is free from defects in material and
workmanship. This warranty is provided for a period of two years. The warranty period starts
from the delivery date. This warranty is in force if duty and responsibilities which are determined
in warranty document and instruction manual performs by the customer completely.
Repairs should only be performed by trained and specialized personnel. Cut power to the
device before accessing internal parts.
Do not clean the case with hydrocarbon-based solvents (Petrol, Trichlorethylene etc.). Use of
these solvents can reduce the mechanical reliability of the device. Use a cloth dampened in
ethyl alcohol or water to clean the external plastic case.
1.3 Installation
1.4 Warranty
1.5 Maintenance
1.6 Manufacturer Company
Manufacturer Company Name :
Emko Elektronik A.S .DOSAB Karanfil Sk.No:6 16369 BURSA/TURKEY
Phone: +90 224 261 19 00
Fax: +90 224 261 19 12
Repair and maintenance service information:
Emko Elektronik Sanayi ve Ticaret A.Åž.
Demirtaş Organize Sanayi Bölgesi Karanfil Sk. No:6 16369 BURSA/TURKEY
Phone : +90 224 261 1900
Fax : +90 224 261 1912
ENGLISH
ENGLISH
ENGLISH
ENGLISHENGLISH
Product specificaties
| Merk: | Emko |
| Categorie: | temperature controller |
| Model: | ESM-3712-CN |
Heb je hulp nodig?
Als je hulp nodig hebt met Emko ESM-3712-CN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding temperature controller Emko
13 Juni 2023
Andere handleidingen Emko
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
11 Juni 2024
14 Maart 2024
14 Maart 2024
28 Februari 2024