E-flite EFLDF32 Handleiding

E-flite Radiografisch bestuurbaar speelgoed EFLDF32

Lees hieronder de 📖 handleiding in het Nederlandse voor E-flite EFLDF32 (4 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Delta-V 32 80mm EDF Instructions

Thank you for purchasing the E-flite Delta-V 32 80mm EDF (EFLDF32). This electric ducted fan unit is an ideal choice for products

such as E-flite’s Habu 32 DF and other similar sized ducted fan airplanes. The Delta-V 32 80mm EDF is also an ideal choice for

ducted fan airplanes requiring 80mm diameter fan units. The BL32 Ducted Fan Brushless Motor, 2150Kv (EFLM3032DFA) is purpose-

built for this Delta-V 32 80mm EDF and both products will provide great performance.

Delta-V 32 80mm EDF Features:

• High-performance, efficient design with quick assembly time

• Injection molded, high strength fiberglass-filled Polyphenylene Sulfide [PPS] plastic

• Factory-balanced 80mm 5-blade rotor design

• Aluminum collet with integrated spinner designed for motors with 5mm shaft

• Includes center body fairing to reduce drag

• Designed for 28mm diameter motors

• Purpose-built for recommended E-flite BL32 Ducted Fan Brushless Motors

Delta-V 32 80mm EDF Specifications

Rotor Diameter: 80.0mm (3.15 in)

Shroud Outside Diameter: 83.0mm (3.25 in)

Shroud Length: 66.0mm (2.60 in)

Shroud Length (Including Intake Ring): 82.0mm (3.20 in)

Motor Casing Diameter: 28.3mm (1.10 in)

Overall Weight: 116 g (4.10 oz)

Delta-V 32 80mm EDF Performance

Installed Data*

Installed Static Thrust: 4.50 lbs

RPM: 38,500

Watts: 1,400

Current: 62A

* Data measured installed in Habu 32 DF using BL32 DF Brushless Motor, 2150Kv & 6S 5000mAh 30C Battery (EFLB50006S30)

Static Data*

Static Thrust: 5.40 lb on 6S (21.9V)

RPM: 39,640 on 6S (21.9V)

Watts: 1,160 on 6S (21.9V)

Current: 53A on 6S (21.9V)

*Data measured in lab conditions using bell mouth intake and tail pipe measuring 159mm in length with 72.0mm exit diameter

Examples of Airplane Setups:

E-flite Habu 32 DF ARF (EFL8075)

Comments – High performance ducted fan on 6S

Weight w/Battery: 7.05 - 7.40 lb (3.20 - 3.35 kg)

Motor: BL32 Ducted Fan Brushless Motor, 2150Kv (EFLM3032DFA)

Battery: 5000mAh 6S 22.2V 30C Li-Po (EFLB50006S30)

ESC: 80A Pro SB Brushless (EFLA1080)

Accessories and Spare Parts:

EFLDF321 Rotor, 5-blade: Delta-V 32

EFLDF322 Aluminum Spinner Nut w/Set Screw: Delta-V 32

EFLDF153 Center Body Fairing, 28mm: EDF

EFLDF324 Intake Ring: Delta-V 32

EFLM3032DFA BL32 Ducted Fan Brushless Motor, 2150Kv

EFLA1080 80A Pro Switch-mode BEC Brushless ESC

EFLA110 Power Meter (measures power output in amps, volts, watts, and capacity)

EFLA249 Bullet Connector Set, Gold, 4mm (3)

Battery Choices:

EFLB50006S30 5000mAh .36S 22.2V 30CLi-Po, 10AWG EC5

EFLB50006S50 5000mAh 6S 22.2V 50CLi-Po, 10AWG EC5

THP50006SP45 5000mAh 6C/6S 22.2V G4 Pro Power 45C Li-Po

There are many Li-Po battery brands on the market with several choices for consumers. We recommend either E-flite or Thunder

Power batteries and list some possible choices for the BL32 DF Brushless Motor, depending on the airplane application.

