Ei Electronics Ei225E Handleiding

Ei Electronics Rookmelder Ei225E

Lees hieronder de 📖 handleiding in het Nederlandse voor Ei Electronics Ei225E (32 pagina's) in de categorie Rookmelder. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

BS EN 50291: 2001

MAINS

POWERED

Model Ei 225EN

Model Ei 220EN

- HARD WIRED TO MAINS

- WITH POWER CORD

MAINS POWERED

CARBON MONOXIDE ALARM

Read and retain carefully for as long as the product is being used. It contains vital information

on the operation and installation. The leaflet should be regarded as part of the product.

If you are just installing the unit, the leaflet must be given to the householder. The leaflet is to

be given to any subsequent user.

INSTRUCTIONS

B15584-R0-225EN&220EN-U&C 6/9/07 8:13 AM Page 1

READ THIS FIRST

WHAT TO DO WHEN THE CO ALARM SOUNDS

CARBON MONOXIDE - THE SILENT KILLER!

WHERE TO PLACE CARBON MONOXIDE ALARMS

INSTALLING YOUR CARBON MONOXIDE ALARMS

TESTING YOUR CARBON MONOXIDE ALARMS

MAINTAINING CARBON MONOXIDE ALARMS

LIMITATIONS OF CARBON MONOXIDE ALARMS

HOW TO PROTECT YOUR FAMILY

TECHNICAL SPECIFICATIONS

GETTING YOUR CARBON MONOXIDE ALARMS SERVICED

GUARANTEE

TROUBLESHOOTING

CONTENTS Page

B15584-R0-225EN&220EN-U&C 6/9/07 8:13 AM Page 2

1. READ THIS FIRST

WARNING: The Ei225EN Alarm should be permanently wired to the mains by a

qualified electrician in accordance with IEE wiring regulations (BS7671).

The Ei220EN is just plugged in to the mains.

Install the Carbon Monoxide Alarm (CO Alarm) in every room that contains a fuel

burning appliance, particularly rooms where people spend a lot of time e.g.

bedrooms, kitchens and sitting rooms.

In rooms with an appliance install (preferably) on the ceiling, (300mm from

walls), and between 1m to 3m horizontally from appliance. In rooms remote from

the appliance install at breath level, where the light indicators can be seen.

Regularly check that the green power light is on. Important: The CO Alarm will

not work if the mains supply is off.

Test the unit weekly by pressing the test/hush button-the horn will sound.

Open the unit by sliding the cover up as shown in figure 1. Then remove the

terminal block screw. (Ei225EN only).

Immediately the unit is powered the green light will turn on & the red & amber

lights will flash once to show they are operational.

Replace unit after up to 6 years operation (see ‘Replace by’ date on sidewall

label).

B15584-R0-225EN&220EN-U&C 6/9/07 8:13 AM Page 3

Product specificaties

Merk:	Ei Electronics
Categorie:	Rookmelder
Model:	Ei225E
Kleur van het product:	Wit
Gewicht:	195 g
Breedte:	105 mm
Diepte:	135 mm
Hoogte:	71 mm
Materiaal behuizing:	Kunststof
Internationale veiligheidscode (IP):	IP20
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Montagewijze:	Opbouwmontage
Type stroombron:	AC
Ingangsspanning:	210 - 250 V
Detector type:	Elektrochemische detector
Aantal gelijktijdig verbonden apparaten (max):	10
Bedrijfstemperatuur (T-T):	-10 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	15 - 95 procent
Test knop:	Ja
Alarm decibels:	85 dB
Back-upbatterij:	Nee
Eenvoudig te monteren:	Ja
UL 94 brandbaarheidsnorm:	V0