Eberspacher Mini-Clock Handleiding

Eberspacher Verwarming Mini-Clock

Lees hieronder de 📖 handleiding in het Nederlandse voor Eberspacher Mini-Clock (1 pagina's) in de categorie Verwarming. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Operating / Installation Instructions

Mini-Clock

20:05

General remarks

Setting and operating the Mini-Clock

• If a key is not depressed within 15 seconds, the display will return

to its initial state – Current time.

• When setting the time with the keys 2 or 3, the setting speed is

accelerated when the key is kept depressed.

• Up to three preset times can be set and activated on this Mini-

Clock. Each preset time is deactivated after the heating period,

and it must be newly activated for each new heating period – see

activate / deactivate the preset time.

Setting functions on the Mini-Clock

Setting-up for the first time:

After connection to the power supply all symbols on the display will

start to flash. The heater cannot be turned on in this state. The

current time has to be set first.

Press key 1: The clock time flashes. Set the time with key 2 or 3.

Press key 1: The time is displayed; the colon flashes.

Setting the time:

Press key 1 for more than 3 seconds: The time flashes. Set the time

with key 2 or 3. Press key 1 within 5 seconds: The time is displayed

and the colon flashes.

Note:

If, after the time has been set, key 1 is not pressed within 5 seconds,

the Mini-Clock will be transferred to the mode “Setting the Heating

Time”.

Setting the heating time:

Press key 1 for more than 3 seconds: The time flashes. The Mini-

Clock is automatically transferred to the mode “Setting the Heating

Time” if no key is pressed for 5 seconds.

The heating symbol is displayed, and the heating time flashes.

Set the heating time (10 to 120 minutes) with key 2 or 3.

Press key 1: The time is displayed once again and the colon flashes.

Setting the preset time:

Press key 1 once, twice or three times to call the preset time 1, 2

or 3. The display will then indicate the preset time, for instance 1

and symbol 1. Set the preset time with key 2 or 3. The preset time

is activated or deactivated with key 4. The “ON” symbol is displayed

when the preset time has been activated.

Symbol 1, 2 or 3 is displayed when the preset time is activated.

Operating functions of the Mini-Clock

Switching on the heater:

Press key 4. The heating duration is … minutes.

The display indicates the remaining heating time and symbol 7.

Switching off the heater:

Press key 4. The heating continues for approx. 3 minutes.

The display indicates the current time.

1Key to activate the setting capabilities

2 / 3 Time setting keys forwards / backwards

4ON / OFF key to activate / deactivate the preset time

5Current time, preset time and heating time

6Symbol for activated preset time

7Symbol for heater operation

8Symbol for preset time 1, 2 or 3

Continuous operation:

Press key 3 and keep it depressed while pressing key 4. The

heater will now remain switched on until key 4 (switching off the

heater) is pressed again.

Preset time – Activate / deactivate:

Press key 1 to select the preset time 1, 2 or 3. Activate or deacti-

vate the preset time with key 4.

The “ON” symbol is displayed when the preset time is activated.

Symbol 1, 2 or 3 is displayed when the preset time is activated.

Special functions only in conjunction

with the TP41 / TP41i remote control

Programming the receiver to recognize the transmitter:

Press key 2 and keep it depressed while pressing key 4.

The display indicates 2 horizontal lines.

The display returns to its initial state when the receiver has been

successfully programmed. The display automatically returns to the

initial status after 35 seconds if the transmitter is not recognized. In

this case repeat the above procedure once again.

Installing and connecting the Mini-Clock

Follow the drawing to install the Mini-Clock.

The drilling template (can be peeled off and is self-adhesive)

is applied on the front.

Follow the diagram to connect the Mini-Clock.

Note:

Do not press the display and control panel when installing the Mini-

Clock.

Connecting diagram

20:05

o 7,5

o 2,5

Eberspächer

Mounting drawing

1 3

2 4

B1 S1

88:88

0,5 br

0,5 ge

0,5 rt

4 3 2 1

Drilling template Resilient base

for uneven mounting surfaces

Connection for TP41 / TP41i remote control

Plug and socket case are shown from the line entry side.

Product specificaties

Merk:	Eberspacher
Categorie:	Verwarming
Model:	Mini-Clock

Heb je hulp nodig?

Als je hulp nodig hebt met Eberspacher Mini-Clock stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verwarming Eberspacher

Eberspacher Dual Air Handleiding

11 September 2023

Eberspacher D4S Handleiding

11 September 2023

Eberspacher AIRTRONIC D2 Handleiding

11 September 2023

Eberspacher Mini-Clock Handleiding

11 September 2023

Eberspacher Mini Programmer - Modulator Handleiding

11 September 2023

Eberspacher EasyStart Pro Handleiding

11 September 2023

Eberspacher EasyStart Web Handleiding

11 September 2023

Eberspacher AIRTRONIC D4 Handleiding

11 September 2023

Handleiding Verwarming

Nieuwste handleidingen voor Verwarming

Eurom Mon Soleil Verre - Glass Handleiding

12 December 2024

Suntec Klimatronic Heat Stream Spa 2000 design LED Handleiding

11 Oktober 2024

Sonnenkonig TYP 8AF Handleiding

10 September 2024

Suntec Klimatronic Heat Supreme 2000 glass panel Handleiding

11 Oktober 2024

Sonnenkonig TYP 8F Handleiding

10 September 2024

Rowi HBS 1800 3-1 HBS Premium Plus Handleiding

19 September 2024

Rowi HGH 10000-3 Inox Basic Handleiding

19 September 2024

Rowi HGO 4200-1 BF Handleiding

19 September 2024

Suntec klimatronic Heat Wave Style 2000 Eco Handleiding

11 Oktober 2024

Suntec Klimatronic Heat Tower PTC 2000 humid Handleiding

11 Oktober 2024