Edimax DP-240W52V Handleiding

Edimax Niet gecategoriseerd DP-240W52V

Lees hieronder de 📖 handleiding in het Nederlandse voor Edimax DP-240W52V (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

-DIN Rail Power Supply Quick Installation Guide

- 1 -

I. INTRODUCTION:

DP- -240W Series DIN Rail Power Supply can be mounted on TS35/7.5 or

TS35/15 standard DIN Rail.

II. INSTALLATION

II-1. DIN-Rail Mounting

Please follow below Rail Power Supply on the instruction to mount the DIN-

DIN- Rail track.

1. Insert the unit upper end of the DIN-Rail

mounting bracket into the DIN-Rail track from

its upper side.

2. Slide it downward until it hits the stop.

3. Lightly push the bottom of the DIN-Rail

mounting bracket into the track.

4. Check if the DIN-Rail mounting bracket is

tightly attached to the track.

NOTE:

 Mount the unit on DIN-Rail rack in vertical

position to keep the input terminals at the

bottom and output on the top. Other

positions are not allowed such as desktop,

upside down or horizontal mounting.

 Disconnect AC power before installing wiring.

-DIN Rail Power Supply Quick Installation Guide

- 2 -

II-2. W iring AC Power Inputs and DC Output

1. Maintaining good ventilation clearances for DIN Rail power supply,

10mm left and right, 40mm above and 20mm below, in order to

prevent it from overheating.

2. To dissipate heat, please keep 15 cm away from the adjacent heat

source.

3. (100 The AC input - (240V) and DC output 24V/52V) wire recommended

at least 0.8mm² (AWG18) and UL1007 (withstand temperature > 80°C).

AWG

Rated Current of Equipment(Amp)

Cross- ( ) section of Lead mm²

0.8mm²

4. Recommended wire strapping length: 6.5mm(0.255”)

5. AC Power Input Wiring: For AC (100—240V) power input wiring, please

connect to L (Live line), N (Null Line) and GND (Ground) terminals.

Tighten the screws to prevent the wires from

loosening.

6. DC Power Output Wiring: Insert the

Negative / Positive DC wires into the PWR

terminals (V5 V52-, 2+) respectively. Tighten

the screws to prevent the wires from

loosening.

7. “+ V Ad j “ DC Output Voltage Regulator can

adjust the DC voltage from 48V to 56V

8. Insert the wires (no electrical polarity) into

the “DC OK” terminal block (Fault Alarm

Relay). Tighten the screws to prevent the

wires from loosening.

DC Power Output

AC Power Input

DC Output

Voltage

Regulator

Power OK

LED

-DIN Rail Power Supply Quick Installation Guide

- 3 -

III. LED STATUS

Function

Status

Description

DC OK

( )

Green

Power on, ready to supply DC 48-56V

Off

Power off or malfunction

IV. PRODUCT SPECIFICATION

Model

DP- series 240W

Output

Rated voltage

24V

52V

Rated current

10A

4.6A

Current range

0- A 10

0- A 4.6

Rated power

240W

Ripple

< 150mV

< 200mV

Voltage regulation

±2%

Adjustable output

voltage range 24VDC 52VDC

Input

Voltage range

100-240VAC

Frequency range

50Hz Hz-60

Protection

Functions

Short circuit

protection

Swing self-

recovery

Swing self-

recovery

Over current

protection

Swing self-

recovery

Swing self-

recovery

Environment

Operating

temperature

-25 oC to +70 oC (Refer to

"Derating Curve")

Operating humidity

20% - 90 - % RH non condensing

Storage temperature

-40 oC to +85 oC

Store humidity

10% 95% - - RH non condensing

Product specificaties

Merk:	Edimax
Categorie:	Niet gecategoriseerd
Model:	DP-240W52V
Kleur van het product:	Black, Grey
Gewicht:	818 g
Breedte:	114 mm
Diepte:	122 mm
Hoogte:	63 mm
Certificering:	FCC, CE LVD EN62368, UL UL62368, UL CB IEC62368
Duurzaamheidscertificaten:	CE, RoHS
Temperatuur bij opslag:	-40 - 85 °C
Stroomspanning bescherming:	Over current, Over voltage, Short circuit
Luchtvochtigheid bij opslag:	10 - 85 procent
Naleving van duurzaamheid:	Ja
Totaal vermogen:	240 W
DC voltage bereik:	48 -56 V
DC-uitgangsspanning:	52 V
AC-ingangsspanning:	90 - 264 V
AC-ingangsfrequentie:	47 - 63 Hz
Bedrijfstemperatuur (T-T):	-25 - 70 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 90 procent
Type product:	Voeding
DIN rail bevestiging:	Ja