Electronics Line Prime Handleiding

Electronics Line Beveiliging Prime

Lees hieronder de 📖 handleiding in het Nederlandse voor Electronics Line Prime (32 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
-2-
infinite prime User Manual - Version 3.00
Catalog Number: 5IN1912
All data is subject to change without prior notice.
Hereby, Electronics Line 3000 Ltd. declares that this control panel is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Copyright © 2012 Electronics Line 3000 Ltd. All rights reserved.
-3-
Quick Reference Guide
Function Press Additional Information
SET
If “One-Key Setting” is disabled enter your user
code when setting.
The default Master code is 1234.
INSTANT SET
Hold down this key until
“Instant Setting OK?” is
displayed. Then Press √.
Instant setting cancels the entry delay after Part or
Perimeter setting. This feature can be enabled by
your engineer.
UNSET [USER CODE] Entering your user code also silences the sounder
in the event of an alarm.
PANIC
ALARM +
Press these keys together and hold them down to
generate an alarm.
FIRE
ALARM +
MEDICAL
ALARM +
MENU MODE then [USER CODE]
Use the menu navigation keys (/) until the required
menu item is displayed then press √. Alternatively, enter
the shortcut (e.g. 21 for Omit Zones).
CHECK
TROUBLE
CONDITIONS Use this key scroll the
system trouble list
Pressing also silences any trouble tones that
may be sounded by the system.
SWITCH HA/PGM
UNIT ON then [HA UNIT #]
Enter the HA module number in two digits
(e.g. 03, or 30 for PGM ).
SWITCH HA/PGM
UNIT OFF then [HA UNIT #]
SERVICE CALL
Hold down this key until
“Service Call Dialing” is
displayed.
The number dialed for the service call is
programmed by your engineer.
GLOBAL
CHIME then
Use the menu navigation keys ( / ) to choose
enable or disable, then press √.
RECORD
MESSAGE then After recording a message, “Message Waiting” is
displayed until the message is played back.
The Message Center is an optional feature that is
included with certain versions of . infinite prime
PLAY
MESSAGE then
Telecontrol Commands
Function Press Function Press
2-WAY AUDIO UNSET
FULL SET SOUNDER CANCEL
HA UNIT XX ON* then EXTEND CALL
HA UNIT XX OFF* then DISCONNECT then
* for PGM XX=30
OR OR

Product specificaties

Merk: Electronics Line
Categorie: Beveiliging
Model: Prime

Heb je hulp nodig?

Als je hulp nodig hebt met Electronics Line Prime stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Beveiliging Electronics Line

Electronics Line

Electronics Line Prime Handleiding

10 November 2022
Electronics Line

Electronics Line EL-2620 Handleiding

10 November 2022
Electronics Line

Electronics Line iConnect Handleiding

10 November 2022
Electronics Line

Electronics Line SecuSelf Set ECKS0608PGTA Handleiding

10 November 2022
Electronics Line

Electronics Line EL-2762 Handleiding

10 November 2022
Electronics Line

Electronics Line EL-2645PI Handleiding

10 November 2022
Electronics Line

Electronics Line SecuPlace Handleiding

10 November 2022

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging

Geemarc

Geemarc SOS-PRO 295 Handleiding

6 Maart 2024
Technaxx

Technaxx TX-106 Handleiding

4 Februari 2024
One2track

One2track Safety Angel Handleiding

16 Oktober 2023
Sygonix

Sygonix SY-3851632 Handleiding

16 Oktober 2023
Sygonix

Sygonix 1326052 Handleiding

16 Oktober 2023
Sygonix

Sygonix 43588A WLAN Camera Handleiding

16 Oktober 2023
Sygonix

Sygonix 43176S LAN Camera Handleiding

16 Oktober 2023
Sygonix

Sygonix SY-3181234 Handleiding

16 Oktober 2023
Sygonix

Sygonix Touch IP65 Handleiding

16 Oktober 2023
Sygonix

Sygonix 1882082 Handleiding

16 Oktober 2023