Installation Instructions:

The Delta-V 32 decal is on the top side of the fan unit. Also the center mold line of the fan unit is on the bottom side of the mounting

tabs. This will help you orientate the fan properly before installing into your airplane.

1. Slide the motor wires into the center body fairing as shown. 2. Connect the center body fairing to the back of the motor using the

two 2mm x 5mm screws provided. Note: You may want to trial fit the

center body fairing so you can make sure the wires are accessible to

plug into the ESC when the motor is attached to the fan unit. You

may have to re-position the fairing before attaching to the motor.

3. Slide the threaded shaft onto the motor shaft and tighten 4. Attach the motor to the fan unit using the two 3mm x 5mm screws

both set screws. Use removable blue thread lock. provided.

5. Install the rotor 6. Screw the spinner onto the threaded shaft and tighten while holding

the spinner in place making sure it is secure. Use an L-wrench or

something similar to help tighten the spinner.

EDF Safety Precautions:

This EDF unit contains a rotating part so use extreme caution. Never operated the EDF with loose clothing that can get caught in

the rotor, and never operate the EDF while holding it in your hands. Please read the warning information included with your motor for

safety information related to the operation of motors with propellers. Failure to comply with these warnings and/or improper use of

propellers and EDF units may result in serious injury.

WARRANTY AND REPAIR POLICY

Warranty Period

Exclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the “Product”) will be free from defects in

materials and workmanship at the date of purchase by the Purchaser.

Limited Warranty

Horizon reserves the right to change or modify this warranty without notice and disclaims all other warranties, express or

implied.

(a) This warranty is limited to the original Purchaser (“Purchaser”) and is not transferable. REPAIR OR REPLACEMENT AS

PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those

Products purchased from an authorized Horizon dealer. Third party transactions are not covered by this warranty. Proof of purchase is

required for all warranty claims.

(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE

PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE

REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

(c) Purchaser Remedy- Horizon’s sole obligation hereunder shall be that Horizon will, at its option, (i) repair or (ii) replace, any

Product determined by Horizon to be defective. In the event of a defect, these are the Purchaser’s exclusive remedies. Horizon

reserves the right to inspect any and all equipment involved in a warranty claim. Repair or replacement decisions are at the sole

discretion of Horizon. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse,

negligence, commercial use, or modification of or to any part of the Product. This warranty does not cover damage due to improper

installation, operation, maintenance, or attempted repair by anyone other than Horizon. Return of any Product by Purchaser must be

approved in writing by Horizon before shipment.

Damage Limits

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR

PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED

IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability of Horizon exceed the

individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or

misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user

accepts all resulting liability.

If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are advised to return

this Product immediately in new and unused condition to the place of purchase.

Law: These Terms are governed by Illinois law (without regard to conflict of law principals).

WARRANTY SERVICES

Questions, Assistance, and Repairs

Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or use of the

Product has been started, you must contact Horizon directly. This will enable Horizon to better answer your questions and service you

in the event that you may need any assistance. For questions or assistance, please direct your email to

productsupport@horizonhobby.com, or call 877.504.0233 toll free to speak to a Product Support representative. You may also find

information on our website at www.horizonhobby.com.

Inspection or Repairs

If this Product needs to be inspected or repaired, please use the Horizon Online Repair Request submission process found on our

website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping

carton. Please Note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional

protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for

merchandise until it arrives and is accepted at our facility. An Online Repair Request is available at www.horizonhobby.com under the

Repairs tab. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with

instructions for submitting your product for repair. When calling Horizon, you will be asked to provide your complete name, street

address, email address and phone number where you can be reached during business hours. When sending product into Horizon,

please include your RMA number, a list of t problem. A copy of your original saleshe included items, and a brief summary of the receipt

must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the

shipping carton.

Notice: Do not ship batteries to Horizon. If you have any issue with a battery, please contact the appropriate Horizon Product

Support office.

Product specificaties

Merk:	E-flite
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	EFLDF32
Kleur van het product:	Zwart
Gewicht:	116 g
Soort:	Radio-Controlled (RC) Model Parts
Compatibiliteit:	Habu 32x DF ARF