Elektrobock BPT37 Handleiding

Elektrobock Thermostaat BPT37

Lees hieronder de 📖 handleiding in het Nederlandse voor Elektrobock BPT37 (14 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

BPT37

WIRELESS ROOM THERMOSTAT

BPT37 offers you a variety of applications for temperature control in households, ofﬁces or workshops.

The transmitting unit features comfortable and simple control. The large, well-arranged display informs

you about every current state of the thermostat. Thermal comfort is guaranteed by the possibility of ad-

justing constants (control system) for various heat sources to economize heating power consumption as

much as possible. The new code self-learning system ensures trouble-free operation with high interference

immunity. The wireless version enables easy and quick installation; there is no need for complicated and

tedious installation of the line between the thermostat and boiler involving ﬂoor penetration.

BOILER

cca 35 m

Two-way communication between the receiver and trans-

mitter (high reliability of signal transmission guaranteed)

Backlit display.

Possibility of locating the thermostat (transmitter) wherever

necessary.

The predictive system (smart timer) guarantees the given

temperature at the required time.

The adaptive regulator evaluates the temperature gradient

of the room and is able to determine the necessary time to

reach the required temperature.

The PI regulation system guarantees temperature increase

and its subsequent maintenance at optimum power con-

sumption.

The E-EPROM memory saves all data for an unlimited time

even during power failure.

Selection between PI regulation and hysteresis (0.1 to 1.5 °C).

Six time periods and temperatures for each weekday.

Nine weekly programs (optional).

Even / odd week selection.

Automatic change to WINTER or SUMMER time.

Measured temperature of -9 °C to 39 °C.

Calendar up to 2027.

Automatic indication of boiler maintenance.

Indication of boiler operating hours.

Receiver mains supply of 230V/50Hz.

Receiver with CODE SELF-LEARNING

system and E-EPROM memory (saves

the code even during voltage failure).

A THROUGH-WAY receiver socket for

connecting another device.

transmitter

receiver

version 11.02

BPT37 DESCRIPTION- receiver

potential-free (floating)

contact output for

boiler connection

power supply

230 V/50 Hz

FUNCTION BUTTON

INDICATING LEDs:

GREEN LIT

- indication of mains connection

ORANGE LIT

- relay closed

YELLOW

YELLOW BLINKING

- signal received

RED BLINKING

- empty E-EPROM memory

RED LIT

- FAILURE (if no signal from the transmitter is

detected within approx. 6 hours, it switches

to the “2-min-ON / 8-min-OFF” mode.)

YELLOW

YELLOW+RED BLINKING ALTERNATELY

- code learning mode

YELLOW

YELLOW+RED BLINKING SIMULTANEOUSLY

- code has been learned

THERMOSTAT LOCATION

We recommend that the installation be done by a person with suitable qualifications in electrical engineering!

Incompetent interference or damage voids the guarantee for the product!

1. Switch off the main circuit breaker.

2. Connect the boiler to the potential-free contact outputs (use the room thermostat

terminals – 2 wires).

3. Connect the receiver to the 230 V/ 50 Hz mains.

4. Switch on the main circuit breaker; the green diode lights up on the receiver; the receiver

is ready for operation.

CODE LEARNING (use if the receiver memory has been erased – the red diode blinks):

1, Press the receiver’s “FUNCTION BUTTON” for about 1.5 sec; the yellow and red LEDs start blinking

alternately; and the receiver awaits the code (“learning mode”).

2, Push the “TEST” button on the receiver; the signal sending sign appears on the display.

3, Receipt of the code in the receiver is indicated by simultaneous blinking of the yellow and red diodes;

thus the code has been learnt.

4, After receipt of the code, the output relay is switched several times to verify the correct functioning

of BPT37.

TESTING CORRECT CONNECTION:

On completion of the installation, test the correct connection by pushing the button on

the transmitter.

The boiler will be tested automatically. It switches ON and OFF several times, and the ,

sign appears on the transmitter display; the orange diode on the receiver indicates that the

relay is closed.

Test

SWITCHING FUNCTIONS:

AUT - pworking according to program

ON - permanently switched on

OFF - permanently switched off

through-way socket

for connection

of another device

short press:

start of the code learning mode

long press:

memory clearing

(preset code erased + RESET)

The transmitter must be located as far from interference sources (TV, PC, etc.) as possible; it must not be

placed on a metal base.

For its location, take the thermal properties of the place into account. Owing to bad signal reception,

install the receiver as far from large metal objects as possible (at least 0.5 m).

The receiver is functional immediately after connection to 230 V/ 50 Hz – the GREEN LED lights up.

The output switching contact is galvanically isolated from the control unit.

During installation, make sure that no heavy-current lines run along the thermostat.

INSTALLATION PROCEDURE

BATTERY INSTALLATION AND REPLACEMENT

GST1 module

connector

aerial

backlit character display

During the day, the backlight is

inactive, saving energy. Once it starts

getting dark (2 minutes of twilight), the

display automatically lights up for

approx. 2 s after any button is pushed.

control

buttons

battery

compartment

- Open the battery cover and remove the protective strip; thus the BPT37 becomes functional.

- During replacement, follow the correct polarity indicated in the battery compartment.

- The batteries must be replaced if the symbol starts blinking on the display.

- Always use alkaline batteries, type 2x1,5V typ AA!

(Note: is equipped with an E-EPROM memory which preserves the data saved even in case of voltage

failure)

Dispose of old batteries in conformity with regulations on hazardous waste handling!

BPT37 DESCRIPTION - transmitter

stand assembly

GSM modul

Note: The stand

is delivered with

BPT37

Note: The GSM module is

not delivered with BPT37!

external sensor

connector

Product specificaties

Merk:	Elektrobock
Categorie:	Thermostaat
Model:	BPT37

Heb je hulp nodig?

Als je hulp nodig hebt met Elektrobock BPT37 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermostaat Elektrobock

Elektrobock BT730 Handleiding

12 Maart 2024

Elektrobock PT 32 GST Handleiding

11 September 2023

Elektrobock BPT 32 Handleiding

11 September 2023

Elektrobock PT 14 Handleiding

11 September 2023

Elektrobock PT 713 EI Handleiding

11 September 2023

Elektrobock PT 713 Handleiding

11 September 2023

Elektrobock BPT 22 Handleiding

11 September 2023

Elektrobock BT710 Handleiding

24 Juni 2023

Elektrobock BT102 Handleiding

6 Juni 2023

Elektrobock PT01 Handleiding

13 Mei 2023

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Tru Components TCN4S-24R Handleiding

18 December 2024

Tru Components TK4S-14RC Handleiding

18 December 2024

Tru Components TX4S-14R Handleiding

17 December 2024

Warmup 5iE Handleiding

16 December 2024

Warmup +Kit Handleiding

16 December 2024

Nobo Connect SWT-IZW Handleiding

15 December 2024

Nobo Connect SWT-IZB Handleiding

11 December 2024

Hive Thermostat Handleiding

10 December 2024

GENERAL Life HT15S Handleiding

9 December 2024

GENERAL Life HT15 Handleiding

9 December 2024