ECOstyle Dual Concealed Thermostatic Shower Handleiding
ECOstyle
Douchesysteem
Dual Concealed Thermostatic Shower
Lees hieronder de 📖 handleiding in het Nederlandse voor ECOstyle Dual Concealed Thermostatic Shower (4 pagina's) in de categorie Douchesysteem. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
Pro
Pro
Pro
ProProduc
duc
duc
ducduct S
t S
t S
t St Specif
pecif
pecif
pecifpecifica
ica
ica
icaication
tion
tion
tiontion
Minimum Pressure 0.5 bar
Maximum Pressure 3.0 bar
Cold Supply Temperature 4 - 20 c
Hot Supply Temperature 55 - 65 c
1/2" male outlets
3/4" female inlets
38c Temperature stop position
Minimum 10c difference between hot supply and mixed outlet temperature
Maximum mixed temperature is recommended no higher than 43c
Pressures should be balanced
Cl
Cl
Cl
ClClean
ean
ean
eaneanin
in
in
ining
g
g
gg
All surfaces should be cleaned using a clean damp cloth.
No abrasive cleaning agents or materials should be used.
IMP
IMP
IMP
IMPIMPORT
ORT
ORT
ORTORTANT
ANT
ANT
ANTANT
Flush system prior to installation
Check for leaks after installation
Hot supply must be on the left.
Check for pipes and wires, before commencing installation
Please retain this manual after installation for future
reference and maintenance.
Pro
Pro
Pro
ProProduct mus
duct mus
duct mus
duct musduct must be ins
t be ins
t be ins
t be inst be installed in co
talled in co
talled in co
talled in cotalled in complianc
mplianc
mplianc
mpliancmpliance
e
e
e e wi
wi
wi
wiwith
th
th
thth
rel
rel
rel
relrelevant
evant
evant
evant evant
Wat
Wat
Wat
WatWater Regulati
er Regulati
er Regulati
er Regulatier Regulations
ons
ons
ons ons and By
and By
and By
and Byand Byelaws
elaws
elaws
elawselaws
EcoStyle
Dual Concealed Thermostatic Shower
Dime
Dime
Dime
DimeDimensio
nsio
nsio
nsionsions
ns
ns
nsns Ins
Ins
Ins
InsInstal
tal
tal
taltall
l
l
llat
at
at
atati
i
i
iion
on
on
onon
Prepare pipes in wall to connect
to shower, with cold on the right.
Ensure these pipes are flushed
before connecting the mixer.
Two 3/4" male fittings will be
required (not supplied) to connect
the water supplies to the mixer.
Two1/2" female fittings will be
required (not supplied) to connect
the mixed water to the outlet
fittings
Ope
Ope
Ope
OpeOpera
ra
ra
raration
tion
tion
tiontion
Offer the mixer into the recess and mark
ixing locations.
Remove the mixer, depending on
he wall type, drill the holes and insert
plugs, if a solid wall.
Screw to a wooden batten if
itting into a stud wall.
Connect pipes to mixer using a suitable
sealing method and then tighten.
Ensure the mixer is level.
Turn on water supply and check
eaks before fitting plate
Ins
Ins
Ins
InsInstal
tal
tal
taltall
l
l
llati
ati
ati
atiation
on
on
onon
Re-calibration
Your product is factory set under balanced pressures, with specific inlet temperatures,
as your site conditions may differ, the temperature stop position may require
re-setting, to achieve the 38c.
Once the mixer has been fitted
and secured, push the concealing Turn the handle to the stop position, remove
plate over the mixer body, sealant screw cover and loosen grub screw, inside
should be applied between the plate handle.
and the wall.
Pull the handle from the mixer. DO NOT
Next push on the flow control
remove the plastic stop ring.
handle on to the top valve in the mixer,
tighten the grub screw using Turn the spindle until the 38c is achieved, onc
an allen key and insert screw cover. this has been reached, replace the handle, so that the stop pin inside sits against the stop ring.
Thermostat removal
(Turn off water supply)
Over a period of time, lime scale or debris build up may occur and could affect the performance
of the thermostat.
Fit temperature control handle to Cleaning of the thermostat could
thermostat, ensuring the stop pin assist in returning the thermostat
inside the handle, is located against to its original performance.
the top of the stop ring.
Remove the handle from the mixer,
To test this, once fitted, turn the handle
remove the stop ring and
to cold, then back to the stop position, unscrew the chrome shroud.
press the button and continue to turn.
Using a spanner remove the
If the handle does no function correctly thermostatic cartridge.
remove and re-assemble. Run this under warm water and rub or wipe to remove build up.
Product specificaties
| Merk: | ECOstyle |
| Categorie: | Douchesysteem |
| Model: | Dual Concealed Thermostatic Shower |
Heb je hulp nodig?
Als je hulp nodig hebt met ECOstyle Dual Concealed Thermostatic Shower stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Douchesysteem ECOstyle
15 Augustus 2023
Handleiding Douchesysteem
- Douchesysteem IKEA
- Douchesysteem Panasonic
- Douchesysteem Delta
- Douchesysteem Dimplex
- Douchesysteem GRE
- Douchesysteem Hansgrohe
- Douchesysteem Haws
- Douchesysteem Hozelock
- Douchesysteem Miomare
- Douchesysteem Juno
- Douchesysteem Fieldmann
- Douchesysteem Curaqua
- Douchesysteem Schütte
- Douchesysteem Thermomate
- Douchesysteem Sani-Lav
- Douchesysteem Fala
- Douchesysteem Omnires
- Douchesysteem Pulse ShowerSpas
- Douchesysteem BMI
- Douchesysteem Belanger
Nieuwste handleidingen voor Douchesysteem
4 September 2024
29 Augustus 2024
11 Juli 2024
11 Juli 2024
10 Juli 2024
10 Juli 2024
10 Juli 2024
10 Juli 2024
10 Juli 2024
5 Juli 2024